Rem 700 Ti early three digit LA action.
Action seats and face as well as bolt lugs and face recut by Mark Penrod. The receiver threads were not touched because they are perfect.
Krieger CM 1-10 barrel, blued, 270 Win. Bore very good. Chamber cut with my Hugh Henricksen reamer slightly throated for OAL appx 3.48”. Aftermarket recoil lug.
Bansner ADL sheep hunter stock, all work by Alex Sitman of Master Class. Paint by Mark Bansner. Sage green with black “dots”. There are minor rub marks on stock from a goat hunt.
BAT alloy ADL style bow.
Quite accurate. Load data available.
Weight: 5 pounds 8 oz on my scale.

Price $2850. Buyer pays shipping. Must ship to FFL unless buyer lives in SE Idaho.

I can respond until Wed 29 Jan then unavailable for 9 days.

I have a set of Leupold dual dovetail mounts that have been meticulously aligned and lapped for $50. Weighs 5-12 with mounts.

Is the barrel contour the original Mt Rifle contour?

Nice rifle, sounds like the right people put it together. I am also interested in the barrel contour.

It is close to a Krieger no.1+ but a little “meatier”. Will find someone to post pics.

A fellow wants mounts if that makes a difference.

What is the bbl length?

How do you define quit accurate? 1/2 moa? What were the accurate bullets?

It will shoot cheap’o Federal Blue box 130’s into about .7”. My handloads with Barnes TSX & TTSX are a little better. With my hunting rifles I stop when they shoot .75” or better. Length crown to bolt face 22.75”

You can look at it today. It is in your home town. No shipping etc.

What weight TTSX/TSXs? Where in Boise?

All I have tried are 130’s. That load will penetrate around 34” of Eland.

Unable to respond until Sat 08 Feb