Home
Does anyone have a scope mount for a 99c. One piece most likely. I have a two piece set but they are uncomfortably high. Thanks
Posted By: hanco Re: WTB- savage 99C scope mount - 06/27/22
I use Weaver number 14 and 19 with Burris signature Zee rings. Would that work? Looking for a pic



[Linked Image from i.postimg.cc]
Very nice guns. I sure think they would work.
Posted By: hanco Re: WTB- savage 99C scope mount - 06/27/22
[Linked Image from i.postimg.cc]acer aspire hardware test
Tasco used to sell 2 different one-piece bases for the Savage 99 that allowed for the use of Weaver-style rings.

The BM-99 is a steel base that has a nicely polished blued finish.

The 841 is an alloy base that has a matte dark gray, not quite black, finish.

The BM-99 base is aesthetically more pleasing, more in sync with a blued and walnut rifles, and is (IMO) the best looking base for use with Weaver-style rings on a 99.

These Tasco bases sit a little lower than any other bases that I've installed on a Savage 99. They show up on eBay from time to time.
Originally Posted by 260Remguy
Tasco used to sell 2 different one-piece bases for the Savage 99 that allowed for the use of Weaver-style rings.

The BM-99 is a steel base that has a nicely polished blued finish.

The 841 is an alloy base that has a matte dark gray, not quite black, finish.

The BM-99 base is aesthetically more pleasing, more in sync with a blued and walnut rifles, and is (IMO) the best looking base for use with Weaver-style rings on a 99.

These Tasco bases sit a little lower than any other bases that I've installed on a Savage 99. They show up on eBay from time to time.

I received a message from someone who saw a Tasco 841 base on eBay with a label indicating that the 841 base fit Savage 110 series rifles. This person accused me of putting out incorrect information. So, I bought the 841 bases that he wrote to me about to see if they had been mismarked or it Tasco had changed their model numbering protocol. The packages do indicate that they are for Savage 110, CIL 950, and Revelation 250 rifles, but the bases are exactly the same as the 841s that I have installed on a dozen or so 99s that were factory d&t. Over the years, Tasco changed the packaging for the 841 bases from blue, to yellow, and then to gray and red. All of the 841s that I've seen in the blue packaging have indicated that they were for the Savage 99, 1895. CIL 900, and Anschutz 153.

I don't know how many of these mismarked Tasco bases are out there, but I just got 2 of them off the market.

PS The blue packaged Tasco bases that I have are base and ring sets, while the yellow packaged Tascos are only the base.
You should post for a 99R 1 pc scope mount ( I think it was made by Redfield. Some of the 99 guys should have one. I have one on my 99C.

It is stamped 99R on the side.

There is a 99 savage 1pc Buehler base on ebay now (starting bid $29) also there are Buehler rings for sale on Ebay also. You would be really low
with this combination.
Posted By: Sams44 Re: WTB- savage 99C scope mount - 07/04/22
I have a Leopold one piece base with rings, $25 plus shipping
© 24hourcampfire