Guess on whether double dovetail LOW Leupold rings

will fit Zeiss Conquest 4.5x14-44 - Remington long action sporterweight barrel ?

Too low you think ?
I hate ordering things and having to send them back or throw them on the pile of 'things I'm not using' .
Have burris rings missing a screw because a dog showed me how much it loved me while I was working on the scope rings .
Burris is MIA - no answers -no screw in months .

It's the eyepiece end that's likely to be the problem.

Originally Posted by mathman

It's the eyepiece end that's likely to be the problem.

The ocular is going to be close to the same size as the objective (44mm). I'd get medium height, just to be safe.

Thanks .

If you have the base and scope....

Stack quarters till you get minimum clearance then measure the thickness of the quarters. Then you will know exactly what you need.

Originally Posted by Mjduct

If you have the base and scope....

Stack quarters till you get minimum clearance then measure the thickness of the quarters. Then you will know exactly what you need.

That’s good to know!

Originally Posted by Mjduct

If you have the base and scope....

Stack quarters till you get minimum clearance then measure the thickness of the quarters. Then you will know exactly what you need.

So I said to the guy at the gun counter, “I need 6 bit rings.” 😁

Have same scope and leupold extra lows on a tikka

Originally Posted by navlav8r

Originally Posted by Mjduct

If you have the base and scope....

Stack quarters till you get minimum clearance then measure the thickness of the quarters. Then you will know exactly what you need.

So I said to the guy at the gun counter, “I need 6 bit rings.” 😁

We need a like button on this forum