|
Joined: Nov 2016
Posts: 479
Campfire Member
|
OP
Campfire Member
Joined: Nov 2016
Posts: 479 |
Any experience with this powder in 223? My bullet weights never exceed 60 gr. Also seen a few posts elsewhere of people using it in a 204. Local gun store seems to always have it in stock and just curious how it works.
|
|
|
|
Joined: Dec 2020
Posts: 734
Campfire Regular
|
Campfire Regular
Joined: Dec 2020
Posts: 734 |
I would have got him too but a Dad Blam snow flake hit me in da eye....
|
|
|
|
Joined: Feb 2010
Posts: 15,648
Campfire Ranger
|
Campfire Ranger
Joined: Feb 2010
Posts: 15,648 |
With the 222Magnum being nearly identical to the 223 I used 223 data with IMR 4166 in a 222 Magnum in a Rem 40-X. With the 50 gr Ballistic Tips, Nosler brass and CCI 400, I went from 24.0 to 26.0 in 1/2 grain increment. Velocity increases were linear and with the 28” barrel I got 2965 fps at 24.0 grs and up to 3215 at 26.0 grs. Accuracy was very good with five, 5 shot groups of 0.3, 0.4, 0.5, 0.4, 0.25 inches. So nice accuracy, just a little slow.
With CFE 223 (again in the 222 Mag and the 40-X) and same cases, bullet, etc and 1/2 gr increments, 27.0 grs gave 3115 fps, 28.5 grs gave 3345 fps. Four, 5 shot groups were 0.55, 0.5, 0.75, 0.4 inches so better velocities and close to the accuracy with IMR 4166.
NRA Life,Endowment,Patron or Benefactor since '72.
|
|
|
|
Joined: Nov 2016
Posts: 479
Campfire Member
|
OP
Campfire Member
Joined: Nov 2016
Posts: 479 |
With the 222Magnum being nearly identical to the 223 I used 223 data with IMR 4166 in a 222 Magnum in a Rem 40-X. With the 50 gr Ballistic Tips, Nosler brass and CCI 400, I went from 24.0 to 26.0 in 1/2 grain increment. Velocity increases were linear and with the 28” barrel I got 2965 fps at 24.0 grs and up to 3215 at 26.0 grs. Accuracy was very good with five, 5 shot groups of 0.3, 0.4, 0.5, 0.4, 0.25 inches. So nice accuracy, just a little slow.
With CFE 223 (again in the 222 Mag and the 40-X) and same cases, bullet, etc and 1/2 gr increments, 27.0 grs gave 3115 fps, 28.5 grs gave 3345 fps. Four, 5 shot groups were 0.55, 0.5, 0.75, 0.4 inches so better velocities and close to the accuracy with IMR 4166.
Thanks for the info! That sounds pretty similar as comparing it to Varget and Benchmark which is what I typically use. It sounds like it will be roughly 120-150 FPS slower than the other two. I really wouldn’t be concerned about that decrease in speed as long as it is accurate, and in your case it sounds like it was.
|
|
|
|
573 members (1lesfox, 10gaugemag, 11point, 007FJ, 12344mag, 160user, 57 invisible),
2,926
guests, and
1,236
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,191,357
Posts18,468,926
Members73,931
|
Most Online11,491 Jul 7th, 2023
|
|
|
|