Home
Posted By: Idaho44 300 H&H build - 12/21/19
Want to start a 300 H&H build off pre 64 action, I have a few 30-06 rifles I'm looking at just for their actions. Question is what is a decent price if i were to just find an action alone, and second question is there anyone that has an action they are wanting to sell and for how much?
Posted By: Switch Re: 300 H&H build - 12/21/19
www.pre64win.com

Pricey Actions going for $950.00
Posted By: hmpwinm70 Re: 300 H&H build - 12/21/19
I sent to you a PM
Posted By: jimdgc Re: 300 H&H build - 12/21/19
Probably better to buy an entire rifle and sell the parts you don’t want. There are some parts unique to the H&H cartridges that may be difficult to find if you don’t start with an H&H action and magazine. Redneck is knowledgeable about this and may be worth talking too.
Posted By: handwerk Re: 300 H&H build - 12/21/19
what is your build going to look like? wood stock or synthetic? Are you wanting a 300 H&H barreled action?
Posted By: Jgotro Re: 300 H&H build - 12/21/19
I have a complete custom ill sell
Posted By: Orion2000 Re: 300 H&H build - 12/22/19
Originally Posted by jimdgc
Probably better to buy an entire rifle and sell the parts you don’t want. There are some parts unique to the H&H cartridges that may be difficult to find if you don’t start with an H&H action and magazine. Redneck is knowledgeable about this and may be worth talking too.

Sound advice here ^^^^^^^ ... Been down this road with a Post-64. It is do-able. However, simpler to start with a M70 action originally set up for H&H length cartridges.
Posted By: Idaho44 Re: 300 H&H build - 12/22/19
To further what I'm looking for, this build will be a few years in the making. I already have a custom 300 win mag on a Husqvarna that I'm looking to sell, a custom 6.5-06 on an FN, a stock 270 featherweight on a pre 64, and a 308 on a Husqvarna. I'm a fan of calibers that you don't hear much about anymore, hense the reason I'm wanting a 300H&H. I will hand load. This rifle will be fitted with a custom piece of Turkish walnut, not sure the barrel yet (Pac-Nor, Krieger, etc.) by the time I get to that point hopefully Pac-Nor is up and running again. I'm not opposed to a Mauser action, heck the pre 64 was modeled off it. I'll try to add some photos of my custom rifles to give an idea of what I'm after. Thanks for all the advice.

Attached picture IMG_2225.jpg
Attached picture IMG_2224.jpg
Posted By: comerade Re: 300 H&H build - 12/22/19
Keep us posted. Obsolete, maybe to some...not to me.
Posted By: wapiti22 Re: 300 H&H build - 12/22/19
You are looking for the pre-64 long magnum action used on the 300 and 375 H&H rifles

Try Jim Kobe. JKobe on this site

Also. Pre64win.com
Posted By: Idaho44 Re: 300 H&H build - 12/22/19
If I can find one, if not my gunsmith will open the rails and fit the barrel on a 06 action
Posted By: coyo Re: 300 H&H build - 12/23/19
I have a pre 64 model 70 action that i would sell.
Posted By: handwerk Re: 300 H&H build - 12/23/19
I put a #2 Lilja on my Pre 64 M70 300 H&H and it worked out to be a great choice.
Posted By: glazer_1972 Re: 300 H&H build - 12/28/19
I sent you a pm.
Posted By: CRS Re: 300 H&H build - 12/28/19
Originally Posted by handwerk
I put a #2 Lilja on my Pre 64 M70 300 H&H and it worked out to be a great choice.


I used a #2 pac nor on my model 70 classic action 300 H&H and it also turned out to be a great choice.
© 24hourcampfire