Might could use some help.

I don’t have exact measurements on either.

Asking for a friend

Would this shredder deck (a five footer)


[/url]



Fit into this pick up

Wy fugh ya,... here hold this beer

Might want to measure.

Even of it has to sit “kitty corner” or wtf ever, truck boy said he dont give a fugg

😃😃

Jfc.....
No.....
It aint gonna got into that tar baby's bed....

But it will go into my "woods stealth panzer we are rolling past you in your ill located tree stand outta the blue" bed of my truck.
With a couple of blankets to pad it.....

We need ta work out a dove plot with that mofo.

Not have ta deal with dipschits on Twra public feilds.

^^^^^^^^^^
Tar Baby.......
LOL!!!

Well this is not about us

This is for a friend

I would never ask such a ridiculous question for my own behalf

Sweet tar baby by the way

If it's less than 100 miles, I'd just tow it behind the truck.

Your friend needs to buy a tape measure and at least rent some common sense.

You need better friends.

The truck?

A hall pass for drivin through the section? Turn the base way up & the bruthas wont even notice yer cracker ass inside.

Well, unless your playing that chic you talk about.

It’s dark

And all he has a yard stick

🤣

That deck is 300 miles away


Long distance friend

Well, then it sounds like you just need a beer.

(You can't say "hold my beer and watch this" without a beer)

Inside box width is 57"

Tailgate up inside is 71"

Cool

Now we getting somewhere.


So this deck will have to set up on one bed rail. That’s what I was thinking.

Probably rub on his fancy paint job.



Got a hunch this thing is 62” wide. Or more.

The other party is hard to get info out of

Thread is absolute bullschitt.

Slummy got a friend? No way, Jose

I don't think you wanna do that.

Usta have have 3 or 4 that I built a home made tonneau cover for. It's still leaning against the wall in the garage.

Had to put on my coat and boots, find a tape, etc.

Cost ya a handful of Cheetos......

Put a couple railroad ties across the bedrails and then set the brush hog on top of them. Might want to put an old towel or rag u see the ties. Be sure to hook the $3 harbor freight ratchet strap to the lip in the fender when you cinch her down.

I approve of this plan.

Couple of 4X4's, and 4 C-clamps
Long as you're not too wide, tie it on top and go! (mimic the Beverly Hillbillies)

I brought a 5' disc and a 16" Dearborn plow home in the back of my F150,...lifted 'em out with a boom on my tractor.

But my F150 isn't pretty. A few more scratches just blend in with the rest.

So yeah. You can haul that brush hog home in that pick up. It's going to need a quart or two of touch up paint afterwards if the owner is particular about cosmetics.

Yessir, certainly.

Get the tractor and road it during rush hour.

Easy need a 3/4 " rope back truck up to front of brush hog Thats end driveshaft sticks out. Drop tailgate .run rope under tailgate equral amounts to both sides,.,.end of ropes up to and over tailgate sides.,.put hog on a pair of 6 x6,s or get about 6 to 8 in off ground..run rope over top of tailgate down to pins on hog tie nice and tight take out blocks drive away .,.,remember flap tire on back of hog only likes to go about 6 mph

And burn up the wheel bearings in it at speeds it was not designed for???

lol

Aint no wheel bearing in them rigs

Rub on my factory paint job???
Its bed lined inside the frighing thing.
And I allow coop and magnus to get up on my truck to pat em .
Jesus christ...
Its a shortbed reg cab 4wd pick your way thru the woods truck.
Fugging truck...
Not a fugging show peice....

LOL!!!!

Tell momo,s at mahindra place to get 4 or 5 guys.
Line fugging bed with a couple of blanlets and some card board on floor so it can slide where it is gonna lay down into slanted.
Drop fugging tail gate.
Me and momo,s lift and load.
Strap fugging thing down to hooks in bed.
See if tailgate shuts.
Yes or no....

Tell momo,s thanks and head north back to Tn.


JFC we sent c h i mp s into space in the 60,s.

This aint a mars lander mission.





LOL!!!


Shoulda got it today....

When we going????
Monday?????

Whats that one wheel on it???

Just a clearance adjuster one or some schit....

First of all . . . . . . . .that ain't a truck.

It will probably be one momo with a set of loader forks

Try not to get our hands or fingers under 600 lbs of deck and c-channel steel

Tar Baby......


LOL!!!

One word: trailer

Daddy come off the oil rigs and bought Lil Biff that for graduation.

It’s just for cruisin chicks and goin to Sonic

Got 3 trailers and f250

Don’t want to do that





Tar Baby needs a road trip

Has new red brake calipers and speakers that go boom

Harbor freight is always selling them good movin' blankets, like what we used to have to steal, for something like $7.99.

Get the weed hog home, just give them blankets to the pooches. Cover up that nasty assed couch of there's so you don't embarrass them when you post pics.

Why even try some sh*t like that ?
Borrow or rent a proper trailer and chain
the em effer down for the trip and roll on

First time you have to slam on the brakes
with it rigged in the back of the truck it's gone.

Renting a trailer is way cheaper than an attorneys
fee would be to get you out of jail for letting that
heavy blankety blanking thing fly through
somebody's windshield. Last one I went and
picked up was only about an hour away, but
there were no problems because it was
secured to the trailer with chains, and I didn't
lose it and get sued and have to pay shaniqua
for killing one of her 6 welfare beebees

Good Luck

Finally.
Someone with common sense!!!!

Rufus . . . . . . .lol

Ratchet straps and bracing, and cushioning.
Counter opposing tied down.
In da bed.



Be GTG....

Define "into" ....

One doesn't get to hold the Beaver10 Awards "Smartest Man on the Campfire" title without a little of that stuff ya' know.

Do not know about "in it". But it will fit on it.

Lay four 2x4s across the bed rails. Screw 2x4s down along the right and left sides to build a pallet. Screw 2x4 #s 7 & 8 on edge so they lay against front of bed and tail gate to prevent pallet moving forward and back.

Lay furniture blankets between pallet and painted bed surfaces. Set shredder deck on top of pallet. Anchor firmly with ratchet straps. Haul as many hundred miles as needed without putting a scratch on that pretty baby pickup.

The rest of us would have appreciated it. 😁

Lives at home
30 yrs old
Daddy got him a job with the city after a summer off from graduating high school.
Pay check is fun money.
Mommy pretreats his poo poo undies.....

👍👍👍

Niqua mass casualty event.

Laying slanted 3/4 ths of it or more in bed.

LOL

“Pretreats” ???

💩

You started this schit on purpose.

Knowing everyone would chime in ...
LOL!!!

The important thing is:

There is a good BBQ place I know of down there.

Full size PU is 48" between the wheel wells so sure it's gonna be on a tilt. Bring some ratchet straps.

But you knew this already.

👍👍👍

Well you screwed it up and jumped out of character

It was supposed to be **asking for a friend**

You could do that, and it'd work, but you won't have any paint left on the bedrails when you get home. Matter of fact, there's about a hundred ways you could haul that bush hog in the truck bed but none of them involve not [bleep] up the paint job on that silly mexican cruiser truck.

Or he could borrow a 5x8 utility trailer of which every self respecting redneck within a three state radius of Tennessee has at least one to haul his 4 wheeler. Lay a 4x4 across the side rails near the front and another farther back, set the bush hog on top of it and ratchet strap the heck out of it. Pull said trailer home while listening to obnoxious boom boom music and eating 7 eleven taquitos.

P.S. The tailwheel does have bearings in it (remember to keep them greased), but pulling it home on the tailwheel for 100 miles at highway speeds ranks up there as one of the dumbest ideas ever.

If he will simply hook it to the front bumper, he can see and watch it all the way home. After all, it does have a wheel it can ride on.

That is what the furniture blankets are for. Or foam pads. Pool noodles work.

^ ^ ^

The 2 shredders I have use bushings in
the tail wheels. The composite tire
(made out of pieces of laminated rubber
like 85-90 % of the smaller shredder tail wheels)
likely wouldn't make it very far at paved
road speeds.
Now, most of the bigger shredders, what
everyone calls a batwing, can be road
towed to a degree. Most have bearings and
proper pneumatic tires. I sure wouldn't want
to road tow one over 10 miles either way.

Don't renegade have a connect on the base with access to a helicopter?

why you wanna risk scratchin' up that fine lookin' street rod?

Aint my truck


lol

You didn't get that thing for Baby Huey, didja?

Got a 5x8

A 14x5

And a 20 footer




Don’t want to haul a trailer out on the interstate. Don’t have ‘tags’ on my trailers and had a thing with highway patrol about that.




Then I got a topper on my Super Duty


a few considerations

I don’t want to haul a trailer from the Ky state line to Huntsville Ala for this as stated. I’m GTG around town and no law dogs hassle me locally.




Maybe I misspoke on those tail wheels having bearings. Not sure about this new rig.

Our King Cutter set up on our Kubota is set up with bushings like this one.


Oh btw, cmon, someone else suggested the absurd notion of hauling it down the highly in jest. At least I hope they did.

https://www.brokentractor.com/p/king-kutter-rotary-cutter-tail-wheel-hub-191100-191100/

No, just a pic used for references

Still a single cab Colorado, just didnt have a ready pic of the exact pickup in question.

Will it fit???.....Come on MAN!!!




You must mean..how much paint will I lose?......grin

Drop that thing from 7' up and it'll form it's own little saddle to ride in all the way home. Hell you probably wouldn't even need to strap it in. Thank me later.

Stand it up on edge and strap the crap out of it..............................

Give your friend a tape measure and instructions on how to use it, if you know how.

Really stressing my paint job!!!
LOL!!!

Hell that thing has plastic on the bedrails. Toss that bad boy in the back however it’ll go and hit the road, keep an eye peeled for gun shops and estate sales on the way. No sweat.

the color would be a good match, I say go for it.....

You can't expect anyone to make an educated decision without having all the facts up front.

Slummy,

you are getting to be almost as good a fisherman as Spanky.

I can't tell if you hooked Renny as collateral damage, or he is being your straight man.

Sycamore

On top of the bed rails... let it overhang equally on both sides.

Didn't read the whole thread...

Maybe a Slum spoof? Who knows and who cares.

Zactly....
Sprayed in liner.
Couple blankets for GP padding up towards the cab and maybe 2 6ft long 2x4,s under it slanted
Leaned over passenger side.
With 3/4 ths of it COG in the bed.
Ratchet strapped counter opposing down.
Maybe tailgate down....
And a 2x4 across the rear of the bed inside the columns as a stop.


Then Im gonna find a scratch amongst the 100,s that already exist.
And make slumlord pay for a shiney new Macco paintjob.

LOL!!!


And gun shop stops are mandatory on the way back.

Whos gayazz truck is that?

This douche has me on ignore

He’s been caught peeking.


Can’t take the heat on other occasions, outs himself on a gut-hook thread

LOL

If that is Rene's truck, I take back the "squats to pee" comment.

Utmost respect to Rene, no matter the gayness of his ride. Thankyou Sir, for your service.

You guys are hurting my feelers about my gay azz truck...


Gonna take my kickball and go home now...


LOL!!!

With those flames on the side of the truck there's no way it wouldn't fit. Especially if you get enough running jump with the forklift or loader.

Toggle snipers
God love em......

LOL!!!

If you own that truck it seems you would have no use for a brush cutter. Good grief.