- Pierce Titanium Short Action
- Pierce Titanium Recoil Lug (double pinned to action)
- .308 Bolt
- WSM bolt w/ Pierce's Ultralight Bolt and Handle
- One Firing Pin assembly for both bolts
- 7mm-300wsm Proof Research Carbon Fiber Wrapped Barrel 24"
- 6x47 Lapua Benchmark Barrel 26" (50 rds fired)
- Huber 2 Stage Trigger
-Pierce 20moa rail
- APA Muzzle Brake (timed for both barrels)
- Seekins Sling Stud Rail
- McMillan Stock 2 sling studs and adjustable cheek piece (grip
tape and padding are removable)
- Surgeon Bottom Metal
- Alpha 308 Mag
- 300WSM Mag
- RCBS FL Die Set 300WSM
- Forster Full Length Sizer 7WSM
- Redding 6x47 Lapua Type S Bushing Style Neck Sizing Die and
Competition Seating Die
- Hornady 270WSM Modified Case
-I will toss in all my fired brass as well

Everything is in excellent shape, small marks on the barrel and brake are photographed.
I am asking $3850 for the package (bipod is not included)
The good news is that like always I am willing to wheel and deal. I am willing to sell just the barreled action w/ dies.
I am also willing to accept trades (partial or whole). Items I am looking for:
Savage pre-fit barrels, Rangefinder, Rangefinding Binoculars, Magnetospeed, 10/22 reciever, ruger 22/45, barrel blanks, tikka 223, PWS t3, CG extreme trigger, etc.

That is the package to end all packages.

What is the difference between a 7mm-300 wsm and a 7wsm?

Different neck length

.038" longer neck, and .038" shorter body on the 7-300 vs the straight 7WSM.

Thanks aalf

Ask the dead critters.

so its currently a 6x47 lap barrel on it? this isnt a switch barrel rig im assuming, you just have the bolt and barrel if someone would want to switch it up. is the 7 barrel new? how much brass

It is a switch barrel rig. An action wrench and vise and it easy an easy swap. In the pics I have the 6x47 barrel. I actually have the other barrel on now if anyone would like pics of that.

BUMp

What contour is the 6 x 47? Do you know if the DBM bottom metal can be replaced with Bdl style hinged floor plate? I'm a little ignorant to the switch barrel but do you use a go � no go guage to get repeatable headspace or just fired piece of brass?

No, the inlet for the Surgeon metal is longer and deeper.


Neither.....screw 'em off, screw 'em on, snug 'em up a tad so they don't unscrew, and call it good.

Aalf you are the man! I really appreciate your help! Everything He said is spot on.

Bump it up!

Send it up again

Send it up again!