24hourcampfire.com
24hourcampfire.com
Previous Thread
Next Thread
Print Thread
Hop To
Page 2 of 4 1 2 3 4
Joined: Jul 2001
Posts: 59,910
M
Campfire Kahuna
Offline
Campfire Kahuna
M
Joined: Jul 2001
Posts: 59,910
Me too--partly because I have used JB Weld for bedding and it works about as well as any other epoxy-with-filler.


“Montana seems to me to be what a small boy would think Texas is like from hearing Texans.”
John Steinbeck
BP-B2

Joined: Sep 2007
Posts: 26,524
RWE Offline
Campfire Ranger
Offline
Campfire Ranger
Joined: Sep 2007
Posts: 26,524
dude, bolts on the wrong fuggin side.

Mirror image all my prior instructions...

Joined: Apr 2004
Posts: 61,130
V
Campfire Kahuna
OP Offline
Campfire Kahuna
V
Joined: Apr 2004
Posts: 61,130
Dave;

The tape trick, btw, works like gang-busters.

Thanks, and we'll see in a few hours what it looks like.




Joined: Nov 2005
Posts: 22,734
B
Campfire Ranger
Offline
Campfire Ranger
B
Joined: Nov 2005
Posts: 22,734
Is the tape going around the barrel designed to keep the barrel a little higher in the channel?


My home is the "sanctuary residence" for my firearms.
Joined: Apr 2004
Posts: 61,130
V
Campfire Kahuna
OP Offline
Campfire Kahuna
V
Joined: Apr 2004
Posts: 61,130
Originally Posted by bigwhoop
Is the tape going around the barrel designed to keep the barrel a little higher in the channel?


A little higher, and centered.




IC B2

Joined: Jan 2005
Posts: 10,266
WGM Offline
Campfire Outfitter
Offline
Campfire Outfitter
Joined: Jan 2005
Posts: 10,266
The "tape trick" is damn near a MUST-DO for any bedding job as far as I'm concerned ... it only helps, and never hurts, to make sure that the barrel is centered in the channel, and is set at a proper height should it need any lift before bedding.

Even if doing a full-length-neutral-bedding job on the barrel, you can always just tape the barrel at the very end of the bbl channel of the stock for laying down "phase 1" of the barrel bedding ... and then it's up to you to leave that space there, or fill it in later with more bedding material.

again, there are NO drawbacks to the 'tape trick' ... just make sure you put the correct thickness of tape around the barrel so that the action sits properly in the stock when bedding... too much tape will result in an upward angle of the bbl'd action in the stock - but it's very easy to avoid that when setting it up.


-WGM-
Joined: Apr 2004
Posts: 61,130
V
Campfire Kahuna
OP Offline
Campfire Kahuna
V
Joined: Apr 2004
Posts: 61,130
Yep.





Joined: Aug 2002
Posts: 7,445
FVA Offline
Campfire Tracker
Offline
Campfire Tracker
Joined: Aug 2002
Posts: 7,445
Originally Posted by Mule Deer
Me too--partly because I have used JB Weld for bedding and it works about as well as any other epoxy-with-filler.


Same experience here.


Joined: Apr 2004
Posts: 61,130
V
Campfire Kahuna
OP Offline
Campfire Kahuna
V
Joined: Apr 2004
Posts: 61,130
Needed more J-B weld.....

I went skimpy on the schit, but otherwise, it looks fine.

Scraping and reapplication in process....




Joined: Sep 2004
Posts: 35,293
N
Campfire 'Bwana
Offline
Campfire 'Bwana
N
Joined: Sep 2004
Posts: 35,293
I feel like a kid at krissmuss waiting for this thing to be unwrapped grin



Something clever here.

IC B3

Joined: Apr 2004
Posts: 61,130
V
Campfire Kahuna
OP Offline
Campfire Kahuna
V
Joined: Apr 2004
Posts: 61,130
raffin'........

Actually, 6 hours is not QUITE enough time for J-B to set up to "working" hardness. Firm, in place, but still too soft for "working". 8ish, is likely mo' betta.

Went skimpy on the first run. Easy fix; just scar it up with the razor knife, make it "messy" (technical term), and regoop ('nother technical term). Much better "goo-age" ('nother 'nother technical term) on the reapply.

So, we wait some more.

A.m. unwrapping, at this point.

BTW - Johnson's Paste Wax and a topcoat of One Shot works JUST fine for a release agent.




Joined: Sep 2004
Posts: 35,293
N
Campfire 'Bwana
Offline
Campfire 'Bwana
N
Joined: Sep 2004
Posts: 35,293
Cool, I'll check back, same bat channel in the mornin.



Something clever here.

Joined: Jan 2005
Posts: 10,266
WGM Offline
Campfire Outfitter
Offline
Campfire Outfitter
Joined: Jan 2005
Posts: 10,266
I'm banking on the morning reveal being "strike two" ... (grin)


-WGM-
Joined: Apr 2004
Posts: 61,130
V
Campfire Kahuna
OP Offline
Campfire Kahuna
V
Joined: Apr 2004
Posts: 61,130
Originally Posted by WGM
I'm banking on the morning reveal being "strike two" ... (grin)


Wanna place a bet? Considering what the first look showed, J-B don't act no different than any other steel reinforced epoxy; just slower setting and less expensive. I skimped on the goo on the first shot, otherwise, she'd be sterling.




Joined: Mar 2006
Posts: 573
Campfire Regular
Offline
Campfire Regular
Joined: Mar 2006
Posts: 573
I have bedded several rimfire and centerfire rifle with JB Weld and Johnson's Paste Wax as the release agent. Blue tape used exactly the same as posted here. Works perfect. Never a problem.

What's not to like for $5.00 and enough for 2 to 4 rifles?

Joined: Jun 2007
Posts: 21,914
H
Campfire Ranger
Offline
Campfire Ranger
H
Joined: Jun 2007
Posts: 21,914
Those little Interarms shoot silly when floated, least in .224.

I smell a 22 or 6PPC fast twist tube on that sucker.....

Joined: Apr 2004
Posts: 61,130
V
Campfire Kahuna
OP Offline
Campfire Kahuna
V
Joined: Apr 2004
Posts: 61,130
Originally Posted by HawkI
Those little Interarms shoot silly when floated, least in .224.

I smell a 22 or 6PPC fast twist tube on that sucker.....


Nope. I'm diggin' the idea of 7.62 Russian. Though, if she SUCKs (which, it don't, BTW), a 6PPC was the idea.




Joined: Jun 2007
Posts: 21,914
H
Campfire Ranger
Offline
Campfire Ranger
H
Joined: Jun 2007
Posts: 21,914
Dig all three; gauges, vise, and wrench. Just like a Sako, in that regard.

You need borrow vise and wrench, look me up.....


Doesn't look like you need a chisel (grins).

Joined: Aug 2010
Posts: 47,727
B
Campfire 'Bwana
Offline
Campfire 'Bwana
B
Joined: Aug 2010
Posts: 47,727
Hey, I bet jb would work pretty good for a synthetic stock. Have any of you guys tried it on a ruger hawkeye all weather stock? I'm is suspense VAnimrod. Looks like you shouldn't have any problems though. Thanks for posting this. BSA.


Originally Posted by raybass
I try to stick with the basics, they do so well. Nothing fancy mind you, just plain jane will get it done with style.
Originally Posted by Pharmseller
You want to see an animal drop right now? Shoot him in the ear hole.

BSA MAGA
Joined: Mar 2006
Posts: 14,435
Campfire Outfitter
Offline
Campfire Outfitter
Joined: Mar 2006
Posts: 14,435
I used JB Weld to bed my .25-06. She shoots top-notch now!

A couple of things I've found:

- Working hardness is acheived in about 8 hours
- Kiwi neutral shoe polish works great as a release agent
- Full cure after 24 hours means a good, hard steel-reinforced epoxy bed
- Much less viscous than Devcon and easier to use. I use both, and either one works great
- Did the bedding job about 1.5 years ago, and the epoxy is holding up fantastic

Can't wait to see the finished product!

Page 2 of 4 1 2 3 4

Moderated by  RickBin 

Link Copied to Clipboard
YB23

Who's Online Now
163 members (12344mag, 160user, 257 mag, 10Glocks, 2UP, 300_savage, 16 invisible), 1,852 guests, and 845 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums81
Topics1,187,728
Posts18,400,783
Members73,822
Most Online11,491
Jul 7th, 2023


 







Fish & Game Departments | Solunar Tables | Mission Statement | Privacy Policy | Contact Us | DMCA
Hunting | Fishing | Camping | Backpacking | Reloading | Campfire Forums | Gear Shop
Copyright © 2000-2024 24hourcampfire.com, Inc. All Rights Reserved.
Powered by UBB.threads™ PHP Forum Software 7.7.5
(Release build 20201027)
Responsive Width:

PHP: 7.3.33 Page Time: 0.112s Queries: 15 (0.003s) Memory: 0.8945 MB (Peak: 1.0437 MB) Data Comp: Zlib Server Time: 2024-03-29 10:11:03 UTC
Valid HTML 5 and Valid CSS