Home
Thought this was sold but buyer backed out. So back up it goes.

I have bought and sold here for years with no issues. I prefer a check I wait till clears, usually 2 or 3 days, but will take also take zelle.

I will also need an FFL or will sell FTF in Houston TX area. FFL must accept from an individual with a copy of my DL and receipt.

This started as a 257 Weatherby Vanguard First Light edition. 26" fluted light #2 contour barrel with removable break and thread cover, I have the cover on it now. It is cerakoted a vaery nice coyote color.

I added a Timney trigger, it has the 3-position safety.

I then fully bedded it, action and bottom metal into a Mcmillan Mcswirley camo standard fill Mcm Hunter Stock.

It is a great gun, LOVES 100 TTSX, 80 TTSX, 85 Ballistic tips, 110 Accubonds and 110 Interbonds. You can get any of those to shoot sub MOA in this gun. the 100 TTSXs and 110 Accubonds were .6" 3 shot groups. I shot a sub 4 inch 600 yd yard with the gun. 10 X scope off a pack prone.

It didn't like some 75 grainers I tried.

About 250 down the bore.

I have TONS of ammo, bullets, dies and brass I will offer to the buyer of the rifle first, so until it sells don't ask.

Gun is like new and weighs 6 lbs 15.8 oz naked.

The base first light rifle in the plastic stock is 950 ish real-world price, the timney 150 ish and the MCM 600 ish these days.

Asking $1200 shipped.

I have more pics I can email or text.

Attached picture IMG_2491.jpeg
Attached picture IMG_2494.jpeg
Good buy here , on my favorite caliber
TTT you ever run those 80 and 100 grain ttsx over a crony.
That’s a good looking setup.
Originally Posted by howard1
TTT you ever run those 80 and 100 grain ttsx over a crony.

Yes. Using 7828 ssc avg 3780 for the 80s and 3476 on the 100s. Was still under max on both by a .5 grains


Spence
Btt
ttt
Ttt
Btt
Does that stock have a palm swell and is that the factory finish on the metal?
Factory Wby cerakote finish and a slight RH palm swell, not a big one. Spence
Btt
I bought one of these about a month ago. Mine is all factory specs. With a timney trigger and Mcm stock this would be a great gun.
Btt
Great round. I have a MKV weathermark LT. Shoots beer bottle caps at 300 yards with factory Weatherby Select ammo 110 accubonds. My go-to for west Texas whitetail and mules.
btt
BTT
Btt
How much ammo,brass and dies do you have? And how much do you want if you get the 1200 you're asking?
PM Sent
btt
Btt
btt
btt
btt
Sold.
© 24hourcampfire