Have that rig thoroughly checked out...... Could be that exhaust is somehow leaking back into the cab Just enough to cause problems during extended use
If it were diesel fumes it would be easier to detect
I always thought that OTR trucking might be the most boring job a person could have until I helped an injured friend plant several thousand acres of wheat.
Nice, that was me peering over the push mower today for two damn acres cutting the old church lady's grass, and the reason I didn't open the pit bull thread, today was my day to be nice, that dog would have just pissed me off!
Campfire pals, please ponder, discuss and add your own introspective observations.
Deep thought #1. Sam doesn't realize we have humans eyes that are side by side and not one on top of each other so he doesn't think to turn the phone on its side. . Of course, I can't say for ants.
Morning, stereo cranked & a huge mug of coffee. Lunch, chill, a sandwich, fruit cup, pudding, water etc. etc. After lunch hammer down for a while, stereo cranking.
Toward the end of the day, more stereo & beer.
Or if that don't take the edge of mind numbing boredom off, burn one & enjoy the ride.
Campfire pals, please ponder, discuss and add your own introspective observations.
Deep thought #1. Sam doesn't realize we have humans eyes that are side by side and not one on top of each other so he doesn't think to turn the phone on its side. . Of course, I can't say for ants.
Campfire pals, please ponder, discuss and add your own introspective observations.
Deep thought #1. Sam doesn't realize we have humans eyes that are side by side and not one on top of each other so he doesn't think to turn the phone on its side. . Of course, I can't say for ants.
My bet would be that Sam spends a lot of time w/ earbuds installed absorbing the knowledge of the ages...and listening to Miles Davis. Alone time can be a good time. Working dark to dark, not so much.
Believe it or not the only thing I listen to is the machine. Every once in awhile you detect that something isn't right. Bearing going, header not jiving right, etc.
I do however sing to myself....alot....spare you the footage!
Believe it or not the only thing I listen to is the machine. Every once in awhile you detect that something isn't right. Bearing going, header not jiving right, etc.
I do however sing to myself....alot....spare you the footage!
My wife has this white-noise machine supposed to drown out me snoring, it plays raindrop sounds on metal roof, seashore, or crickets and rain frogs
I cant sleep with that shît on
After a while, on that crickets and frogs one, I can hear someone screaming at 6 second intervals. Its faint, really far off, but I can hear it.
Believe it or not the only thing I listen to is the machine. Every once in awhile you detect that something isn't right. Bearing going, header not jiving right, etc.
I do however sing to myself....alot....spare you the footage!
My wife has this white-noise machine supposed to drown out me snoring, it plays raindrop sounds on metal roof, seashore, or crickets and rain frogs
I cant sleep with that shît on
After a while, on that crickets and frogs one, I can hear someone screaming at 6 second intervals. Its faint, really far off, but I can hear it.
My wife has the EXACT same noise maker. She plays it on the 🐸. I wake up sometimes and wonder WTF is that noise?
After a day in the swather all you hear when going to sleep in the whiny hum of the hydro.
I like it - good honest productivity of a guy's own doing. And, plenty of time to think - the deep thoughts about heavy issues, the long thoughts that lead to plans and accomplishments, the fun thoughts about lovely people and events. Looks to me like a good day - a good life.
My first thought, The field would lay down faster if the machine were moved to the right a bit, and the header lowered. grins, appreciate the pics and videos Sam. My little place is so chopped up and hilly, I have to open six fields and spend 8 hrs to cut ten acres with a 14 foot John Deere swather. But I don't have to worry about getting bored.
Sam, I’m the same when running a skid steer. I want to hear what’s going on.
You know it could be worse. You could be on an excavator all day running a breaker. “Tunk, tunk, tunk.....tunk, tunk, tunk”
Heeler, I couldn't do it. Do not put me in a back hoe, it'll get ugly in a hurry! Guess I could handle a breaker....maybe...
SC, I hear you. Rinnnnnnnnnnnnnnnnnnngggggggggggggggggg all day long.
CCCC, it is funny what a guy will start thinking about. Sometimes you kinda go into a conscious dream.
As for the work, I love to see bales on the ground. A big haystack is a good thing to have going into winter.
LJ, I don't know about this movie star stuff....
Jim, didn't someone write a song about that?
Speaking of the green, it is up there. Just barely hanging on though. Breezy this afternoon but I wasn't overly worried about starting a fire. (knock on wood)
Idaho, hell all we use is that NH 2450 with a 14' header. Great machine, perfect for the irrigated river bottom stuff buy undersized for the thinner dryland hay.
Lot's of guys in the hills are running +20' drapers with bigger tires and better suspensions. We need to buy a bigger swather for the hills and keep the smaller one for the heavy alfalfa.
Gunner, I like it!
Back in the shelter now though. Woman and the dogs are good too....
I wasn't allowed to ear headphones when I was a kid running an old Ferguson TO30. Was told I needed to hear what the hell was going on and not be distracted. I hated it. But have come to appreciate it greatly. I used to have a repertoire of several dozen songs. I've a voice that carries, but am often told to stop singing. If I'm working in the shop the fam claims they can hear me in the house.
Deep Thoughts From a Shallow Mind was an awesome album from Doug Supernaw. I hadn't listened to those songs in years. (no offense or implication Sammo. Just the thread title sparked an odd almost forgotten memory).
When you're young you don't really give a chit, jam out!
My 10 year old nephew likes to ride in the ol' JD 4450 while I bale hay. First day he asked if it had a radio. I said yeah but we aren't listening to it.
Why not?
Because we are listening to the diesel do the singing.
Now we sing stupid ass, made up songs to each other about goofy chit. I get a kick out of it!
When you're young you don't really give a chit, jam out!
My 10 year old nephew likes to ride in the ol' JD 4450 while I bale hay. First day he asked if it had a radio. I said yeah but we aren't listening to it.
Why not?
Because we are listening to the diesel do the singing.
Now we sing stupid ass, made up songs to each other about goofy chit. I get a kick out of it!
You need one of them newer tractors with a buddy seat.
You should be an eye dr and listen to little old 90 year old ladies cry about how they still cant see 20/20 and read the lifestyle required newspaper with their new specs after you told them 30 times they are gradually going central vision blind from macular degeneration from living too fughking long.
Campfire pals, please ponder, discuss and add your own introspective observations.
Deep thought #1. Sam doesn't realize we have humans eyes that are side by side and not one on top of each other so he doesn't think to turn the phone on its side. . Of course, I can't say for ants.
Pugs, you telling me these things work sideways?!
Mine doesn't seem to for video Sam.
Of course, it's a model that's been obsolete since before The Donald was elected, so what do I know.
You should be an eye dr and listen to little old 90 year old ladies cry about how they still cant see 20/20 and read the lifestyle required newspaper with their new specs after you told them 30 times they are gradually going central vision blind from macular degeneration from living too fughking long.
I'd rather sit in a 50 yo cabless tractor in -30 pushing snow with a blade on the 3 point singing to myself to make sure I'm still awake.
I do feel for you re the money per hour you make. Get some ear buds and listen to Hannity and Rush or risk going stark raving crazy rather than contemplating becoming a killer of little old ladies.
Jim, I don't mind the radio in the pickup(sometimes) but anymore could do without it.
Music is good with beer and I rarely drink outside of the house...
Ethan, nephew is still small enough that he gets by sitting on the lowered armrest. Actually not a bad spot.
But yeah, a buddy seat would be sweet. Only cost another $100k!
I hear you.
Wasn't out in the hay today but mowed a bunch for my cousin yesterday. About like being on the boat. You feel like you're still on the tractor for quite awhile.
You should be an eye dr and listen to little old 90 year old ladies cry about how they still cant see 20/20 and read the lifestyle required newspaper with their new specs after you told them 30 times they are gradually going central vision blind from macular degeneration from living too fughking long.
I'd rather sit in a 50 yo cabless tractor in -30 pushing snow with a blade on the 3 point singing to myself to make sure I'm still awake.
What do you like to sing?
Richard boy and I sing Rocky Top and Rose of Alabammy.
When you're young you don't really give a chit, jam out!
My 10 year old nephew likes to ride in the ol' JD 4450 while I bale hay. First day he asked if it had a radio. I said yeah but we aren't listening to it.
Why not?
Because we are listening to the diesel do the singing.
Now we sing stupid ass, made up songs to each other about goofy chit. I get a kick out of it!
10 year old nephew???
There's that auto steer you were mentioned wanting a few post back.
I was going to suggest borrowing Jim's Richard, but seems you have one in the making already.
Nothing like boring work to get the mind in gear.
Brainstorming can be fun. As long as the rest of the world doesn't hear me that is.
Jim, might I suggest teaching Richard Boy...............
Put Another Log on the Fire?
It's a song the women in his life will love later on.
If he starts up while in the house with mom, especially if he lights into it when she asks him to do something, his life could be more interesting than it is today.
You should be an eye dr and listen to little old 90 year old ladies cry about how they still cant see 20/20 and read the lifestyle required newspaper with their new specs after you told them 30 times they are gradually going central vision blind from macular degeneration from living too fughking long.
I'd rather sit in a 50 yo cabless tractor in -30 pushing snow with a blade on the 3 point singing to myself to make sure I'm still awake.
What do you like to sing?
Richard boy and I sing Rocky Top and Rose of Alabammy.
Charlie Robison Some Willie Some Waylon Some Jones Chris Knight Metallica if I'm really lit
Not made for it. Love it, born to it, but couldn't do it for a living. My hat is off to them that do and can.
Mine too, BGG. I drive by and see the big fields my grandad used to spend all day planting and breathe the fresh air and think about how nice before thinking about the exhaust he breathed half the day from the exhaust 2 feet over the cowling when the coastal breeze was from the south.
Or my other Granddad trodding all those miles on foot all day over the clods turned up by the plough Ole Bill pulled and remembering the smell of those sweet corn farts he emitted all day.
Hot dayom i hope that Eve biotch had fun being seduced buy Satan.
I've been known to rock out to a little self sang Justin Bieber, and sometimes Taylor Swift when running machinery, or if leading a pack train by myself all day.
I usually look around once I'm done to make sure no one was watching.
Campfire pals, please ponder, discuss and add your own introspective observations.
Deep thought #1. Sam doesn't realize we have humans eyes that are side by side and not one on top of each other so he doesn't think to turn the phone on its side. . Of course, I can't say for ants.
Pugs, you telling me these things work sideways?!
Mine doesn't seem to for video Sam.
Check your settings, it may be locked in vertical format.
Campfire pals, please ponder, discuss and add your own introspective observations.
Deep thought #1. Sam doesn't realize we have humans eyes that are side by side and not one on top of each other so he doesn't think to turn the phone on its side. . Of course, I can't say for ants.
Pugs, you telling me these things work sideways?!
Mine doesn't seem to for video Sam.
Check your settings, it may be locked in vertical format.
mmmmnnn?
There's possibly a setting for that?
I can take stills in either orientation, no change in settings.
Why do they make these things so hard for old people to understand? If I was around one of my teenage nieces I'd ask them to find that setting for me. Now I have to try to do it without screwing up everything else!
Campfire pals, please ponder, discuss and add your own introspective observations.
Deep thought #1. Sam doesn't realize we have humans eyes that are side by side and not one on top of each other so he doesn't think to turn the phone on its side. . Of course, I can't say for ants.
Pugs, you telling me these things work sideways?!
Mine doesn't seem to for video Sam.
Check your settings, it may be locked in vertical format.
mmmmnnn?
There's possibly a setting for that?
I can take stills in either orientation, no change in settings.
Why do they make these things so hard for old people to understand? If I was around one of my teenage nieces I'd ask them to find that setting for me. Now I have to try to do it without screwing up everything else!
If you can snap in both orientations, probably not locked.
Jag, today was one the easiest 'work' days of the year.
Sit on your ass all day.
And yes the A/C works great.
Blew the radiator out with the pressure washer(again) before we left the riverbottom and engine temp gauge didn't hit 180F all day.
Rough in places though.
Could use a softer seat.
I use the air compressor to blow the radiator out because I'm afraid of bending the fins with a pressure washer. Mine needs it...AGAIN. Takes about five minutes for it to get about plugged up again. The a/c did work pretty good this year though. Only got uncomfortable in the cab a few times. Then again I think its only reached 100 maybe a couple of times. Lots of 95 degree days though.
Hay only made about half what it did last year, but last year's crop came out a lot later, probably hurting the yields.
I mowed most of my rough-as-hell meadows in 6th gear. Got on my cousin's big, smooth meadow. I was hurling along in 7th. I dropped back to 6th in some rough stuff and saw he was broke down, so I gave him a ride to the gate where my wife taken him over to his shop to get some shixt to fix his mower. He was riding and he's like, "why you goin' so slow?". Shixt ALL my stuff is too rough to go any faster. I think he was running in 8th all over the field. Open station tractor too. Like, a 1968 or so IH 856. Screw that old-school shixt.
You're right, about seats. I could use some more padding.
Jag, today was one the easiest 'work' days of the year.
Sit on your ass all day.
And yes the A/C works great.
Blew the radiator out with the pressure washer(again) before we left the riverbottom and engine temp gauge didn't hit 180F all day.
Rough in places though.
Could use a softer seat.
I use the air compressor to blow the radiator out because I'm afraid of bending the fins with a pressure washer. Mine needs it...AGAIN. Takes about five minutes for it to get about plugged up again. The a/c did work pretty good this year though. Only got uncomfortable in the cab a few times. Then again I think its only reached 100 maybe a couple of times. Lots of 95 degree days though.
Hay only made about half what it did last year, but last year's crop came out a lot later, probably hurting the yields.
I mowed most of my rough-as-hell meadows in 6th gear. Got on my cousin's big, smooth meadow. I was hurling along in 7th. I dropped back to 6th in some rough stuff and saw he was broke down, so I gave him a ride to the gate where my wife taken him over to his shop to get some shixt to fix his mower. He was riding and he's like, "why you goin' so slow?". Shixt ALL my stuff is too rough to go any faster. I think he was running in 8th all over the field. Open station tractor too. Like, a 1968 or so IH 856. Screw that old-school shixt.
You're right, about seats. I could use some more padding.
I use a blowgun with a small opening to blow out radiators in the field. Small opening, and really does a great job!
Yes Harbor Freight does have a few things worthy of owning...
I do periodically pressure wash everything, including the radiators. I just use a medium nozzle, and try to not hit it from the side. Not bent any fins.
Those air ride seats are worth their weight in gold! All three of my machines have an air ride seat.
And a stereo. Used to not listen to anything but the machinery, but have found out that I can listen to talk radio with it drowning out what I need to hear. Music does drown out too much... So I ride around listening to Rush...
Jag, today was one the easiest 'work' days of the year.
Sit on your ass all day.
And yes the A/C works great.
Blew the radiator out with the pressure washer(again) before we left the riverbottom and engine temp gauge didn't hit 180F all day.
Rough in places though.
Could use a softer seat.
I use the air compressor to blow the radiator out because I'm afraid of bending the fins with a pressure washer. Mine needs it...AGAIN. Takes about five minutes for it to get about plugged up again. The a/c did work pretty good this year though. Only got uncomfortable in the cab a few times. Then again I think its only reached 100 maybe a couple of times. Lots of 95 degree days though.
Hay only made about half what it did last year, but last year's crop came out a lot later, probably hurting the yields.
I mowed most of my rough-as-hell meadows in 6th gear. Got on my cousin's big, smooth meadow. I was hurling along in 7th. I dropped back to 6th in some rough stuff and saw he was broke down, so I gave him a ride to the gate where my wife taken him over to his shop to get some shixt to fix his mower. He was riding and he's like, "why you goin' so slow?". Shixt ALL my stuff is too rough to go any faster. I think he was running in 8th all over the field. Open station tractor too. Like, a 1968 or so IH 856. Screw that old-school shixt.
You're right, about seats. I could use some more padding.
I use a blowgun with a small opening to blow out radiators in the field. Small opening, and really does a great job!
Yes Harbor Freight does have a few things worthy of owning...
I do periodically pressure wash everything, including the radiators. I just use a medium nozzle, and try to not hit it from the side. Not bent any fins.
Those air ride seats are worth their weight in gold! All three of my machines have an air ride seat.
And a stereo. Used to not listen to anything but the machinery, but have found out that I can listen to talk radio with it drowning out what I need to hear. Music does drown out too much... So I ride around listening to Rush...
You guys,
riddle me this one Batman.
They've been making tractors for how long now? And you folks been cutting hay and alfalfa for how long now? And having to stop to clean off the radiator/A/C condensor for how long now?
Don'tcha think they could have figured out a way for you to do at least a half days work without risking the engine overheating?
Jag, today was one the easiest 'work' days of the year.
Sit on your ass all day.
And yes the A/C works great.
Blew the radiator out with the pressure washer(again) before we left the riverbottom and engine temp gauge didn't hit 180F all day.
Rough in places though.
Could use a softer seat.
I use the air compressor to blow the radiator out because I'm afraid of bending the fins with a pressure washer. Mine needs it...AGAIN. Takes about five minutes for it to get about plugged up again. The a/c did work pretty good this year though. Only got uncomfortable in the cab a few times. Then again I think its only reached 100 maybe a couple of times. Lots of 95 degree days though.
Hay only made about half what it did last year, but last year's crop came out a lot later, probably hurting the yields.
I mowed most of my rough-as-hell meadows in 6th gear. Got on my cousin's big, smooth meadow. I was hurling along in 7th. I dropped back to 6th in some rough stuff and saw he was broke down, so I gave him a ride to the gate where my wife taken him over to his shop to get some shixt to fix his mower. He was riding and he's like, "why you goin' so slow?". Shixt ALL my stuff is too rough to go any faster. I think he was running in 8th all over the field. Open station tractor too. Like, a 1968 or so IH 856. Screw that old-school shixt.
You're right, about seats. I could use some more padding.
I use a blowgun with a small opening to blow out radiators in the field. Small opening, and really does a great job!
Yes Harbor Freight does have a few things worthy of owning...
I do periodically pressure wash everything, including the radiators. I just use a medium nozzle, and try to not hit it from the side. Not bent any fins.
Those air ride seats are worth their weight in gold! All three of my machines have an air ride seat.
And a stereo. Used to not listen to anything but the machinery, but have found out that I can listen to talk radio with it drowning out what I need to hear. Music does drown out too much... So I ride around listening to Rush...
You guys,
riddle me this one Batman.
They've been making tractors for how long now? And you folks been cutting hay and alfalfa for how long now? And having to stop to clean off the radiator/A/C condensor for how long now?
Don'tcha think they could have figured out a way for you to do at least a half days work without risking the engine overheating?
But, maybe that's their plan?
Just brainstorming here, Sam et al.
They've had them on combines since the early 70s at least. Think some swathers run them too
Jag, today was one the easiest 'work' days of the year.
Sit on your ass all day.
And yes the A/C works great.
Blew the radiator out with the pressure washer(again) before we left the riverbottom and engine temp gauge didn't hit 180F all day.
Rough in places though.
Could use a softer seat.
I use the air compressor to blow the radiator out because I'm afraid of bending the fins with a pressure washer. Mine needs it...AGAIN. Takes about five minutes for it to get about plugged up again. The a/c did work pretty good this year though. Only got uncomfortable in the cab a few times. Then again I think its only reached 100 maybe a couple of times. Lots of 95 degree days though.
Hay only made about half what it did last year, but last year's crop came out a lot later, probably hurting the yields.
I mowed most of my rough-as-hell meadows in 6th gear. Got on my cousin's big, smooth meadow. I was hurling along in 7th. I dropped back to 6th in some rough stuff and saw he was broke down, so I gave him a ride to the gate where my wife taken him over to his shop to get some shixt to fix his mower. He was riding and he's like, "why you goin' so slow?". Shixt ALL my stuff is too rough to go any faster. I think he was running in 8th all over the field. Open station tractor too. Like, a 1968 or so IH 856. Screw that old-school shixt.
You're right, about seats. I could use some more padding.
I use a blowgun with a small opening to blow out radiators in the field. Small opening, and really does a great job!
Yes Harbor Freight does have a few things worthy of owning...
I do periodically pressure wash everything, including the radiators. I just use a medium nozzle, and try to not hit it from the side. Not bent any fins.
Those air ride seats are worth their weight in gold! All three of my machines have an air ride seat.
And a stereo. Used to not listen to anything but the machinery, but have found out that I can listen to talk radio with it drowning out what I need to hear. Music does drown out too much... So I ride around listening to Rush...
You guys,
riddle me this one Batman.
They've been making tractors for how long now? And you folks been cutting hay and alfalfa for how long now? And having to stop to clean off the radiator/A/C condensor for how long now?
Don'tcha think they could have figured out a way for you to do at least a half days work without risking the engine overheating?
But, maybe that's their plan?
Just brainstorming here, Sam et al.
They've had them on combines since the early 70s at least. Think some swathers run them too
What have they had on combines and swathers since the early 70's?
Something to keep chaff and crap off the radiator fins? So a person can keep working without stopping the machine to clean stuff up?
Drives my wife nuts, but I can drive halfway across the country without using the radio in the car/truck. I listen to engine noise, tire noise, etc., and it lets me know how the vehicle is doing on the trip. I wanna know if I run over a nail or screw or whathaveyou, and I want to know how the engine is doing.
Granted, it's not too important, really, as our vehicles are newer and very well maintained, but it makes me feel better. On our last trip, in fact, I was able to figure out that I'd ran over a nail and got it in my tire, and get it fixed before it became an issue (the tickticktick gave it away, and I caught it inside of 50 yards).
The wife actually drove down the highway with a shredded tire she didn't know about because her radio was too flippin' loud, but that was when we were first married, and I've tried to cure her of that.
Drives my wife nuts, but I can drive halfway across the country without using the radio in the car/truck. I listen to engine noise, tire noise, etc., and it lets me know how the vehicle is doing on the trip. I wanna know if I run over a nail or screw or whathaveyou, and I want to know how the engine is doing.
Granted, it's not too important, really, as our vehicles are newer and very well maintained, but it makes me feel better. On our last trip, in fact, I was able to figure out that I'd ran over a nail and got it in my tire, and get it fixed before it became an issue (the tickticktick gave it away, and I caught it inside of 50 yards).
The wife actually drove down the highway with a shredded tire she didn't know about because her radio was too flippin' loud, but that was when we were first married, and I've tried to cure her of that.
I had a sheetrock screw in a tire on one of my trucks for 30k miles. Didn't leak. Held until the tire wore out.
Screen with really small holes and a rotating brush.
Cool, do they work?
We had things like that for water intake screens, keep the algae and trash from stopping flow.
Yup
Yeah, those work pretty well.
My old tractor I traded off on my new one was bad about overheating. Small fins on the radiator plugged up within a couple hours, and the temp gauge would start rising... Stop, fire up the compressor, and blow it all out... Good for another couple hours.
My new tractor though, has much more space in fins of the radiator, and runs absolutely cool. I just blow it out once a month or so. It also has front screens that slide out, and you knock the obstructions off on a tire, and slide them back in.
thanks for that info. Not that I'll ever be in the market for something that does that type of work on a scale big enough to overheat.
It's just nice to know the mfgs are actually using modern technology at times.
Probably adds $10K to the price of a new rig though
My new CTL has a HUGE radiator, and doesn't plug up easily, but operating in dusty, dirty conditions, it needs blown out too. Air filter, and inside a/c filter too. Amazing how much dust gets sucked in.
The coolant isn't standard antifreeze though. It's the new OAT coolant. Great... more product to have to carry around. OAT coolant, DEF fluid, hydraulic fluid,... My pickup is just a rolling toolbox and fuel station.
Yeah, I was amazed the 35 year old MF with the shuttle transmission states 10w motor oil meeting xyz mil spec, but it wants hydraulic fluid meeting abc mil specs in the transmission.
Fortunately, there's some multi use fluids out there now that meet all the specs.
I seem to remember the old Case 480 and 480B backhoes my friend owned used diesel and hydraulic fluid. None of this new stuff needed. Five gallon milk cans of each kept in the truck in reserve.
Where's the turkey vultures this year? In my area, haven't seen a single one from mid-March to now. I don't think that is normal.
Funny, eh? Normally they fly on by during the migration up to the mountains or you folks. Hardly ever see on in summertime here. This year is different. Many of them hanging around the sagebrush areas this year.
These two were resting after eating on the fox I shot the other night:
They apparently are like vultures everywhere. They went after the tasty bits first (the guts). Cell phone pics the best I could do yesterday.
When I lived in Odessa I was known as the W.D.M.Bell, of the permian basin, for my rabbit killing skills with small bore rifles and hand guns as small the 22 short , and most of this hunting was done under the cover of darkness !
The "D" was for danger !
My good friend ,George Thorogood wrote, "bad to the bone" for the sound track of my rabbit hunting adventures !
Campfire pals, please ponder, discuss and add your own introspective observations.
Around here you can actually see the other side of most all fields. Might be a half mile, but dang you can see trees or a fencerow on the other end. Sam, how much time between turns with that thing?
Yes, Whitetail jackrabbits are big enough to leg rassle a logger!
Turn white in da winter. Look like a big ass blacktail one with a lighter tail now. We have a gaggle of them here. Our beagle will have her a challenge.
I was walking out to make a coyote stand just north of Vernal, Ut. in late October and spotted the biggest rabbit I have ever seen in this country. I shot it w/ 55gr Vmax. I took a picture of it w/ my rifle next to it for scale. When I looked it up I leaned about White tail Jacks. Our Blacktails here are less than 1/2 the size of that one and they are pretty big. It was infested w/ fleas which is common w/ the coyotes in that region but rare here in Nevada.
If you got a healthy one it would make a big meal.
I was walking out to make a coyote stand just north of Vernal, Ut. in late October and spotted the biggest rabbit I have ever seen in this country. I shot it w/ 55gr Vmax. I took a picture of it w/ my rifle next to it for scale. When I looked it up I leaned about White tail Jacks. Our Blacktails here are less than 1/2 the size of that one and they are pretty big. It was infested w/ fleas which is common w/ the coyotes in that region but rare here in Nevada.
If you got a healthy one it would make a big meal.
mike r
My Dad's family lived on jackrabbits during the Depression. Now there ain't any to be found hereabouts.
I was walking out to make a coyote stand just north of Vernal, Ut. in late October and spotted the biggest rabbit I have ever seen in this country. I shot it w/ 55gr Vmax. I took a picture of it w/ my rifle next to it for scale. When I looked it up I leaned about White tail Jacks. Our Blacktails here are less than 1/2 the size of that one and they are pretty big. It was infested w/ fleas which is common w/ the coyotes in that region but rare here in Nevada.
If you got a healthy one it would make a big meal.
mike r
My Dad's family lived on jackrabbits during the Depression. Now there ain't any to be found hereabouts.
When I was a kid, we would constantly have them loping ahead of us when we were hunting pheasants; then one morning we woke up and they had all packed up and left.
thanks for that info. Not that I'll ever be in the market for something that does that type of work on a scale big enough to overheat.
It's just nice to know the mfgs are actually using modern technology at times.
Probably adds $10K to the price of a new rig though
My new CTL has a HUGE radiator, and doesn't plug up easily, but operating in dusty, dirty conditions, it needs blown out too. Air filter, and inside a/c filter too. Amazing how much dust gets sucked in.
The coolant isn't standard antifreeze though. It's the new OAT coolant. Great... more product to have to carry around. OAT coolant, DEF fluid, hydraulic fluid,... My pickup is just a rolling toolbox and fuel station.
Man, that's a nice machine. I haven't blown out my a/c filters this year. So far, so good. First field I was ready to roll on and the boy reminded me after I was already set to go. F u c k it. So it blew cold and I never bothered. They're gonna need it bad.
Campfire pals, please ponder, discuss and add your own introspective observations.
Around here you can actually see the other side of most all fields. Might be a half mile, but dang you can see trees or a fencerow on the other end. Sam, how much time between turns with that thing?
Mathsr,
there's a reason they call it Big Sky Country on their license plates.
Some places in the West , the horizon is so far away you can't see it.
I was walking out to make a coyote stand just north of Vernal, Ut. in late October and spotted the biggest rabbit I have ever seen in this country. I shot it w/ 55gr Vmax. I took a picture of it w/ my rifle next to it for scale. When I looked it up I leaned about White tail Jacks. Our Blacktails here are less than 1/2 the size of that one and they are pretty big. It was infested w/ fleas which is common w/ the coyotes in that region but rare here in Nevada.
If you got a healthy one it would make a big meal.
mike r
My Dad's family lived on jackrabbits during the Depression. Now there ain't any to be found hereabouts.
When I was a kid, we would constantly have them loping ahead of us when we were hunting pheasants; then one morning we woke up and they had all packed up and left.
Both Jacks and Cottontail populations vary a lot here from year to year but there are always coyotes, strange.
Geno, I have seen Whitetail jackrabbits down off OR140 about at the NV line. In the winter I expected to see a lynx, alas I saw a bobcat....
Our jacks are in a down year. I sure hope they come back.
I felt really bad as I had a suicide jack get under the front bumper about a mile from the house the other evening. I'm pretty sure it was a female of course, probably full of young ready to hatch. Just might luck you know, waiting for the population to rebound and I put a dent in it.
Going to keep my eyes out for the whitetail variety. Might have to do a scouting trip up to the corner of the State up past Ft Bidwell.
Valsdad, I heard that! I've made a few trips out there hunting and doing a drive around and I always felt like I was sitting right in the middle of a big plate. I couldn't wait to get back into some woods!
Valsdad, I heard that! I've made a few trips out there hunting and doing a drive around and I always felt like I was sitting right in the middle of a big plate. I couldn't wait to get back into some woods!
Come visit the Redwoods, or the Olympic National Park.....................
you'll find that woods take on a whole different meaning than the ones in Georgia too.
And we have this thing some folks call The Ditch..........................it's a pretty definitive example of a canyon.
And there ain't no valley low enough.................to beat the Death Valley.
The West is pretty incredible. We have real mountains, some who's foothills start higher than the tallest mountains on the E Coast.
But we're humble folks and don't brag on it much..
Campfire pals, please ponder, discuss and add your own introspective observations.
Around here you can actually see the other side of most all fields. Might be a half mile, but dang you can see trees or a fencerow on the other end. Sam, how much time between turns with that thing?
Mathsr, that stretch is a mile long. Probably about 10 minutes per run. But when swathing a field that long I'll split in half. That way if you do happen to start a fire you have a much better chance of catching it soon enough to possibly put it out.
In the vid I was driving back to the middle to cut out a coulee and square the field back up.
Go over to the side of that hay field, grab you up some sagebrush, free and better smelling than the pine trees and outside of maybe some allergies, not as likely to poison a person as them dang "air fresheners".
The sage is organical like, loses its stink, toss it out on the ground. Pick a new piece.
Don't like sage? Lots of options. Juniper branch, pine bough. cedar works really good too, they even use it in chests of drawers I hear.
I use the air compressor to blow the radiator out because I'm afraid of bending the fins with a pressure washer. Mine needs it...AGAIN. Takes about five minutes for it to get about plugged up again. The a/c did work pretty good this year though. Only got uncomfortable in the cab a few times. Then again I think its only reached 100 maybe a couple of times. Lots of 95 degree days though.
Hay only made about half what it did last year, but last year's crop came out a lot later, probably hurting the yields.
I mowed most of my rough-as-hell meadows in 6th gear. Got on my cousin's big, smooth meadow. I was hurling along in 7th. I dropped back to 6th in some rough stuff and saw he was broke down, so I gave him a ride to the gate where my wife taken him over to his shop to get some shixt to fix his mower. He was riding and he's like, "why you goin' so slow?". Shixt ALL my stuff is too rough to go any faster. I think he was running in 8th all over the field. Open station tractor too. Like, a 1968 or so IH 856. Screw that old-school shixt.
You're right, about seats. I could use some more padding.
Ethan, sorry I'm just going back through this thread.
I use the medium tip(green?) with the pressure washer. The engine radiator is stiff enough that the fins will not bend even if you hit it at an angle. But the hydraulic fins are those skinny little fuuckers and will bend pretty easy so I am careful and hit them straight on only.
Out in the field I just use air but sometimes you need to blast out the nasty build-up with water.