I looked through the past 10 pages or so of topics and could not find anything.

If anyone has a 2 cavity mold laying around/for sale for a 40 cal bullet with a .411 diameter throwing WW around 300 to 330 grains I'd be interested in hearing from you.

Send me a PM.

Thanks,

Matt

Go searching for a bullet mold for Winchester 4405 bullet.

I have one in a spitzer configuaration; gas checked.

You can get a custom, to your specs, from Accurate Molds in Salt Lake easier than you can find one. Last one I got, was a custom single cavity aluminum, to my door in less than 2 weeks, for under a 100 bucks. You just cruise their site, pick your style number, fill in the dimension blank boxes, specify your preferred alloy to be used, Tom calculates the final actual cut dimensions of the mold to produce the right size for your throat, submit your credit card, watch the mailbox. Done.

His molds are outstanding. I have a couple. One is a .411 with two different size cavities. One a 400 grain and the other a 320. I got it to cast for my 400 Whelen.

Mine is a .412 300 gr. RFN GC that Buffalo Arms built me for a $150. like 3 years ago! Double cavity iron, shoot it in my 405 JESS!