Anyone know what these bolts fit, the body are 5/8” wide & got a Mauser type extractor and a bolt shroud and the safety & only one locking lug in the back & none in the front, they got a grove cut into the left side of the body, it must be for a pistol case a 223 won’t fit into the face & extractor any help on it
Destroyer Carbine maybe? Just a WAG. Good luck
Yea that’s what we thought too, tried it in one close but no go I bought them with that in mind. Hopefully someone someone been looking for these whatever they are for years & we can get it back shooting again for a few bucks. what the kicker is no front lugs & just one back one,
What's the bold face look like. Could they be for the .22 training rifle?
What's the bold face look like. Could they be for the .22 training rifle?
Did you look up the rifle on Gunboards forum? Is the rim of a Largo the same size as the 9mm Luger? Somewhere I have read something about a Largo that is hard to find that is a 9mm Luger. Are you saying that the bolt face is not a match to the Largo rim?
Years ago, I knew a guy that had one that he shot nad I think he just called it a 9mm Luger rifle converted from an original Largo.
Well anyway, I tried. Good luck with your project.
Ken
Wikipedia says they were made to shoot rounds such as the 38 or 9mm Luger.in the later years and are highly desirable,
This bolt wouldn’t fit into a destroyer action , this just looks like a small scale 98 Mauser bolt without the front lugs, it is a center fire & has a claw extractor, & has a left to right flip up safety like the Mauser does surly it doesn’t use the bolt handle & the back single lug, or maybe the grove in the side of the bolt to lock it , I’ll send some pictures of it. Thanks guys