Home Forums Gear Free Classifieds WTS: 7mm Rem Mag dies, 7mm Bullets, .223 X-sizer die

Just got rid of my 7mm RM. I have:

Lee RGB die set in good condition (surface rust on outside of sizer)

Redding Neck Die (not bushing) in great condition

73 154 gr Hornady SST with about 25% of them previously loaded and pulled

65 150 gr Swift Scirocco II - 48 are new, 14 were previously loaded and pulled, and 3 were loaded and pulled but show some significant deformation, however they are still usable. I have put these three in a little baggie to keep them separate.

I also have for the 7mm Rem Mag:

41 - 1x fired Rem brass

98 - 2x fired Federal HS brass (same lot). Of these, 75 are neck sized and primed. 23 are fired and tumbled.

50 - 1x fired Winchester HS brass. 40 of these have been neck sized and primed. 10 still have to be tumbled and re-sized. There is sharpie markings on the primer of and head of 20 of these cases for load developement purposes, but this should come off in the tumbler.

Also have 10 Win Nickle Plated Cases that I pulled the 150 NBT from.

All primed cases are CCI 250 primers.

Pretty eclectic, I know.

$100 for everything TYD.

Also have a brand new in RCBS .223 X Sizer die. Never been used. $30 TYD.

First to PM me gets it.

Shipping to CONUS only.

If you decide to split I would be interested in the SS II

I will take the .223 RCBS X die.

pm inbound.

pm sent regarding Winchester brass (if you decide to split this up)

X die SPF

TTT

Trying not to split the 7mm stuff up. If I do, the Win/Rem brass and Sirocco IIs are spoken for.

Would prefer to ship it all at once, as I have a new little baby and not a lot of time.

Thanks for looking!

Bump

Bump