Home Forums Hunting & Shooting Long Range Hunting Range Card

Here is a printed range drop that I laminated in packing tape, and just slide it under the ammo cuff.


Here I put riggers tape on the stock, and wrote the info with a sharpie. It looks upside down but that is so I can tilt the rifle and read it right side up.

If I need one, I will generally laminate it with clear Gorilla tape and then affix to the stock with the same. If I want more data, I save the JBM chart in my phone to have on standby.


Old pic, but same concept applies.

I made my own dope disk to fit inside the rear scope cap this year. On rifles with see-thru scope caps, I'm back to the tried and true card taped to the off-side of the action, so the butt never leaves your shoulder.

How are your yardage intervals laid out? I know that this is cartridge/species/weather specific.

Say a 150 grain 308 for whitetail? Thanks.

Print, laminate, punch a hole on the upper right corner and then zip tie to your furthest scope ring.

You can lay them out however you want, most use 50yds out to their maximum comfort range, other use 100yds and do the math for the distance between, I use 50yds to 500yds.

I use 50yd increments taped to the side of my stock.
Don't over complicate the [bleep].

Thanks guys.

Go simple like said above. Sharpie and Riggers tape just works. Good luck Sir

Shane, I see you're still humping an old pack frame for a PRC. Love it! Heading to WV to hunt with Heller next week.