This service was originally offered simply as a way to dress up a plain black plastic synthetic. In the interim I've painted some very expensive stocks. Some involved quite a bit of work.

New guidelines: due to the increase in shipping cost and paint supplies - for a plain plastic stock I charge $60 which includes return shipping. This is for the lower 48.

If the stock is a Bell and Carlson, H&S, or other higher priced stocks the charge will be adjusted to reflect the increased insurance cost. Typically $3.85 covers up to $300 in insurance. $6.75 covers up to $500.
I'd you want the old finish completely removed the base fee is $20 That covers most of the jobs I see. If it's a target stock with moving and or removable parts add $10

Please pull sling studs and recoil pads if possible. I've seen a few recoil pads glued on.

I use a good chip resistant paint that has a seven day full cure time.
Chip resistant..... Not chip proof.
I use clear coat also.

Single order: $60
Multiple orders:
Two stocks $105
Three stocks $150

Up to two spider web colors: no extra charge.
Speckle / spatter paint add $5
Texture finish: add $5

All prices include return shipping and basic insurance.

If anyone wants to share some feedback, good or bad, on their stocks please post it here. Feel free to share pictures. I've had good feedback from folks here and I appreciate that very much.
I've only had one failure of the paint. It was on a Hogue camo dipped stock. It would hold paint at all. I fully refunded the members money.
I painted a plain black Hogue stock for a member and haven't ever heard back.

You have any other examples of sponge applications? I have a carbon fiber AG where a little color is good but want the CF to still show.

Just getting started with the sponge painting. Options are endless. Three sponge colors on this one. Two on the stock in the earlier picture.

Tri colors....

Did mine ...super happy with it.

Bump

Thanks for posting CJC73

Tag

John Boy gave my stock a sweet paint job. Smooth transaction and quick turnaround time. Thanks!

Pm sent

He painted one for me and I was super pleased with the job and his way he conducted business..

Thank you Pecjtc.....

tag

very nice work OP!

Thanks Jim

Before!



During!



After! Need better pics outside!

Hello, are you able to put that texture on the stock like a B&C has from factory or only webbing?

My texture is a bit finer grit than B&C.
It's only added if the buyer wants it.
It's a small added cost.

Really like that grey with the black &red spider webbing! If I get this rifle off gunbroker, I'll get with Cuz.

To the Top! Incoming PM

tag

A skull & crossbones would be better than a star.

True, but the flag of the Republic has a Lone Star for a reason….
Not the flag of Chile…..

Remington paint job by John_Boy. Nice work.

Thank you 308.

Trying some different patterns with different nozzles. Paint density is a bugger. Flat paints don’t do as well as glossy.

Tag

Newest webbing. Light green.

A new addition. If you send me a plain hollow butt synthetic stock I'll add foam sound deadening. An extra $5

One for my son in law…..
I was deathly ill the whole time I was painting it …🤮

Ever painted Nula like stripes?

Something like this?

Like this.

I could possibly do that. Not identically, but close.

Here's another.. Just the stripe pattern, not necessarily the colors.

The hardest part would be to correctly roll over the color to the other side.

Bump

Bump

TAG

Fajen for a Ruger 10/22

Bump

Have you painted any Kimber Hunter Stocks?

Yes. Kimber, H&S and many others.

Sent you a pm with a picture of what I'd like.
Thanks
Jim

Bump

Bump

Bump