Bought a bunch of targets from JC Vibby several years ago, back when it was more of a fund raising project for a youth group or something. They've morphed into a full blown company now with a slick website and everything.
https://jcsteeltargets.com/Just use them for rimfire and centerfire plinking on our club range. One particular 1/2" thick, 8" round plate has been in use since about 2012 or 2013 and absorbed well over a thousand hits at 200 yards from a .223 on up to a 270 WSM and it's still going strong. The rimfire targets will last forever.
With steel shooting so popular lots of folks make good AR500 targets these days. Still have a few that haven't been used but if I need a replacement there is a local company that makes them and I'll probably get some there just to save on shipping.
Same here, I've got a set of his NRL22 TGTs for my practice range. I made 4x4 stands for them, then added some of my 2/3rds AR550 IDPA silhouettes for "backstops" so we can see the misses on windy days:
![[Linked Image from i.imgur.com]](https://i.imgur.com/TthoKigl.jpg)
![[Linked Image from i.imgur.com]](https://i.imgur.com/ChzHzhgl.jpg)
All together I've got about 80 pieces of steel, predominately AR500 for the centerfires. I've also got one of these:
https://www.amazon.com/ShootingTarg...g-Plinking/dp/B07VLJJD6L?ref_=ast_sto_dpI've also got two sets of AR500 Bowling Pins (really for Centerfire) that we plink with .22s, they need "heads shots" to take them off the rails.
![[Linked Image from i.imgur.com]](https://i.imgur.com/2GH9Ltll.jpg)
Last, but not least I've got a set of these:
https://www.qualitytargets.com/animal-silhouette-target-targets-10-pcs-1-4-steel/That I use these stands for:
![[Linked Image from i.imgur.com]](https://i.imgur.com/UGUko7Al.jpg)
My latest acquisition for the "big guns" 540 yds off the back deck:
![[Linked Image from i.imgur.com]](https://i.imgur.com/aWWFZRtl.jpg)