Looking for recommendations. Planning to put a fixed 10 SWFA on a T1x 17 HMR. Would like to keep it as low as feasible.
Thx
Talley lightweights- Low
Same as T3/T3x
Talley lightweights- Low
Same as T3/T3x
This is what i used on my rig.
Thanks for the recommendations. Have Lightweights on most of my rifles, but hadn't looked at those for this one. Haven't used a rail mount much and wasn't sure if I would be able to get scope mounted low enough.
I used the Burris Signature Rimfire rings on my T1X -
https://ads.midwayusa.com/product/1362181598 I could not see the point on putting a rail on top of an existing dovetail, to add a rail to the top just adds height and adds another unnecessary item to create a potential problem.
drover
DIP 25 moa rail with SWFA SS-Tac low rings. It's pretty low and works well with my SS 6x42 scope. It's also pretty cost effective.
Area 419 20moa rail and low mounts should work well. I have the Same base with medium mounts and it is a little to high I had to add a cheek piece to mine. But I think lows would work well.
I looked at the DIP rail and I like it. Ordered the Lightweights and will try those first.
Thanks guys!
I would be buying the Sportsmatch TO35C - looks like the 11mm dovetail equivalent to the T084, which is my favorite mount for the T3/T3x.
I would be buying the Sportsmatch TO35C - looks like the 11mm dovetail equivalent to the T084, which is my favorite mount for the T3/T3x.
That's what I am hoping to use for a SWFA 3-9
Area 419 20moa rail and low mounts should work well. I have the Same base with medium mounts and it is a little to high I had to add a cheek piece to mine. But I think lows would work well.
I have this rail on my T1x and had an SWFA 10X in Vortex Pro low rings. Worked great.