WTS McMillan, Manners, Bansner stocks - 11/01/22
All for Remington 700. All right hand hand stocks. All standard LOP as they came from the factory. 3 are brand new, one is barely used.
Top to bottom:
McMillan Hunters Edge (Redhawk Rifles)
Olive with black fleck tone, Rem 700, LA, bedded (I think in Marinetex) for Rem 700 LA, 27.5 oz with 1" decelerator, BDL inlet (was using PTG BDL bottom metal) Magnum sporter contour, very light use, never hunted with. 3 studs but only two are screwed in here. Bought this from Redhawk Rifles. An LA 700 "should" just drop in.
$500 shipped
Manners EH2
For 700 Short Action, BDL inlet. Brand new, never bedded, Proof barrel contour. 28 oz with 1" decelerator. This is my favorite Remington inlet stock...I just don't have a use for this particular one. I can't remember the paint color but it's naked carbon with the sponge paint job they do. You can't really see the carbon in these pics but it's very clearly naked carbon. Maybe GAP paint job? I truly cannot remember but you can find on the Manners website. Two sling studs.
$550 shipped.
Bansner Sheep hunters. 21.5 oz each. Brand new, these are as they come from Bansner, not bedded, not cut. 3 sling studs on both. In my experience these finish around 23 ounces bedded if you use a 1" microcell pad (Cervatelli, from Hastings distribution). If you can operate a table or chop saw you can cut them to your LOP and if you can operate Marinetex (as per Bansner they use Loctite 416) you can put a pad on. Appears to be a #3 or Magnum Sporter barrel channel. Barrel channel at termination of fore-end measures 0.810.
These are approximations and will change based on shank length but a short shank Brux #3 measures .76 at that point and a Rem Mag sporter measures .740 at that point.
Rem 700 SA $375 shipped
Rem 700 LA $375 shipped
No offers, just post I'll take it. Thanks much.
Top to bottom:
McMillan Hunters Edge (Redhawk Rifles)
Olive with black fleck tone, Rem 700, LA, bedded (I think in Marinetex) for Rem 700 LA, 27.5 oz with 1" decelerator, BDL inlet (was using PTG BDL bottom metal) Magnum sporter contour, very light use, never hunted with. 3 studs but only two are screwed in here. Bought this from Redhawk Rifles. An LA 700 "should" just drop in.
$500 shipped
Manners EH2
For 700 Short Action, BDL inlet. Brand new, never bedded, Proof barrel contour. 28 oz with 1" decelerator. This is my favorite Remington inlet stock...I just don't have a use for this particular one. I can't remember the paint color but it's naked carbon with the sponge paint job they do. You can't really see the carbon in these pics but it's very clearly naked carbon. Maybe GAP paint job? I truly cannot remember but you can find on the Manners website. Two sling studs.
$550 shipped.
Bansner Sheep hunters. 21.5 oz each. Brand new, these are as they come from Bansner, not bedded, not cut. 3 sling studs on both. In my experience these finish around 23 ounces bedded if you use a 1" microcell pad (Cervatelli, from Hastings distribution). If you can operate a table or chop saw you can cut them to your LOP and if you can operate Marinetex (as per Bansner they use Loctite 416) you can put a pad on. Appears to be a #3 or Magnum Sporter barrel channel. Barrel channel at termination of fore-end measures 0.810.
These are approximations and will change based on shank length but a short shank Brux #3 measures .76 at that point and a Rem Mag sporter measures .740 at that point.
Rem 700 SA $375 shipped
Rem 700 LA $375 shipped
No offers, just post I'll take it. Thanks much.