Guys:

I have a limited number of McMillan CLASSICS, GAME SCOUTS, REM HUNTERS (wide forend), McMILLAN HUNTERS (narrower forend), and MOUNTAINEERS, ALL in EDGE, that I am going to sell for about a hundred bones below retail, while they last. These are inlet for Rem 700s.

I also have some Sako Hunters in EDGE inlet for Tikka T3's coming.

That's it. No Winnies, Rugers, Mausers, Sakos ... Nothings else coming on this deal. Hopefully we can put together another one soon.

McMillan charges $636 plus $30 shipping for a total of $666 for EDGE STOCKS. Bad number.

I like $569 better. Shipped. At these prices, I need a check or MO. No plastic.

As of now, they are inlet for 700 longs and shorts, ADL and BDL, mostly factory sporter barrels, some Mountain Rifle contours mixed in, with a 1-inch Decel at standard 13.5 LOP, and stainless studs.

The Sako Hunters are inlet for factory T3's

We might be able to make modifications (inlets, custom barrel channels, LOP, studs, etc), for the early orderers up until the point McMillan gets them manufactured, and then they are what they are.

I have asked that they be left raw so you can select your paint before shipping.

That's a sneak peak. I got all I could at these prices. When they are gone they are gone.

Please reply here and/or email me at [email protected].

Rick, I tried emailing but they are bouncing back....

Can you get a lefty 700 LA in a hunters edge/mountain contour with this sale? I'd take one.

Thanks,
Frank

Same here message says I need to verify I am a real live human but doesnt give me any prompts to do so. I would like a Classic edge for a Model 700 RH Solid olive for color. Todd Holman.

Can you get one for a m77

Guys:

Try hitting reply. I think that should do it.

Frank, I don't have any Hunter's EDGE patterns in the order, as everyone is after the Mountaineer.

Todd, please give me the barrel specs if it is a custom barrel. A Classic we can do.

Rd: No Rugers in this batch.

Also, I have edited the first post to include some McMillan Hunters (narrower forend) as well. So I will have both versions of the Hunters coming.

Rick,
I just ordered a short action Classic Edge ADL through the Gear Shop about a week ago - any chance of getting in on this deal?? I did order a special barrel inlet and red recoil pad so not sure if so???
Great deal by the way!
Thanks
Frank

I hit reply and sent you an email . But just in case I have a factory barrel on that XCR ii. Thanks Todd.

Would like a Classic Edge 700 Long Action BDL with Mag Sporter barrel channel if possible.

Black is fine.

im interested in a game scout what color schemes and inleting is available? Do any have the cheek riser?

I'd like a la, bdl, rt hand, rem mag bbl channel, hunters edge (narrow forend).

Speckled (colors ?) .... , or blk & gray swirl

Let me know

Tony

Rick, I tried emailing you at the address provided, same question for me, what colors are available for the Game Scout, I want one for a rem 700 LA, BDL, Remington Varmint profile or magnum sporter

Rick I sent a email but it wouldnt go through for a Tikka stock in short action. Its a 270wsm. Olive drab if possible. Got it to go through.

Let me know

john

Rick, I sent you an email. Thank you, and I look forward to hearing from you.

Chris

Rick, put me down for a rt. hand McMillan Hunter for 700 short adl with Remington Mag. Sporter barrel with 1 inch straight shank. Speckletone Olive with tan and gray specks and black .6 in. Decelerator pad if possible. Wish a non-monte carlo hunters edge was available but love the deal.

Rick. Sent you a pm with couple questions. Thanks

Chris:

Responded.

Walt:

You're IN!

Jerrad:

Responded.

Deadline on special inlets and customization is looming guys. I am guessing Friday, but that's just a guess.

Hey Rick- when do you expect these to be delivered?

Dave

Dave:

Quickly! My understanding is they are already molded up and need only to be inletted, pad, paint, studs. I believe they start inletting next week, so the deadline for custom non-factory stuff is probably end of this week.

Sent you a PM. Email wouldn't go through.

Email and PM sent.

Wow! I didn't even ask when I put in my order as I was thinking 3-4 months minimum. That is great to hear.

Ansley

Order sent!

Rick, looking for Classic S/A bdl sporter barrel.13.5 LOP with 1/2 pad if possible. brown with blk speckle. let me know if available. thx

Will take a Game Scout L/A ADL. Tried email but no go.

I'll take one if I can still get it.

Classic pattern
Rem 700 LA ADL
13.5" LOP
Barrel inlet - Shilen #3 w/shank length of 2" from action face
Gray with black specks
Black 1" decelerator pad
2 studs - stainless

I'll take another if I can still get it.

Mountaineer pattern
Rem 700 SA ADL
13.5" LOP
Barrel inlet - standard Rem factory mountain rifle contour
Brown with tan specks
Red 1" Decelerator pad
Stainless studs

I sent an email. I'd like if I can get one still with custom configuration?

Nick

Sent you a return email.

257:

In and in.

Hi Rick,

Need a LA 700, ADL with a sporter barrel and all the standard fixings. Looking at the mountaineer, any available?

Thanks!

Rick, sent a couple more emails regarding barrel channel and where to send my payment. Just making sure we're square. Thanks

Nick

Hello, I'm interested. Details? Jeff

Rick, sent an email to confirm the stock order.

Thanks a mil

Nick from Ga.

Rick,
I sent you a couple of emails for a Classic Edge stock but no reply, was asking to buy:
Classic Edge
Black with gray specks
R700 short action
Brux #2 contour, 1" shank
1" decelerator
BDL bottom metal

Thanks,
Marty

Looking for a mountaineer Rem 700 SA BDL if you have any left.

Pm sent

Rick,

Looking for another.

Classic Edge LA
BDL inlet
Rem sporter contour
Woodland transition camo if I can get that
If not.......Olive drab with tan and black specks
1" black decelerator
13.5" LOP

Will send email.

Got 'em!

Rick,

I would like McMillan Remington Hunter Edge
- Long Action, Sendero barrel channel, right hand, 1" black decelerator, 13.5" LOP - Olive drab with tan and black specs
- will it come with pillars installed?

Hopefully I can still get one?!

Thanks and please let me know where to send payment

Cbrook:

Done!

Rick,
Need a right hand Rem 700 long action, factory Mountain Rifle contour in and Edge.

What are my choices? Mountain Rifle perhaps, Hunters Edge?

Thanks,
Geo

I got my Game Scout Edge today!!! Looks awesome and will be perfect for my new build.

Thanks Rick for color advice!

Is this still going?

I got cbrook's Rem Hunter w/Sendero barrel channel. Who got my Rem Classic in Woodland Transition Camo??

Rick.....Emailing so hopefully we can fix this.

Got mine yesterday looks great!

Hope you get yours stighted up 257

Looks like a McMillan mix-up. Cbrook has my stock. LOL.

Also got mine - Classic Edge in record time no less but might be emailing you Rick. I ordered it with a red recoil pad and it came with the regular black pad so might need to have that changed.

I want a Hunters Edge, SA Rem 700 BDL with Hart 7-08 barrel, std. Remington contour.

Unpainted/bondo. I'll send it to McM for paint when I'm done glassing, etc. I've done that before.

13.5 LOP over 1/2" Brown Decelerator.

SS sling studs.

Tried to order on the store site, had problems.

DF

Hope to see mine soon.

Eileen at McMillan did us right. She sent us UPS labels to send stocks to each other direct and is mailing us free t-shirts for the trouble. McMillan is awesome!

Rick,

Your email is getting kicked back to me. Do you have any McMillan Hunters or Mountaineers for short action 700's?

+1 ...

Rick,

I'm interested in one for my stainless Rem M700 in 7Rem Mag, right handed ADL, preferably black with grey.

Also possibly interested in one for my right handed Rem M7 in 308.. Again preferably black w/ grey.

Any chance you have or will have these?

Thanks, love your site!

Dave

Sent an email with a question. Thanks Rick

I'd like to get one. Pm me and we'll work out the details, or email to [email protected]

Is this still valid? I haven't seen any posts from the OP in quite awhile.

Looking for a classic short action, right hand, remmington BDL.Standard barrel for a .260 rem.Black with gray specks.

I sent 2 emails, a PM, and posted on the thread. I have not gotten a response.

Do you have a mountain bdl available?

Hi Guys.

Sorry for the delay. i was hunting.

Cageycat: I have that.

Rylee: I do, in long action

Smj: I'll PM you.

I am interested,pm me with the info Rick. Thanks.

GameScout
Rem 700 SA
GAP Camo
M5 Stealth Bottom Metal
Proof Sendero Light contour

I know this is old but are there any of these left? I need a short action game scout with a brux #5 contour.

Any McMillan Hunter edge stocks available for a short action Remington 700 or a 700 long action magnum?

Looking for a Hunters Edge inlet for Tikka T3 standard barrel channel. You have any of these available, or in the future?

Hi Rick,

I've been following your posts and it looks like you usually have Remington 700 stocks available.

Can you also provide any stocks for Sako L691?

Thanks,

Terry

Hi Rick,

I am looking for a stock for a Remington 700 LA, 300 win mag sendero heavy barrel. I would like the stock to have an adjustable A5 check such as the 6303 or 6308. If you have one please let me know. Thank you.

Robert

I'm looking for a Edge filled Game Scout for a Deviant Tactical (medium) action and Badger M5 bottom metal. Preferably in Kryptek Highlander. If you can help, please PM me.

Is this deal still going ??

Tanner

I have some Classics and some Game Scouts left in BDL with factory barrel channels, and some Rem Hunters with varmint barrel channels, and one Classic in long action BDL with a magnum barrel channel.

Short action Classics and GameScouts with sporter barrel channels? Would you mind sending me a PM?

Tanner

Rick, do you have anything in a Classic RH SA? Can you tell me approx how much these weigh?

Is this one still available?

Do you have the Edge stock for a RH Tikka T3x available?

Bumpety

I'm looking for a game scout edge in r700 long action. Have any in stock?

I do. They are built, simply awaiting your paint color choice. Please email me at [email protected].

Pm sent with a question.
Thanks,
Ronnie