Anybody tried the above combination? Just acquired a couple of boxes and could use a starting point. Hoping for 3100fps +.

Thanks for your replies in advance!

Elk Country

69.0grs of Reloader 26 with a 150gr Nosler Ballistic Tip,Remington case is my go to load.Went up to 70.0grs with no issues,so this may get you close.





The 160gr Accubond load was 3084fps with 67.5grs

Bald hunter,

Thanks! That will get me started!

Keep them coming!

I have 150BTs, Partitions and TTSX bullets to try!

Elk Country

I have similar results with 150 eldx and 150 TTSX with 69 gr of RL26.
67.5 gr with 162 Eldx and 160 partitions.

67.5 RL26 with 150 Scirocco 3244fps and very accurate. Fed 215 primer

A number of powders will get you to 3100 including 7828 and RL22

That's wicked. What's your COAL?

3.29"

I need to try some Reloader 22 for mine. I have four, been loading 64 grains of IMR 4350 with a 140 partition or ballistic tip for 40 years. The Reloader 22 does real fine in a 270 Weatherby with a 140 Accubond. It is really hard for me to try something new, when an old standby works so well.

Not 150 gr but 180 Gr ELD X 24" LH Ruger MK 2 7 MM Rem Mag

CCI 250 RP 3 @ .56" at 200 yards 67 GR RL 26 180 GR Horn ELD 2938 FPS 67.5 2946 FPS 68 3005 FPS