just a thought...

but I was wondering the interest and feasibility of a take off barrel swap on the forum here..

I have a couple of barrels that I will probably not use, but doing a barrel swap with someone, would potentially be a lot cheaper than selling the firearm and purchasing another.. plus a lot less paperwork and paper trail, to catch the attention of our Federal Gun Grabbers...

So at the moment, I'll start out with having a 22 inch Rem ADL barrel chambered in 243, with a couple of hundred rounds down the barrel and that is it..

would be interested in another Rem barrel or potentially a Savage or Stevens take off barrel...

thought I'd start here and see how this goes.. have other barrels I'll never use..

thanks for looking..
cheers
seafire

I have several also...will have to prepare a list and post here. Good Idea!
Jerry/AK

I'm looking for a 25 cal. for a Savage switch barrel I want to do.
and have a nice Lilja SS 26" chambered for 25/284 that I considered using but change my mind.
So, if interested in my Lilja let me know what you have in a 25 cal. at least 26".
My Savage has a fluted 26" SS 9 twist factory barrel finished at .730 muzzle diam., and I would like to stay at that profile, but can turn if I need to.
I also want to get a bolt for the Savage long action, prefer with .473 face.
George

Seafire,

Top notch idea here, old boy!

I'll put together a list of barrels for which I have no immediate use, and a wish list of barrels that I only dream about mounting.

All aboard!!!

Wayne

I have a new unfired stainless take off Ti barrel in 30-06 that I'd like to trade for the same in 270 Win.

I would also trade for the same from a stainless Mountain Rifle. (I "think" they're basically the same barrel?)

Sorry, I'm not interested in selling, as I'll build it as a 30-06 if I can't find a 270 barrel.

Thanks!

Got a 300WSM SS take-off from a M700. Looking for a SS .280 Rem bbl - M70 or M700.

I have a couple, Douglas in 280 for a LR Mauser, and a Model70 pushfeed in 270 feathweight. Would like a 7-08 or 308 for the Winchester. 7X57 or a decent 8x57 for the Mauser military OK if VG bore.

I have a stainless 20in 260 off a seven that I would trade for a 22in stainless 280 mtn barrel for a 700

Bump, to the top...

I have a Savage in 300 WSM (large shank), not looking for anything particular. I do have several LR mausers that are barrelless. I don't need any 30 cal or 270 cal barrels.
A 338 blank or a 338-06 for a Savage would be nice!
I can turn the 300 WSM barrel for a small shank for the right deal.

smithrjd you have a PM

Thanks, James

PM 2 U

PM answered.

Ron

LH Win 70 06 Blue nice , Rem 700 270 Blue very accurate lo rd count, Rem 700 7 Mag Blue, Looking for a LW 25 caliber, or
a 280 barrel.

I have an unfired take-off matte rem 700 barrel in .270 and/or a 338-06 pac-nor tube with flutes threaded for a CZ action. Would like to have a LR mauser sporter barrel (open to chambering) or a 700 mtn rifle contour barrel in 25-06...

This will be a long shot, but I have a 24 inch sporter contour stainless 300 SAUM takeoff with about 30 rounds down the tube. I would like to trade for a stainless Mt. Rifle contour takeoff in .243 Win. I am also willing to just sell the barrel outright, so PM me if you are interested.

Bump to keep a good post going. I have some 8mm Mauser barrels with good bores if anyone needs one you can have them for shipping cost. I also have a 7mm rem mag take off for shipping cost.


James

Still available, A couple of good deals and freindships have already happened because of this post.

James

Super long shot here, but I have a mint Sako .300WM barrel, I would like to trade for a .338WM barrel.

Thanks.

R.

if i could ride the coat tails on this one, i don't have one for trade, but i'm looking for a Ruger SS 7-08 factory sporter barrel off a all weather to purchase.

I have Rem LVSF take-off in 204 ruger .Less than 200 rds. down tube. Looking to trade for a LVSF take-off in 243 or 7-08. Would also consider a Rem VTR take off in any cartridge except 308.Let me know what you have via pm.

Brute

I have a heavy barrel for a Remington 700 chambered in .250 Savage. It's 24", the bluing is not great and the bore isn't the smoothest you've seen but it shoots! Here's a pic of the barrel while still on a SA Remington and a pic of a 100 yd target shot with 75 gr Sierra HP's and 4895 with no particular load workup. Open to trades or sale. Let me know what you have.

I have a Savage 270 with unknown round count; would love a 25-06, but open to whatever.

BTW- great idea Seafire!

I have the following:

Rem 700 270Win 22" Matt. Tapped for sights. Was marked "new" when I bought it.

1903 Springfield 30-06 heavy target (after market) 26" I think. Can be cut off and rechambered. Bore is bright.

1917 Enfield 30-06 cut to 23 1/2. Bore bright, orig contour.

Keep this thing going...

1 SS 24in 30-06
1 matte 26 300RUM
1..Blue 7mm Mag
1 matte 22in 30-06
1 Douglas SS #5 26in 300 win mag
all are in good shape very low round count and fit Rem 700..

I have a few to offer:

Remington 700 22" matte 7-08 with sights
Remington 700 22" .243 sights removed
Remington 7 (?) 18.5"
Ruger 77 .243 light contour, no sights 20"
Winchester 70 26" "Classic Stainless" 7 mm Magnum
Ruger #1 7 magnum, 26"

Exterior condition varies, the bores are good. I bought these used several years ago with thoughts of rethreading to fit Mausers, but.....

If you are interested send me an email address and I can send a pic. I would be interested in a .338-06 for a Mauser, or a .338 Federal for Winchester or Remington.

Thanks,
Danny

i have what was sold to me as a new take off 22/250 rem sporter barrel 24" matte finish

looking for a 25/06 mountain contour rem. barrel ss preffered


Ed

I have a Win70 x 7mmWSM, blued factory sporter barrel, that I would trade for any Savage small shank.
Thanks!
Jeff

I have Rem 700's:
a 7/08 blued Mountain barrel, less than 100 rounds fired
Sell or trade

Here's what I have:

23.5" sporter weight barrel (.600" at muzzle) in 6-284 for LR Mauser. Unknown manufacture but I think it is a Douglas. Blued. 7-800 rounds fired. Throated for long bullets and am assuming a twist for long bullets. $55

Wilson 30 cal barrel. S/S, 27�, .630� at muzzle. 1 in 12" twist, 4 groove. Threaded for Small Ring, Mexican or Turk Mauser. NEW. $175

Savage blued barrel in 300 WSM. Small shank, 24�. Only 12 rounds fired. With magnum bolt face. $135

Win mdl 70 barrel in 308 Win. 24.75� Heavy/Tactical-.770� at muzzle. In the white, D&T for sights. $75

Trades for 35 cal barrel or maybe a 338-06 barrel

Anyone else?

Danny

I have a 308 700 rem if I could get you 7-08 I would have one to take off.

TTT
It would be nice if this were a sticky

Still looking...

Also have an older M700 gloss blued 243 barrel in very nice condition, and a very nice 30-06 matte barrel that I could trade.

Thanks.

I have two Mauser barrels, one in 30-06 and one in 270 win. Both are light contours, 270 is from a BRNO or CZ and has a parkerized type finish with front sight.

Anybody have a 35 cal barrel??

I have a new Adams & Bennett for a large ring 98, short chambered for .458 Win Mag. Picked it up doing some horse trading recently. It has never been finished. I already built a truck gun .458 with one of these so I don't need another. Still in paper from midway.


I would like any large ring barrel for 9.3x62 or if you want it just let me know what you might have to swap

I have a 20" Rem Model Seven blued in 223 Rem. I'm told 20 rounds fired. Has front but no rear sights. Not really looking for anything specific but open to offers. USPS MO always good, $50 shipped.

My 6-284 barrel is SPF
Still looking for a 35 cal barrel

^^^^^^^^^TTT^^^^^^^

UP with price adj:

I have a 20" Rem Model Seven blued in 223 Rem. I'm told 20 rounds fired. Has front but no rear sights. Not really looking for anything specific but open to offers. USPS MO always good, $35 shipped.

I still have:

Remington 700 22" matte 7-08 with sights
Remington 7 .308 18.5"
Ruger 77 .243 light contour, no sights 20"
Winchester 70 26" "Classic Stainless" 7 mm Magnum
Ruger #1 7 magnum, 26"

bores are good. I bought these used several years ago with thoughts of rethreading to fit Mausers, but.....

If you are interested send me an email address and I can send a pic. I would be interested in a .338-06 for a Mauser, or a .338 Federal or 22 inch .308 for Remington 700. Make an offer, I'd like to be rid of these.

Thanks,
Danny

bump

Anyone have a 24" new take-off .25-06 Model 700 barel? Matt or bright don't matter.

pm sent on the Ruger 243

i have an early model stainless .264 win mag barrel that is blued? or hard cromed black.fits 700 remington. also 22-250 blued sight holes and threaded for a break or supressor. dont know what i would trade for. iffin' you have any interst let me know

Traded the Ruger 77 .243, the rest are stil available.

Remington 700 22" matte 7-08 with sights
Remington 7 or XP .308 18.5"
Winchester 70 26" "Classic Stainless" 7 mm Magnum
Ruger #1 7 magnum, 26"

bores are good. I bought these used several years ago with thoughts of rethreading to fit Mausers, but.....

If you are interested send me an email address and I can send a pic. I would be interested in a .308 or .338 Federal or .338-06 for a Mauser, or a .338 Federal or 20+ inch .308 for Remington 700. MAKE OFFER, I'D LIKE TO BE RID OF THESE.

Thanks,
Danny

I have
1. 22-250 blued stryker 14 " low rnd . cnt
2. 222 rechamber to 223 AI High polish blue unknown rnd cnt.24" STD WT 700 rem.
3. 22" 700 Rem. blued STD Wt. 223 Recrowned
4. Nearly new Mod. 7 blued 223 20"
5. Varmint Small shank savage 223 wssm rechamber from 223 mod. 12 Blue.
6. 10' blued contender 357 mag with ramp Magnaport shell breaker& tool $175 shipped XLNT COND.
Would like a 25-06 varmint wt. 700 bbl. or 6-06 BBL. or 6-284 bbl. Savage or 700 rem. STNLS. or blued others considered
NONE OF THESE BBLS. ARE EVEN CLOSE TO BEING WORN OUT

I'm trying to find a stainless M700 mountain rifle contour (or KS contour) take-off barrel in .280 Rem and have stainless mtn rifle contour take-off barrels in 7mm-08, .284 Win (rechambered 7-08), .308, .270, and 30-06 to trade. Not really interested in selling any of them outright.

Thanks!

These barrels are still available from Paperkiller, turns out I didn't have what he needed.

I have a ss 24" mag contour 300 weatherby off of a bdl ss

A 22" matte 243 with sights off of a 700 adl synthetic

A 22" ss 30-06 off of a ruger mark II

A 24" ss xcr coated 300wsm off of a 700 xcr

Bb

I have a 270 and 25-06 both factory off of savages.

looking for a 6.5-06 savage barrel

bump

I have factory 270 WCF sporter taper and ER Shaw 338-06 barrels.

They're both chrome-moly and 22" long but the latter is a heavy magnum contour and parkerized with a recessed target crown.

I'm looking for a 6.5-06 or 6.5-284 Norma sporter contour barrel like CO1135.

bump

would still be interested in a SS take off barrel from a Ruger all weather in 7-08 and sporter contour

Got a couple laying around here that could use a new home:

- 300 Win Mag - 24" Shilen SS, Rem Factory Mag contour, tefloned, threaded for M700. No chambering marking.
- Rem 700 .308 SS SPS take-off SPF
- M70 Classic, 7mm Mag, SS w/Boss
- M70 Classic, 270 WSM SS


Would be interested in:

- M700 7mm-08 - Mtn or plain w/o sight holes, SS or CM
- M700 7mm Mag, SS Fluted
- M700 22-250 SS Fluted

Bump

Interested in 25-06 Remington 700
or .250 savage off 700 classic

Weaveman,

I could use a good 8mm Mauser barrel. Still have one?

Seafire, nice idea.

I've got a couple of barrels:

a Winchester 1400, fixed full choke in 12 ga, glossy blue, pretty good shape

a Green MT 10/22 16 1/2" in 22lr, new, never fired.

Would sell or trade both/either.

I'm looking for a Savage .223 barrel....

Ella

bump

Tracker,

A PM is on the way. What a great post to move some barrels.

the 264win barrel i had for sale is gone sold thanks bwitty72

I've got a Win Model 70 Featherweight contour 22" blued in 30.06. CRF action. Approx. 100 round count. Make offer or let me know what you have to trade.

I have:
1. a 700 .243 barrel, 22" off a B-series ADL, unknown round count
2. German Weatherby MKV 340 barrel, oversized chamber (needs rechambered)
3. Mossberg 835 24" VR woodland camo barrel, can't remember which choke it has in it (gun was stolen a couple years ago)
4. Mossberg 500 30" VR full fixed choke blued barrel
5. Rem M7 18.5" 7mm-08 with sights, unknown round count

Would like a 700 barrel in 6.5x55 or .338 Win
PM me if interested.

I'm looking for a ruger m77 6.5-06 barrel as well in addition to the savage 6.5-06

still have the .270 and 25-06 available

I have a 24" .243 off a 700 ADL synthetic. Matte, no sights, unfired
Looking for 7mag, 300 mag Rem700, 7mm wsm/saum, 300 wsm/saum Rem700

Neal

Great post!

I've got three used Stevens 200 small shank barrels.

22" .223 Rem
22" .223 AI rechamber (have dies as well)
22" 7mm-08 Rem

Looking for a small shank .358 Win or M70 push feed .338-06 barrel.

I'd be really interested in an unchambered .338, 1-10", #3 or #4, SS, fluted.

bump

Any one got a Ruger 338 Win mag, blue barrel?

SPF and a bump

I down to:

Remington 7 .308 18.5"
Winchester 70 26" "Classic Stainless" 7 mm Magnum
Ruger #1 7 magnum, 26"

bores are good. I bought these used several years ago with thoughts of rethreading to fit Mausers, but.....

If you are interested send me an email address and I can send a pic. I would be interested in a .338-06 for a Mauser, a .338 Federal or 22+ inch .308 for Remington 700. Or maybe some other short action .473" bolt Remington 700 barrel. Make an offer, I'd like to be rid of these.

Thanks,
Danny

I have a Ruger #1-A 7x57mm take-off barrel in excellent condition.

PM sent to "smithrjd"

Looking for a 7-08 stainless take off for a 700 Remington.

Tracy

Just got a deal from tracker. great post!

Whelenman

I have a 22" matte finished 7-08 rem barrel with sights. If your 308 barrel is same we could do a trade.

Here's what I have:

Mossberg 12ga, 28�, Modified choke, 2 �� & 3� shells. $70

Wilson 30 cal S/S barrel. Threaded for SR or Turk Mauser. 26� Sporter profile. $125

Rem 700 barrel in 270 Win. 22�, blued, sights. Less than 200 rds fired. $50

Rem 700 barrel in 7 Rem Mag. 26", blued, good shape. $50

T/C Contender barrel in 414 SuperMag. TCA Blued Super 16�. Base & front sight. NEW no box. $275

DPMS Upper for LR-308T. 16� CM w/ matte black Teflon coating. Flash hider, alum free float forearm. Fired 60 rds. $625

Looking for a 6.5 something for a Rem 700 (or blank). Might be interested in a 338-06 or 338 Fed too.

Here's what I have Rem 700 barrels, 300 Rem Ultra Mag 26" stainless, 300 Win Mag 24" stainless and ported, 300 Rem Ultra Mag 26" stainless and threaded for brake, Matte blue 700 Rem , a 7 Rem Mag and a 243 Win, In blue 700 Rem , a 243, 270, 30-06 and 7 rem mag Looking for a Ruger 77 Mark 2 in 338 Win Mag,blue or will sell for $30 plus shipping

up

up

I have a Sako 75 stainless fluted Varminter barrel in 22-250 in near new condition. I am looking for the same in .243.

Here are some barrels I have laying around. All are either low count count or new take off. Will trade, plus or minus cash, for decent scopes, 30mm rings, RCBS loading press, or tell me what you have... Don't need any other barrels. If you want to buy, just make an offer.

1. 300 Winchester Mag, 24" matte finish, no provision for sights, factory recessed crown, very nice bore, minor marks from storage

2. 7 mag, 24" matte finish, front sight in place, rear sight removed, factory recessed crown, very nice bore, minor marks from storage

3. 30-06, 22" matte finish, front ramp in place but no sight, rear sight removed, factory recessed crown, very nice bore, minor marks from storage, edge wear in blueing at muzzle

4. 7 mag, pretty much the same as #2 but with a few more marks and minor removal marks.

5. 22-250, 24" matte, front sight in place, rear sight removed, very nice bore, minor mark in finish

bump

All I have left is the 7mm-08 barrel.

Hi Badwolf,

How about the blue 270 barrel for 30.00, shipping included?

bump

I still have:

Remington 7 .308 18.5"
Winchester 70 26" "Classic Stainless" 7 mm Magnum
Ruger #1 7 magnum, 26"

bores are good. I bought these used several years ago with thoughts of rethreading to fit Mausers, but.....

I also have a Remington model 700 Mountain Rifle contour stainless steel .30-06 that I got in a trade here, I would consider trading it for a similar barrel in a short action Remington 700 caliber.

If you are interested send me an email address and I can send a pic. a .338 Federal or 22+ inch .308 for Remington 700. Or maybe some other short action .473" bolt Remington 700 barrel. Make an offer, I'd like to be rid of these.

Thanks,
Danny

still looking for a 6.5-06 for either a ruger or savage

I still have the 25-06 and 270 barrels and a 6.5 barrel blank in the white, make offer to buy or trade.

I need a 300 win mag or similiar for a remington. Anyone got bdl LA bottom metal?

You mind sharing the specs on the blank? Manufacturer, twist, length? In the white, I assume this means chromoly un-blued?

Looking for an LVSF barrel in .243.

I have a unfired 300wsm taken off a SPS.

I have an unfired (except at factory) S/S Rem 700 in 300 RUM.

bump, still got the 2 savage barrels available make an offer, either cash or trade

I have a blued .300 saum barrel from a remington model 7, it is 22 inches long , it looks really nice inside and out . the rifling is crisp and clean, it has a very low round count but can't verify the exact number . on the exterior it only has one small removal mark that would quite possibly be hidden under the stock line once its on an action. it is also drilled and tapped for open sites that are included with it.

what i want in trade is either a 7mm-08 barrel or a .280 rem barrel both must be at least 24".and for a rem 700 or savage
or i might consider a .260rem barrel

I have an Savage-Anschutz sporter (54 action) 22 mag barrel (double pin tenon, dual extractors) with sights. I'm looking for any small shank savage barrel in trade.

Got a couple laying around here that could use a new home:

- 300 Win Mag - 24" Shilen, SS, Rem Factory Mag contour, tefloned, threaded for M700. No chambering marking.
- M70 Classic, (CRF) 7mm Mag, SS w/Boss
- M70 Classic, (CRF) 270 WSM SS
- M70 Classic, (CRF) 300 WSM SS
- M70 Classic, (CRF) 7mm WSM Blued


Would be interested in:

- M700 7mm-08 - Mtn or plain w/o sight holes, SS or CM
- M700 243 Varmint SS Fluted (or equivalent)

Tell me about yuour 25/06 Price, threaded for, Etc.

I have these available:

Mossberg 12ga, 28�, Modified choke, 2 �� & 3� shells. $70

Rem 700 barrel in 270 Win. 22�, blued, sights. Less than 200 rds fired. $40
Rem 700 barrel in 300 RUM. 26�, S/S. NEW�factory fired only. $85
Rem 700 barrel in 7mm Rem Mag. 26�, blued. $40

Adams & Bennett 6.5mm Blank. 26� 1:9� twist, CM, F54 contour (heavy sporter/light varmint). $85

T/C Contender barrel in 375 JDJ. 14� blued, scope base. $225
T/C Contender barrel in 414 SuperMag. Blued Super 16�. Unfired, Base, 50 pcs of New, PRIMED brass. $275

DPMS Upper for LR-308T. 16� CM w/ matte black Teflon coating. Flash hider, alum free float forearm. Fired 60 rds. $625

Looking for a 6.5 barrel in lighter contour - A&B F34 OK

Splendid idea.

I have a 22" Rem. M-700 barrel chambered for 26-06, round count unknown, but bore is clean and rifling is sharp. Externally, some rub marks and superficial scratches; it had iron sights removed, with holes plugged.

Looking for M-70 Win. bbl, .358.
Or a blank for .17, .19 calibers, or threaded for Rem. M-700.

PM me with lunatic fringe ideas, or respond in this thread with any of the above.

I have a Custom Model 70(push feed)Shilen CM barrel(blued) chambered in 308 that has very few rounds down the bore. Barrel looks to be a number 6 taper, with a muzzle break, barrel length is 28"+2" KDF muzzle break. Plenty of room for a rechamber on the back of this barrel.

This barrel was one of three barrels chambered for one rifle, friend passed away.

Trade for?

I need a .223 for a 700 with 1:10 or faster.

I have the following take-offs:
Remington 700:
.300 WSM XCR 24" like new condition
.270 WSM SPS 24" 90% condition
.243 Win SPS 22" 90% condition
.243 Win SPS 20" 85% condition

Winchester 70 Left-hand CRF:
.30-06 Stainless 24 3/8" including BOSS, new take-off but exterior needs buffing
.35 Whelen Improved chrome-moly powdercoated grey (Adams & Bennet barrel)

I'm looking for Rem 700 barrels in 6.5mm, prefer 8 twist.
Jerry/AK

bump this to the top

7MM-08 and .223 barrels for sale or trade
I have a couple of Stevens ( Savage ) blued sporter barrels for sale or trade, one is a 7MM-08 and the other is a .223 I took these in in a trade and have decided I'm not gonna use em. $ 70.00 each or will trade on other short action caliber Savage barrels.
Wayne

I still have a savage 270 barrel willing to trade it for a SA savage barrel

Looking for a clean 7mag barrel, 24 or 26, SS or CM, fluted even better...NO SIGHTS! powdr

I have a Benchmark stainless .22 rimfire reverse taper for a Remington 40-x Gene Davis chambered. This barrel finished in the top 30 at the ASA nationals about 5 or 6 years ago and was never fired after that match. $175 gets is coming your way.

btt

How much on the ss 3006 barrel,how the rifling look
Don

Shilen chrome moly blued chambered in 308 by shilen, 28" long with muzzle break threaded for model 70 push feed, looks to be a #6 taper. Barrel looks unfired, off a switch barrel of a friend that died from prostate cancer...

Trade for what ever

I'll resurrect this thread!

I still have a Savage 110 CM take-off in 270 Win.

I'd love to buy/trade for a 9" twist 22-250, 7-08, or 308 Win barrel for same. If of interest for this purpose, I have a Stevens 200 take off in 243 Win that shoots light bullets nicely (75 gr HP Horns & 80 gr RP-PSPs).

Pm me if you'd like to wheel & deal!

Got a M700 24" 270 Win never shot and a Pre-64 270 in fair condition I'd like to get rid of.

I have several 700 223s & a 223 Ai, a 243win.,All std. wt.bbls all very usable bbls.

Didnt know about this thread. I have a like new 22 LR barrel,5 rd magazine and tools for a cz 455 American[no sites] that I need to get rid of. 90.00 shipped in cont. US.
601-906-5800

7mm-08 barrel off Remington Model 7. 18.5" blue. Sight holes, but no sights. 150 to 200 rounds thru it.

Looking for longer 22"-24" short action caliber barrel for rem 700. (.223, .260, 7mm-08 preferable)

Thanks

Dave

I have a Savage large shank 300 WSM, a Rem 700 7 mag CM barreland a Rem 700 243 sporter barrel.

I also have a 17" 30-06 barrel for an 03 Springfield

Looking for a long 7-08 or 280 barrel that can be turned and threaded for a Turk Mauser (minor diam needs to be .990").

Still have a small shank 270 Win from Savage 110.

Also have 7RM & 300 Weatherby for Howa 1500.

Would love a 25-06, 7-08, or 308 barrel for Sav 110.