Home Forums Hunting & Shooting Gunsmithing Mauser ejection help

Previous Thread

Next Thread

Re: Mauser ejection help sqweeler #17205418 04/29/22 Joined: Feb 2007 Posts: 4,043 L.I. N.Y. S sqweeler OP Campfire Tracker OP sqweeler Campfire Tracker S Joined: Feb 2007 Posts: 4,043 L.I. N.Y. So if I slowly followed the same contour as the standard claw until it snugly held the magnum case......?? Should I check tension on the ejector spring. Last edited by sqweeler; 04/29/22.

Re: Mauser ejection help z1r #17207671 04/30/22 Joined: Jan 2001 Posts: 59,133 WI. R Redneck Campfire Kahuna Redneck Campfire Kahuna R Joined: Jan 2001 Posts: 59,133 WI. My bad - you. are right. Ex- USN (SS) '66-'69 Pro-Constitution. LET'S GO BRANDON!!!

Re: Mauser ejection help sqweeler #17210881 05/01/22 Joined: Feb 2007 Posts: 4,043 L.I. N.Y. S sqweeler OP Campfire Tracker OP sqweeler Campfire Tracker S Joined: Feb 2007 Posts: 4,043 L.I. N.Y. New extractor.Hold's the case nicely.Case make's it out halfway then falls back in on the follower.Maybe ejector a few thou too short?Ordered one. Last edited by sqweeler; 05/01/22.

Re: Mauser ejection help sqweeler #17211313 05/01/22 Joined: Jan 2001 Posts: 59,133 WI. R Redneck Campfire Kahuna Redneck Campfire Kahuna R Joined: Jan 2001 Posts: 59,133 WI. Yeah, could be.. Looks like the case is hitting the back edge of the ejection port.. If the ejector was a bit more forward, it should clear the case easily.. Ex- USN (SS) '66-'69 Pro-Constitution. LET'S GO BRANDON!!!

Re: Mauser ejection help sqweeler #17214869 05/02/22 Joined: Aug 2009 Posts: 9,919 SE, Iowa B blanket Campfire Outfitter blanket Campfire Outfitter B Joined: Aug 2009 Posts: 9,919 SE, Iowa Are you pulling the bolt back slowly? If so mausers were made to eject by pulling the bolt back briskly. There is no spring loaded ejector

Re: Mauser ejection help blanket #17219345 05/04/22 Joined: Sep 2004 Posts: 2,701 Lakewood, CO z1r Campfire Regular z1r Campfire Regular Joined: Sep 2004 Posts: 2,701 Lakewood, CO Originally Posted by blanket Are you pulling the bolt back slowly? If so mausers were made to eject by pulling the bolt back briskly. There is no spring loaded ejector Racking the bolt hard won't resolve anything if the extractor isn't properly fitted.

Re: Mauser ejection help z1r #17221273 05/04/22 Joined: Aug 2009 Posts: 9,919 SE, Iowa B blanket Campfire Outfitter blanket Campfire Outfitter B Joined: Aug 2009 Posts: 9,919 SE, Iowa Your right if it is not fitted correct but it sure as [bleep] wouldn't function right if you pull back slowly

Re: Mauser ejection help sqweeler #17221278 05/04/22 Joined: Aug 2009 Posts: 9,919 SE, Iowa B blanket Campfire Outfitter blanket Campfire Outfitter B Joined: Aug 2009 Posts: 9,919 SE, Iowa Your right if it is not fitted correct but it sure as [bleep] wouldn't function right if you pull back slowly

Re: Mauser ejection help sqweeler #17221301 05/04/22 Joined: Sep 2004 Posts: 2,701 Lakewood, CO z1r Campfire Regular z1r Campfire Regular Joined: Sep 2004 Posts: 2,701 Lakewood, CO Uh, yes it does. Don't recommend slow-mo, but no need to rack it back at 90 mph either.

Re: Mauser ejection help sqweeler #17226934 05/06/22 Joined: Aug 2009 Posts: 9,919 SE, Iowa B blanket Campfire Outfitter blanket Campfire Outfitter B Joined: Aug 2009 Posts: 9,919 SE, Iowa Extractor holds the case now ejector needs longer. But could fail to eject with loaded rounds

Re: Mauser ejection help sqweeler #17266899 05/21/22 Joined: Feb 2007 Posts: 4,043 L.I. N.Y. S sqweeler OP Campfire Tracker OP sqweeler Campfire Tracker S Joined: Feb 2007 Posts: 4,043 L.I. N.Y. All fixed.New extractor and ejector.Flip's empties across the room.Thanks for the help.