Remington 700, 300 Win Mag, Hart, McMillan

Remington 700, Stainless action
26" Hart #5 taper chambered in 300 Win Mag
with Vias break and bead blast finish
Smith work by Rex Reaneu
Approximately 100 rounds fired
McMillan HTG stock, bed to action
Factory Remington walker trigger
Nightforce scope rail
Reloading supplies included:
RCBS full length dies
49- pieces of brass
Approximately 65- Berger 168 grain
Approximately 200- Nosler 155 grain

$1,850 shipped for the package

Posting for a friend of mine but I'll answer any questions I can or find out.

I will post pictures tomorrow and I can email or text if needed.

Rifle weighs approximately 9.5 lbs

back up

need this sold

Couple of questions. Was the action trued? Is the barrel 26 inches plus the brake, or 26 with the brake? How good of groups was he shooting with it? What brand of brass? Best accuracy load database? Thanks. Bruce

I'll check on these questions.

Originally Posted by Gillettehunter

Couple of questions. Was the action trued? Is the barrel 26 inches plus the brake, or 26 with the brake? How good of groups was he shooting with it? What brand of brass? Best accuracy load database? Thanks. Bruce

The action was trued but the thread were not recut. The barrel is 26" plus the break. The gun shoots very well but never really shot for groups as this was a hunting gun. The loads fired through was with Winchester brass, Berger 168 hunting vld and RL25 powder.

Sale Pending

Sold