The roaches eat it all off if I use bacon grease
3 in 1 or something better? What do you all use?
3 in 1
Just like your Ga Ga Pee Pap used to use.
Kroil.
“Don’t spoil it, kroil it”
When i worked 3rd shift at the brake pad plant, it’s all we used.
“Break, bruise or bleed” it’ll come apart.
I hear Door-Ease stick lubricant works good. Other suggestion would be chain lube sprays that don't attract dust.
Hinge maintenance is important. Otherwise you could become un-hinged.
Pop always used the 3 in 1.
Maybe some WD-40 if the 3M stuff was runnin' low.
Or maybe the oiler with the used 30 wt in it.
I like the 3 n 1 dry lube for door hinges, it works as good as the org and dont make a mess.
I like to leave 'em dry and squeaky. Makes it harder for the wife to sneak up on me. I welded a little bell to the cast iron skillets too.
Thank me later.
Rem-Oil with teflon. One good spray & done for better than 10 years so far.
Pop always used the 3 in 1.
Maybe some WD-40 if the 3M stuff was runnin' low.
Or maybe the oiler with the used 30 wt in it.
Nah. Campfire wisdom…
Gotta go down the Henry’s hardware.
Get 1 gallon of kerosene
Get 1 gallon of automagic transmission fluid.
Get 1 gallon of 0-20w Japanese engine oil.
Get a bottle of peppermint oil.
Mix it all into a concoction. Use it to save $3.97 on a bottle of url.
#stickingtottheman
I use 3 in 1 on my pig gates
Bar soap. Thank me later.
Bought 7K gallons of 3 in 1 just before Clinton's second term.
Anybody that didn't is an idiot.
PS-Your're on ignore.
Pop always used the 3 in 1.
Maybe some WD-40 if the 3M stuff was runnin' low.
Or maybe the oiler with the used 30 wt in it.
Nah. Campfire wisdom…
Gotta go down the Henry’s hardware.
Get 1 gallon of kerosene
Get 1 gallon of automagic transmission fluid.
Get 1 gallon of 0-20w Japanese engine oil.
Get a bottle of peppermint oil.
Mix it all into a concoction. Use it to save $3.97 on a bottle of url.
#stickingtottheman
lolol
Pop always used the 3 in 1.
Maybe some WD-40 if the 3M stuff was runnin' low.
Or maybe the oiler with the used 30 wt in it.
Nah. Campfire wisdom…
Gotta go down the Henry’s hardware.
Get 1 gallon of kerosene
Get 1 gallon of automagic transmission fluid.
Get 1 gallon of 0-20w Japanese engine oil.
Get a bottle of peppermint oil.
Mix it all into a concoction. Use it to save $3.97 on a bottle of url.
#stickingtottheman
lolol
+1
The Man DOES NOT get over on BigDave !!!!!!!!!!!!!!!
Pop always used the 3 in 1.
Maybe some WD-40 if the 3M stuff was runnin' low.
Or maybe the oiler with the used 30 wt in it.
Nah. Campfire wisdom…
Gotta go down the Henry’s hardware.
Get 1 gallon of kerosene
Get 1 gallon of automagic transmission fluid.
Get 1 gallon of 0-20w Japanese engine oil.
Get a bottle of peppermint oil.
Mix it all into a concoction. Use it to save $3.97 on a bottle of url.
#stickingtottheman
lolol
+1
The Man DOES NOT get over on BigDave !!!!!!!!!!!!!!!
Sorry for the double post
Sorry for the double post
Don't nobody use the old petroleum jelly no more?
Sperm Oil, ya can make yer own!
Kroil.
“Don’t spoil it, kroil it”
When i worked 3rd shift at the brake pad plant, it’s all we used.
“Break, bruise or bleed” it’ll come apart.
When in doubt, Kroil. I use it on hinges and everything else. For an oil to work, it has to get in between the surfaces whose contact you wan to lubricate. Kroil does.
chain lube sprays that don't attract dust.
I always wonder where this kind of thinking comes from when I've read it about gun lube.
What lube "attracts" dust?
I only use the best top tier Euro Oil.
Decant it in a Schott glass.
My wife can tell when I've lubed the hinges,
Kalaus she will holler, "Ziess door is working gudt now.
yesterday I [bleep] bendered my fingernail when me opted to open zit".
That, or I hit it with some oil.
Zoom is easy. Food grade spray. Some synthetic stuff with a needle
applicator a salsman gave me.
Astroglide might work for some here.
chain lube sprays that don't attract dust.
I always wonder where this kind of thinking comes from when I've read it about gun lube.
What lube "attracts" dust?Voluptuous Lube?
The roaches eat it all off if I use bacon grease
3 in 1 or something better? What do you all use?
Smegma....When I can get some from Flave’s mom.
🦫
Remoil.
Maybe not the best but its what i have lots of so good nuff.
Indoors only though.
silicone spray. It may be years before you need to treat them again.
Oil from the SPR if you don't mind it refined in China.
Why oil your hinges? They squeak you'll know when the NWO boogie men are sneaking into implant a microchip in you ass or a stealth covid vaccine while you be sleeping.
Q never oils his hinges.
Another top choice if I don't have Kroil handy.
WURTH... HS-2000... Goes in as a thin liquid solvent, Turns into a sticky Super Lube that stays put... It's German!... Best Shyt in the Vorld!
The roaches eat it all off if I use bacon grease
3 in 1 or something better? What do you all use?
Smegma....When I can get some from Flave’s mom.
🦫
You probably could use toe jam too, if moms is out of smeg.
Aren't hinges sposed ta squeak?
Aren't hinges sposed ta squeak?
Well............................duh.
What else could a fella be pissed at besides Shredded Wheat packaging if hinges didn't squeak?
A dab of multi purpose grease. John Deere sd polyurea cus that's what's in the shop.
I hear Door-Ease stick lubricant works good. Other suggestion would be chain lube sprays that don't attract dust.
Used it on latches and posts but not on hinges.
Hinges get whatever is handy. Truck hood and doors got some kind of silicone spray that I was using on garage door rollers the other day.
Aren't hinges sposed ta squeak?
Well............................duh.
What else could a fella be pissed at besides Shredded Wheat packaging if hinges didn't squeak?
Fake innanet preachers that don't live by the golden rule?
Yikes, them too?
I usually try to ignore them rather than getting PO's at them.
I welded a little bell to the cast iron skillets too.
With my wife that'd be the equivalent of handing out job applications in Harlem.
You could do it, but what would be the point?
You sure that was Conan? I thought it was Dutch.
Ya, those things squeal at the perfect frequency. I have just been using my gun oil because it is handy and it works great.
Take all interior doors off their hinges and install curtains in their place.
If you’ve been shooting long enough you only know the hinges squeak because your wife tells you they squeak
Garage Door Spray has always done it for me. It does squeaky office chairs as well.
3 in 1 or graphite powder
if you're not using imported scandavian whale oil for door hinges you are a f-ucken hillbilly. everybody knows that fer chrissakes.
You sure that was Conan? I thought it was Dutch.
Nine!... Conan is an Austrian!... Wurth is german... And the Dutch are too cheap to sell a quality product... lol
For barrel type hinges, pull the pins one at a time and use a q-tip and a dab of axle grease in each loop. Never touch them again. Outside I use the marine grade grease.
Osky
Frequency grease, stops all them hi pitched noises , great for ear drops too .
If the wife being nosy , take a small medicine bottle , a long single wood screw . Put bottle a foot above door jam with a hole drilled in bottom of bottle.
Get some of those party poppers , add some string , put string through hole drilled in bottle after cutting paper machet case off , put hook on door , tie string so you got just enough slack to in hook it when you want to leave building , now fill the bottle with flash powder and wait 😎
Winner winner chicken dinner!