I Prefer bolt guns, but I’ll take an AR too. Mainly targeting coyotes with an occasional bobcat

Let me know what you have, PM or text
570.4six0.97five7

Tag.

Ttt

CZ 527 .223 rem...?

Remington 700 Sendero SF 22.250 ???

Text sent 6 Creedmoor

Custom REM 700 223 Ackley improved, unfired!

If my wallet wasn't in the dumpster, I'd have bought that one a long time ago!

Burleyboy has a Howa Mini 6.5 Grendel for sale. It's a yote killing cartridge!

I have a custom rem 700
Rem 700 BDL action (black matte finish)
Shilen stainless (matte stainless finish) 25” #3 contour barrel
Chambered in 223
1:12” twist
Fluted bolt
Custom bolt knob
Gray/ black laminated stock with checkering, cheek piece, sling studs, black forend tip, grip cap, and recoil pad
Stock is glass bedded
Includes scope base/rings

I had this gun built, broke in the barrel and put it away. I have no time to shoot it and have too many guns. It has fired far less than 100 rounds. The guns condition is close to 100%.
PM me if you want pics.

$1199 uspsmo shipped to conusa ffl

Thanks

my 223 is listed. fast twist can shoot the 90s.

https://www.24hourcampfire.com/ubbt...out-223-rem-barreled-action#Post19204119

I built a .22 Magnum AR on a PSA lower and a Bear Creek 20” SS upper for $400. Both were on sale, but those sales are frequent. Good calling rifle I think.

Also, not sure where you are in Eastern PA, but I have a recently liberated Howa Mini 6.5 Grendel barreled action that’s for sale locally at a good price, and you may be close enough to me in the Eastern Panhandle of WV to do a face to face at a dealer somewhere convenient for both of us. PM me if interested.

https://www.bearcreekarsenal.com/22...length-gas-system-15-mlok-sch-upper.html

This upper??? How’s it shoot? This would be great for targeting Fox and bobcat

I have a savage bmag 17 wsm I'll sell comes with 100 rounds of ammo $375.

I have an unfired CZ 527 Varmint in 6.5 Grendel.

Messages sent

Hoping to find one with a relatively short, threaded, barrel

About like this. This is from when I sighted in the Elite 4500 1-4. Since then, I’ve only popped some 100 yard steel with the 30gr Vmax. I like that it puts various loads pretty much in the same place at 50. I stocked up on the Fed 50s and 30gr Hornady.


Two shots lower center were the first fired. Adjusted to the center dot, then again for the 3-shots upper right.

Read the requirements for the lower on the BC site. Those RFs need a good hard whack, so no fancy triggers. I used a PSA MOE lower with enhanced (polished) trigger.

Ttt