I have the following rifle for sale.

It started off life as a DPMS Sweet 16 Upper / Rock River Arms Lower. The Sweet 16 has a heavy contour 16" barrel in stainless. The upper is a flat top.

Then:

LMT two-stage trigger
KNS anti-rotate pin kit
Fixed A2 stock
Noveske low-profile gas block
RRA Winter Trigger Guard
Ergo grip
Midwest Industries FF for Full Length Rifle
LaRue Troy front and rear BUIS
LaRue SPR scope mount
Barrel threaded 1/2x28 w/ thread protector

This rifle has ten rounds through it by me and shows good accuracy potential. It had approximately two hundred rounds through it prior to the build.

I'll take $1350 shipped to your FFL for the above package.

I also have a Leupold Mark 4 3-9x36 w/ M1 knobs. Included are screw on scope covers (not flip ups).

I'll take $750 shipped for the scope.

I'll ship the whole package for $1950.

The whole package is currently at the 'smiths getting the threading finished. As such, I don't/won't have pics for a few more days.

I'd also separate the upper/lower.

BTT.

Lower is SPF.

I'll sell the upper for $850 shipped (minus the Larue mount).

Scope is $725 shipped or $800 with the Larue.

Larue by itself is $100 shipped.

Pics by tomorrow night.

PM sent

If available I will take the LaRue scope mount (ifin 1"). .

Let me know.

Thanks.

An update:

The Larue is SPF.

I still have the upper and scope and will post pics later this PM.

Thanks.

Nice score Karnis.

Who won da Larue?

Alright. . .I'm changing this up a bit. I've parted out the upper. As such, below is a list of items and prices.

Thanks!



DPMS upper w/

- Noveske port cover
- Badger Tac Latch
- DPMS Bolt Carrier Group

$350 shipped.




DPMS Free Float Forend

This came off of a DPMS Sweet 16 upper. It has two small marks on the metal as shown in the pics. This FF tube replaces the barrel nut.

$40 shipped.



Midwest Industries FF Rifle Length Rail Forend

This is in excellent condition, as it was only mounted for a few days. It has not been fielded.

$195 shipped.



LaRue / Troy Flip-Up sights.

These are in excellent condition as well.

$105 shipped each or $200 shipped for both.



DPMS 16" Stainless Barrel in .223 Remington.

This barrel is a 9" twist with a muzzle measurement of .920". It has approximately three hundred rounds through it and displayed average to above average accuracy.

The barrel's muzzle was threaded 1/2x28 to accomodate a suppressor. A thread protector and a modified barrel nut (to fit the larger contour barrel) are both included.

Included is a Noveske Low Profile gas block and the gas tube.

$200 shipped.

[img]http://i4.photobucket.com/albums/y136/duckdog310/DSC00318.jpg[/img]

DPMS Gas Block w/ Picatinny Rail

Used in great shape. .936" inner diameter. I think Koelbl makes these for DPMS.

$35 shipped.


This scope is in excellent condition with no ring marks, lens damage, or other defects. It is the 30mm main tube with a mil-dot reticle.

The scope includes screw-in objective covers from Leupold.

$750 shipped

[img]http://i4.photobucket.com/albums/y136/duckdog310/DSC00304.jpg[/img]

[img]http://i4.photobucket.com/albums/y136/duckdog310/DSC00306.jpg[/img]

FYI. . . the smudge under the knobs is a fingerprint. I doublechecked and confirmed NO defects! [img:'middle']http://www.ar15.com/images/smilies/icon_smile_big.gif[/img]

And the Larue went to a fella on another site!