Waiting on Glock parts.
Killing me ....
USPS.......
Arrgh....


Get my UPS delivered stuff in the morning at the main hub on hold for pick up in person.
Then I got about 3 or 4 hours tomorrow of trigger disassembly, polishing parts, and reassembly.
Factory setting this trigger is 5.25 pds.
Hoping to get it down to 4.50 maybe a hair above 4.25.
Install a Dawson adjustable tritium night sight.
Only mod I'm gonna do is clip 1.5 coil off the firing pin plunger spring.
I aint buying a spring kit just for a reduced power one.
All too easy to DIY.
Tommorow will be a enjoyable day.

Fugg paying a " smithy" for the same exact work and methods you can do yourself....
" Smithy,s" over rate their basic work skill to customers/ the gullible at times around here.
Most schit they do aint working on a mars rover.
Anyone with basic mechanical common sense and a good selection of hand tools can do this work.

Going OEM on the springs and connector minus the 1.5 clipped coil.
See how much improvement can be done versus mcarbo, apex, wolff, and ghost aftermarket stuff.

You making one of those super deadly Ghost guns?

Which model Glock are you working on?

They are super easy to completely take apart and work on. After putting an Apex trigger in my M&P 2.0 5" doing a trigger job/swap on a Glock is stupid easy.

Scope base took 2 weeks to show up.
Place ordered from didnt even ship it til a week had gone by.

Got my Wilson 1911 thumb safety Sat. Ran out of time to install this weekend.

I need a week of tiddies n beer, then a week to do gun chit.
Never did zero my reflex on turkey gun. Used backup gun the two times I got out. Wasted two morning i could have slept in.

Gun projects are more PITA than fun anymore.
Am sick of messing w old fugged up chit.

May abandon the #3 project and part it out.

G17 gen 5

Simple parts I couldn't find around here and had ta order from Pearce.

You can't be as cool as stick if you don't arrange it all pretty for pictures and call it "wares that exist."

Smell his or her finger when they arrive and report back . LMAO

Lol!!!

Nope ..

Just some basic friction mitigation stuff on trigger components to lessen up poundage.

BTDT before on other Glocks, S&W,s, CZ,s
Ect ect ect.
Usually can get 1 to 1.25 off em doing a indepth polish job.

Done spring kits also.
1.5 to 2 you can usually get off em tied in with a indepth polishing.

Was looking at a ghost 3.5 edge connector to address slight overtravel.

Always an option .
Just wanna see what I can get the pistol down too OEM.
And doing the spring clip on the plunger.

Wait one ....
LOL!!!

Not Big Stick quality.
And no salmon either...

Yep, lots of tuning on Tupperware is swapping stuff and fooling with different/modified springs.

The 1911 not so much. Good tools and some knowledge to get good safe triggers.

Old chit vs new.

I enjoy getting decent 1911's cheap (or used to, before half the world went to chit) because somebody took it to a "smith" for trigger or reliability work and got it back in worse shape than it was to start with.

There are gun smiths and then there are gun plumbers. In my experience most really good smiths are excellent machinists.

Have fun!

Quick, throw something in the creek and we'll call it good

😂

Pics tomorrow or it didn’t happen.

No pistol will ever measure up to The 1911 .45 Rem Rand I was assigned at Carson as a 60 gunner.
Didnt have pop up e types where a hit counted and knocked it down.
Old paper tgts at 25 yds.
I shot 280 to 290,s regularly and a 300 twice qualifying with that pistol.
POA/POI dead on hold was money for me with it.
Fresh bushing in it.

Then we got the M9,s in germany.....
Sloppiest damm pistol ever IMO.
Figure out POA to POI for just about every one of em.
You was blessed if ya had one that was GTG...
The army had ta send back 10,s of 1000,s of em.
Cracked receiver faces around the firing pin holes.

Pics or it never happened👍👍👍👍👍

"Neither is there salvation in any other: for there is none other name under heaven given among men, whereby we must be saved."

"Thou shalt not take the name of the LORD thy God in vain; for the LORD will not hold him guiltless that taketh his name in vain."

You guys aught to consider and take heed of the signature while there's opportunity.

Nawwwwww....
I take care of my gear.

I'm sure you and many others do also.


Let people on vids torture test gear that get paid for it with sponsered gear.

So the rest of us can be informed consumers.

👍👍👍👍👍👍👍

Thanks HC.
🤗🤗🤗
JC aint God though.....

Send it to gopher gunner’s boy. He does some “smithey work”

And there he is.... the turd in the middle of the sidewalk.

I am concerned about you and the others'.
You'll spend forever somewhere. It can be in heaven IF your trust is in the true Christ.

"And we know that the Son of God is come, and hath given us an understanding, that we may know him that is true, and we are in him that is true, even in his Son Jesus Christ. This is the true God, and eternal life."
I John 5:20, 7


Jesus is the Word. God is the Father, God is the Word, and God is the Holy Spirit. However, the Father is not the Word and is not the Holy Ghost...

" For there are three that bear record in heaven, the Father, the Word, and the Holy Ghost: and these three are one."

1x1x1=1 God, 3 Persons

John 10:32...
"Jesus answered them, Many good works have I shewed you from my Father; for which of those works do ye stone me?
The Jews answered him, saying, For a good work we stone thee not; but for blasphemy; and because that thou, being a man, makest thyself God."

Both The Man and The God Almighty


"Then saith he to Thomas, Reach hither thy finger, and behold my hands; and reach hither thy hand, and thrust it into my side: and be not faithless, but believing.28
And Thomas answered and said unto him, My Lord and my God.
Jesus saith unto him, Thomas, because thou hast seen me, thou hast believed: blessed are they that have not seen, and yet have believed.
And many other signs truly did Jesus in the presence of his disciples, which are not written in this book:
But these are written, that ye might believe that Jesus is the Christ, the Son of God; and that believing ye might have life through his name."
John 20

See Signature Links

Marking out name and address didn’t help much. I got your tracking label and went straight to your name and address. You might want to be careful with important things!

Lol!!!

I got the booklet and paper work for your VXR scope in the mail also.

You coming into town tommorow?
Toss that old 2032 battery and get a energizer for it man.

Thank you.
Will remember that from here on out.👍👍👍

Thank you HC.

Just trying to watch out for fellow members! Folks will do anything now days!

Ever heard of PM’s?

OEM Glock mag floorplates.



Pearce extension plates.
Better fit.
Cleaner look.
Better pinky purchase w/ non dominant hand.👍👍👍👍👍

How do you know I aint?

My bad I thought about it after the fact!

He probably doesn’t GAF. Lol

I like visitors and new magazine subscriptions.


LOL!!!

You're welcome Renegade.
Hope it all works out for you.

Good, take a video when the Jehovah’s Witness show up.

Oh, and them fughing glock mag floorplates are still a PITA to take off after all these years.
Squeezing in the sides of those mags to free up those tabs on each side and manipulating the detent at the same time and sliding it off.....

🥴🥴🥴🥴🥴🤬🤬🤬🤬🤬🤬🤪🤪🤪🤪🤪😄😄😄😄😄

LOL!!!

Let em go thru their whole 9 yards......

Then tell em if I turn I burn, cause I'm Catholic and some pope back when and the powers that be back then made it that way for benjamins and job security.

Yep I just went through that Friday with my daughters little 42 Glock so she could get a better grip. PITA

I thought this was a post about mail order Glock parts.

Started that way.

More coming in tommorow morning.
Then I need ta get jiggy wid it....

Going to give blood in the morning.

Might try to meet up around 10 ish

Was outside running the chainsaw when u called earlier. Charolais cows been out today too. Good times.

👍👍👍👍👍
Morning ammo buying run.
UPS to pick up parts.
Should be at the house by 945 at the latest.