Home Forums Hunting & Shooting Rimfires jc Higgins model 30

I picked up one of these a while back but it's missing the extractor, spring and pin. Trying to determine if numrich has the parts I need but it seems like there are two different extractor setups. Mine has the charging handle on the left if that matters. Can any of you help me figure out what I need?

Thanks.

Your best bet might be to ask over at Rimfire Central. Some of these had a single extractor, and some had a double extractor setup. Might be obvious by looking at the bolt closely, to see if it has cutouts for 2 extractors, or only one.

The single extractor is held in by spring pressure. The double extractor setup had the extractor held in by a pin (and thus, the replacement extractor has a hole in it).

My Model 30 (with genuine red nylon retractable sling in the stock!) that has the left handed bolt handle, has a single extractor setup.

Also, this link gives links to the manuals of different variants of the Model 29. Those manuals schematics MAY show which setup you have:

https://histandard.info/manuals/sears/rfrifles/index.html

Awesome. Thanks for the information fburgtx