Heading to bear hunt in Montana in May. Would like to put some heavy loads together for my 30-06. Don’t need a bunch as it will not be my primary load.
I just worked up a load of 180’s Partitions at 2950 fps in my 24” 30-06 with RL26 - in case you can’t find 200gr. QL says this is at 61kpsi. No signs of pressure. Over 3000 ft-lbs at 100 yds.
I just worked up a load of 180’s Partitions at 2950 fps in my 24” 30-06 with RL26 - in case you can’t find 200gr. QL says this is at 61kpsi. No signs of pressure. Over 3000 ft-lbs at 100 yds.
That’s pretty hot! Bad news is I can’t find them either.