What grease do you use for the pivot pin on your over and under shotgun?

White lithium, fishing reel grease ...or?

Thanks!

Virgil B.

Oil or Grease is the question....

Prefer Mobil 1 synthetic motor oil...Grease is fine as long as it flows and is replaced on a regular basis, since it can entrap debris that may grind. And if it flows then one may as well use a good oil...

However, did know a guy who lathered up his Beretta with lithium and got 200,000 out of it...But he cleaned it off and reapplied it frequently...Same with a quality oil..clean and reapply frequently.

Moly grease for warmer/hot weather - STP for winter/cold weather shooting..

Perazzi....grease and oil....

https://www.giacomosportingusa.com/faq.asp

Another vote for STP. A quart will last approximately 100 years, plus or minus.

Thanks guys!

Gotta get my CZ lube up a bit. It's pretty dry from the factory.

Virgil B.

I have something called "Hinge Pin Jelly" that seems to work pretty well. I use it for hinge pins, bow limb bolts, lube for my roll crimper(shotshells) ust about anything that just requires a finger tip of lube.

I use Loctite Super Lube.

Recommended by a buddy of mine who shoots Kreighoff, Perazzi, Ljutic, Seitz, etc. Figured it was good enough for my club.

STOS.

I use it for sizing lube, fishing reels and anything else that needs a little coat of lubricant.