|
Joined: Aug 2015
Posts: 541
Campfire Regular
|
OP
Campfire Regular
Joined: Aug 2015
Posts: 541 |
Been reloading since I was 13, never used nickel plated brass, but now have some.
Might be a dumb question but...does the obvious difference in how it feels to the touch ("slicker" than s***) carry forward to when it is fired and result in less grip to chamber walls and more thrust to the bolt?
|
|
|
|
Joined: Jan 2001
Posts: 10,914
Campfire Outfitter
|
Campfire Outfitter
Joined: Jan 2001
Posts: 10,914 |
Lots of high psi rifle and handgun cartridges are loaded in nickel cases. I use them for my wife’s .338 WM with pretty warm loads.....no apparent issues.
I would assume no real discernible difference, provided that the chamber nor the case is slick with lube! JMO. memtb
You should not use a rifle that will kill an animal when everything goes right; you should use one that will do the job when everything goes wrong." -Bob Hagel
“I’d like to be a good rifleman…..but, I prefer to be a good hunter”! memtb 2024
|
|
|
|
Joined: Dec 2004
Posts: 5,112
Campfire Tracker
|
Campfire Tracker
Joined: Dec 2004
Posts: 5,112 |
I do not think there is a slickness problem, but you will probably will have to set you sizer die different than for straight brass for head spacing.
"The significant problems we face cannot be solved at the same level of thinking we were at when we created them." Albert Einstein
At Khe Sanh a sign read "For those who fight for it, life has a flavor the protected never knew".
|
|
|
|
Joined: Aug 2011
Posts: 6,518
Campfire Tracker
|
Campfire Tracker
Joined: Aug 2011
Posts: 6,518 |
I’m NAGW, and I may be the exception, but I’ve never reloaded any nickel plated brass.
If we live long enough, we all have regrets. But the ones that nag at us the most are the ones in which we know we had a choice.
Doug
|
|
|
|
Joined: Jun 2005
Posts: 12,325
Campfire Outfitter
|
Campfire Outfitter
Joined: Jun 2005
Posts: 12,325 |
I load Winchester's nickel plated brass in my .280 Rem. so as to differentiate between .270 and .280 brass. I haven't had any problems with the nickel plated brass. I even anneal them the same way as yellow brass. Paul B.
Our forefathers did not politely protest the British.They did not vote them out of office, nor did they impeach the king,march on the capitol or ask permission for their rights. ----------------They just shot them. MOLON LABE
|
|
|
|
Joined: May 2003
Posts: 23,024
Campfire Ranger
|
Campfire Ranger
Joined: May 2003
Posts: 23,024 |
Murkydismal: I have used "nickel plated" brass for my reloading/shooting for a VERY long time. Probably 50+ years. I use nickel plated brass in some of my Rifles in calibers: 17 Remington 22 Hornet 222 Remington 223 Remington 22-250 Remington 220 Swift 243 Winchester 280 Remington 308 Winchester Never had even problem #1 with them nor with the dies I load them in. I like nickel plated brass - always have. Hold into the wind VarmintGuy
|
|
|
|
Joined: Nov 2006
Posts: 10,790
Campfire Outfitter
|
Campfire Outfitter
Joined: Nov 2006
Posts: 10,790 |
I do not think there is a slickness problem, but you will probably will have to set you sizer die different than for straight brass for head spacing. Why?
Mathew 22: 37-39
|
|
|
|
Joined: Apr 2020
Posts: 102
Campfire Member
|
Campfire Member
Joined: Apr 2020
Posts: 102 |
I used to load .45 ACP nickle brass. Taper crimped. I thought I had problems getting the nickle brass to hold tightly to the bullet. No problem with nonplated brass so I gave all of my nickle brass away. Maybe just my imagination. No problems noted with .40 or 9mm.
|
|
|
|
Joined: Dec 2004
Posts: 5,112
Campfire Tracker
|
Campfire Tracker
Joined: Dec 2004
Posts: 5,112 |
Why? Nickle plated brass is 'stiffer' than regular brass. I set my sizing die for the brass to just clear compressed fit when bolt closed. In all the nickle plated brass I have used over the years, I have needed to set the die a bit lower to get the head space fit up I want. I size to fit a specific guns chamber on my bolts and single shot guns. Just me I guess. Maybe most everyone else sizes down further to start out.
"The significant problems we face cannot be solved at the same level of thinking we were at when we created them." Albert Einstein
At Khe Sanh a sign read "For those who fight for it, life has a flavor the protected never knew".
|
|
|
|
Joined: Oct 2021
Posts: 2,386
Campfire Regular
|
Campfire Regular
Joined: Oct 2021
Posts: 2,386 |
Biggest problem I've ever had is it is tough on case trimmer cutter heads. Nickle is hard.
"Aim right, squeeze light" " Might as well hit what you're aiming at, it kicks the same whether you miss or not" NRA Life, GOA
|
|
|
|
Joined: Aug 2010
Posts: 48,020
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Aug 2010
Posts: 48,020 |
Biggest problem I've ever had is it is tough on case trimmer cutter heads. Nickle is hard. Exactly this^^^
I try to stick with the basics, they do so well. Nothing fancy mind you, just plain jane will get it done with style. You want to see an animal drop right now? Shoot him in the ear hole. BSA MAGA
|
|
|
|
Joined: Oct 2007
Posts: 14,235
Campfire Outfitter
|
Campfire Outfitter
Joined: Oct 2007
Posts: 14,235 |
I have found nickel plated brass to be good for AI cartridges
Its all right to be white!! Stupidity left unattended will run rampant Don't argue with stupid people, They will drag you down to their level and then win by experience
|
|
|
|
Joined: Apr 2010
Posts: 3,044
Campfire Tracker
|
Campfire Tracker
Joined: Apr 2010
Posts: 3,044 |
Been reloading since I was 13, never used nickel plated brass, but now have some.
Might be a dumb question but...does the obvious difference in how it feels to the touch ("slicker" than s***) carry forward to when it is fired and result in less grip to chamber walls and more thrust to the bolt? It's also more brittle. Had a factory Winchester 7-08 cartridge split upon firing and got hot powder and gas to the face. I'll take the brass made of brass, thanks.
"The trouble ain't that there is too many fools, but that lightening ain't distributed right." - Mark Twain
|
|
|
|
Joined: Nov 2019
Posts: 788
Campfire Regular
|
Campfire Regular
Joined: Nov 2019
Posts: 788 |
I used to load .45 ACP nickle brass. Taper crimped. I thought I had problems getting the nickle brass to hold tightly to the bullet. Any chance the nickel plated .45s were Remington? And were you using .451" jacketed/cast bullets?
|
|
|
|
Joined: Jun 2005
Posts: 12,325
Campfire Outfitter
|
Campfire Outfitter
Joined: Jun 2005
Posts: 12,325 |
Been reloading since I was 13, never used nickel plated brass, but now have some.
Might be a dumb question but...does the obvious difference in how it feels to the touch ("slicker" than s***) carry forward to when it is fired and result in less grip to chamber walls and more thrust to the bolt? It's also more brittle. Had a factory Winchester 7-08 cartridge split upon firing and got hot powder and gas to the face. I'll take the brass made of brass, thanks. Nickel brass is brass. Early nickel plated brass was just that but current "plated" brass appears to be more of a wash than actual plating. At least that's what it looks like on my Winchester .280 Rem. brass. Seems to wear off fairly quickly after a few sessions in the tumbler. Paul B.
Our forefathers did not politely protest the British.They did not vote them out of office, nor did they impeach the king,march on the capitol or ask permission for their rights. ----------------They just shot them. MOLON LABE
|
|
|
|
Joined: Mar 2018
Posts: 3,445
Campfire Tracker
|
Campfire Tracker
Joined: Mar 2018
Posts: 3,445 |
Am liking the Starline nickel .45-70, .44 mag and .480 Ruger cases.
Don't ask me about my military service or heroic acts...most of it is untrue.
Pronoun: Yes, SIR !
|
|
|
|
Joined: Jul 2001
Posts: 60,080
Campfire Kahuna
|
Campfire Kahuna
Joined: Jul 2001
Posts: 60,080 |
/quote]
It's also more brittle.
Had a factory Winchester 7-08 cartridge split upon firing and got hot powder and gas to the face.
I'll take the brass made of brass, thanks. [/quote]
Have not found that to be true--especially because nickel-plated brass is just that--brass plated with a thin coat of nickel. There are NO cases made entirely of nickel.
Dunno why the 7mm-08 case you cite split, but it was NOT due to being nickel-plated.
“Montana seems to me to be what a small boy would think Texas is like from hearing Texans.” John Steinbeck
|
|
|
|
Joined: May 2017
Posts: 4,907
Campfire Tracker
|
Campfire Tracker
Joined: May 2017
Posts: 4,907 |
I have used nickel plated brass in .257 Roberts, .35 Whelen, and .30-06 without issues. The .35W is all fired Federal brass from Trophy Bonded Bear Claw ammo and the others are (were) new Remington bulk brass. I saw someone here on the Fire had some nickel plated .300 Weatherby cases. Now that would bring the bling!
Life Member NRA, RMEF, American Legion, MAGA. Not necessarily in that order.
|
|
|
|
Joined: Apr 2006
Posts: 3,323
Campfire Tracker
|
Campfire Tracker
Joined: Apr 2006
Posts: 3,323 |
I prefer nickeled cases when I can find them as they don't scuz up so bad in the wet conditions here. Having used them in both pistol and rifle applications for a couple decades, I can say there's no difference between plated and unplated brass. Now, if anyone has any nickel plated .458 cases they want to part with.........help a brother out!
|
|
|
|
Joined: Oct 2019
Posts: 1,078
Campfire Regular
|
Campfire Regular
Joined: Oct 2019
Posts: 1,078 |
I had a 17 rem built several years ago with a fairly tight chamber. During initial load development I used R-P brass ( non nickel plated). I then bought a few hundred R-P brass that were nickel. I used the same load data as before and it was clearly over pressure. I assumed it was due to the necks being thicker from the nickel plating and there not being enough room in the throat of the chamber to allow the neck to swell and let go of the bullet. I went back to std brass and the problem went away. That nickel brass now belongs to a Rem 700 .17 and I’ve. Never had any issues with it in the other rifle. I thought about turning the necks a bit but never tried that.
|
|
|
|
567 members (1lesfox, 10gaugemag, 11point, 007FJ, 12344mag, 160user, 57 invisible),
2,912
guests, and
1,230
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,191,357
Posts18,468,926
Members73,931
|
Most Online11,491 Jul 7th, 2023
|
|
|
|