Anyone know where to get them these days?

Ted

If you have problems sourcing what you need, an adjustable king-pin reamer works fine to ease out a set of 1" rings.

I ended up using Burris Signature rings and Dremel tool.It worked.I have a Nickel Marburg scope that wouldn't fit in SAKO 26mm rings.

Optics Trade

https://www.optics-trade.eu/en/riflescopes.html?___from_store=int

$15 Solution. I use these on a vintage 26mm Schmidt & Bender rifle scope and have had zero issues:

https://www.brownells.com/optics-mo...cers/delrin-ring-reducers-prod18588.aspx

Yukoner, I sent you a pm.

I have a set of Weaver 26mm rings

I have found that 1" Burris signature rings will work with 26mm scopes. The polymer inserts have enough flex to accommodate the slightly larger tube, since1-inch scope tubes measure 25.4mm.

I posted earlier I had Weaver 26mm rings, my mistake. They are 7/8"--DUH !

PM me your address. I’ll send you a pair.


Okie John

That is GoodGuy stuff... Kudos.

A few companies still make them. Rusan in Croatia has a good range of every tube diameter rings including 26mm.

ILya

TPS makes picatinny if you need them.

Arrived safe and sound, OJ. Sent you a PM.

Great site! Thanks to everyone who chimed in here.

Ted

Anyone have a pair of these?

Or 30mm gloss Leupold standards and inserts?