I am doing a barrel threading sale. $75 for each gun, if you bring in or ship 3 guns, the 3rd one is $25 with no limit. Each 3rd gun done is discounted at $25. All guns must be done at the same time to qualify. Includes all standard threads (no metric). Firearms must be disassembled. I can do it, but it will cost you $25. 1 week turn around.
Feel free to shoot me a text or call. Chad 817-933-9017 This is the easiest way to reach me.
I am located in Benbrook, TX. Of course you can ship them or drop them off.
By disassembled do you mean your pulling the barrel?
By barrel threading do you mean the muzzle end for a brake, or the breach end as in for a receiver...?
re
By disassembled do you mean your pulling the barrel?
If it is a bolt gun, then just down to the barreled action. If it is an ar, then yes just the barrel.
By barrel threading do you mean the muzzle end for a brake, or the breach end as in for a receiver...?
re
threading the business end (muzzle) for a suppressor or brake
I personally would refer to the later as barrel fitting on the other end and would require the chamber and bolt/extractor relief to be cut.
We do offer barreling services also.
See
www.titanweapons.com
Do you also provide thread protectors?
Do you also provide thread protectors?
I can do thread protectors as well. I can do both standard and custom fit to the gun. They are not included in the above price. $25 for standard and custom is per gun basis.
Chad does good work. Had him thread 2 barrels for me. Top notch guy to deal with.
Tagging this thread so I can find it again.
I bet I can find 3 rifles for you to thread.
Thanks.
Can you thread Berretta Storms?
Travis
if you can get the barrel off, I can thread it at the above price.
If you need it disassembled and rebuilt its $25 both ways (lots of parts)
How much to cut, crown & thread a barrel?
keep em coming. thanks for the business.
What is the minimum diameter barrel that you can thread 1/2 28?
What's turn around time right now.
What's the min diameter for 5/8x24?
What's the min diameter to thread 5/8x24?