Home Forums Hunting & Shooting Custom Rifles & Wildcats RIFLE BLUEPRINTS ONLY!

finally got a new pic up

High Plains Deer Rifle

Specs are:

Stiller Predator LA coated graphite black. Bolt and handle are titanum grey and the flutes were polished out and Campfire knob added.
1.5 lb Jewell.
Lilja SS #3 3 groove 10 twist fluted by Karl and crowned at 25".
Kampfeld lug.
Talley LW's coated titanium grey.
Bansner High Tech ADL, pillar bedded and painted in Lilth Charcoal Zolatone bt Karl.
7lbs as pictured.





X-VERMINATOR

Dang!

Wow! That is one good looking rifle!!

Beanfield/Sendero blueprint....




SS Rem 700
Lilja SS match factory Sendero contour (26") 10 twist chambered for 300 Ultra
McMillan Sako Varmint
1.5# Jewell trigger
Nightforce 20 MOA base
Nightforce Alloy rings (4oz.)
6.5x20x50 LRT Leupold

Also doubles as an effective coyote rifle (grin).....


X-VERMINATOR

Blaine
Can you tell me about the aluminum bedding bar on your 416 Remington?
thanks
rimshot

.350 Rem Mag

MRC 1999 SS action (drilled and tap to 8x40)
Lilja #4 1:12 SS 20" barrel
Williams Claw Extractor
Bolt Polished and Jewelled
NECG Banded Front Sight
Brockman Pop-up Peep
Leupold VX-III 1.75-6x32mm Post & Duplex with Talley QD Rings
McMillan EDGE Winchester Supergrade accurized by HCR
External metal Robar and internal metal NP3 coated

Weighs in at exactly 8 pounds with three 225gr. Nosler Partitions.

William,

Is it a 338 Federal or 358 Win?

Neither. It's a .350 Rem Mag

Forgot to add that originally, so it's now edited. Thanks for the heads up!

My two Remington 600 sisters.

Top:
Remington 600 7mm-08
21" Douglas air-gaged CM #1 Contour
McM EDGE in the Mountain Rifle pattern.
Timney Trigger w/ Williams ADL TG.
2950fps with Hornady 139gr Interbonds.
Weight is 6lbs/11oz as pictured with 4 rounds

Bottom:
Remington 600 338 Federal
21" Douglas CM #2 Contour
Richards Microfit in Old Classic #102 pattern.
Timney Trigger w/ Heritage Blued Steel TG.
2550fps with Hornady 200gr Interlocks.
Weight is 7lbs/8oz as pictured with 4 rounds.
I have a McSwirly ordered for it. Should be here in March.

The only thing left for me is to replace the factory shroud and firing pin on both the rifles.

RH

Himmelrr, my trilogy of terror is almost complete. Picked up my liteweight 257 Bob, and Mickey emailed me and my 223AI is almost done, those 2 will go with my 7-08 all built on 600 Mohawks and McM mountain rifle stocks.

Africa Battery





Top Rifle:

AHR Safari 550 DGR .458 Lott

AHR re-worked double square bridge CRF CZ-550 Magnum Action Integral dovetail scope mounts
Match grade 22" SS barrel using AHR contour
Glass bedded AHR AA Fancy English walnut stock
African Blackwood fore-end tip and grip cap, 2 cross bolts
NECG Banded Front & Classic Leaf Express Island Base Rear Sights
NECG Classic Barrel Band Swivel Stud
AHR 3-position safety
AHR Single Stage Trigger
Talley QD Rings
Leupold FX-II 2.5x20mm Heavy Duplex
All Metal GunKote

Fully loaded with five 500gr. TBBC Sledgehammers 11 lbs 7.1 oz

Bottom Rifle:

AHR Safari 550 DGR .375 H&H

AHR re-worked double square bridge CRF CZ-550 Magnum Action Integral dovetail scope mounts
Match grade 23" SS barrel using AHR contour
Glass bedded AHR AA Fancy English walnut stock
African Blackwood fore-end tip and grip cap, 2 cross bolts
NECG Banded Front & Classic Leaf Express Island Base Rear Sights
NECG Classic Barrel Band Swivel Stud
AHR 3-position safety
AHR Single Stage Trigger
Talley QD Rings
Leupold VX-III 1.75-6x32mm Post & Duplex
All Metal GunKote

Fully loaded with five 300gr. TBBC 10 lbs 10.9 oz





Chapuis Armes RGEX 9,3x74R DR

Double parallel lumps breeching design
Scalloped with sideplates and sculpted all steel action
Ejectors
Single Trigger
Hand-rubbed oil finish AAAA Fancy walnut
English-style bouquets and game scenes on both action faces as well as action bottom, case colored

Weighs 7 lbs 14.2 oz with two 286gr. Nosler Partitions

Welcome back to the real world. Nice trilogy! Mine will stay a pair for a little while. If my son gives up his 600 in 6mm, it may have to become a 257 Bob. I've looked long and hard for a 600 in 222 at a decent price to make it a 223 - so far no luck. I bought a cheap 700 ADL in 223 to paly with until I find one. All will be in McM MR stocks too! If only the 338RCM could fit into a 600 action, my 338WM may have to find a new home...

FOS, Awesome looking rifles. I especially like the double!

RH

My 12 yo son's 7mm-08

Remington 700 LSS 7mm-08
Laminated stock cut to 12 3/4 LOP with 1" Decelerator pad
Williams SS 1-pc BDL assembly
Timney trigger
Talley LW Rings
Leupold VX-III 2.5-8x36mm Duplex with Alumina flip caps
Metal inside and out coated with NP3

Tips the scale at exactly 8 pounds with four 140gr. Nosler Ballistic Tips

Here's my newest - just got her on the books with Patriot Arms Inc.

-Sako 75 V stainless action - .300 Win Mag

-Action and bolt trued and squared

-PAI precision ground recoil lug installed

-Broughton 5C barrel - 25" long, #5 contour, 1-10 twist

-Vais muzzle brake installed

-McMillan Sako 75 stock - GAP camo, 14" LOP, stainless sling stud pillars installed, Declerator Pad

-Pillar bedded and free floated

-Sako trigger tuned to a crisp 2.5#

-Sako bottom metal and magazine

-All metal coated in KG Gun-Kote in matte black

-Sako Opti-Lok bases and rings (with new case hardened screws)

-Will be topped w/ a Schmidt & Bender Zenith 1.5-6X42

Borden Alpine short action
Lilja #3- 9 twist
23" barrel
Williams BDL bottom metal
Jewell HVR trigger
Talley LW rings/ bases
Leupold 2.5-8 x 36 B & C reticle
Borden Rimrock pillar bedded stock
8 lbs 3 oz complete

MRC CM LH 358 Win. Action polished and squared
MRC CMR #4 22" barrel 1/12 twist, recessed crown
Matte blue finish
Trigger set at 2.5#
Serengeti Merlin laminated AA Claro stock w/ basic checkering
Ebony forend tip and crossbolt plugs
Metal grip cap
Decellerator pad
Glass bedded by Serengeti
Semi custom oil finish
Leupold VX III 2.5-8X, Leupold rings and base

Here are a couple that Karl just completed for me.
http://www.exoticguns.net/gallery/main.php?g2_itemId=23684
223 Ack Imp
243 Ack Imp
Both turned out great....thanks Karl!

Here is one that came back from Mickey Coleman about a month ago...
http://www.exoticguns.net/gallery/main.php?g2_itemId=23685
6.5-284
Great work Mickey.....thanks

Karl continues to put out unbelievable work.