Window Rest For Pickup - 03/06/23
I bought a Millett or some such rest that you could put on your window and place a sandbag over to shoot gophers from the truck. I lost one and haven't been able to find another one, so I decided to try and build one. By the time I had a couple made, I only had about $16.00 in materials and $150.00 in labor. It was cheaper to just buy the original, but when you can't find them, you make them.
I started with 2 inch PVC pipe and cut a slot the fuill length of the pipe...
Then I cut some thin pine lath to put in the top of the pipe for a window stop...
Then I filled the pipe with spray foam to make it solid to put a groove in it to slide on to the window and hold it in place...
Then I cut the foam with a knife to put a slot in the mount to go on the window.
Then I rolled the pipe insulation out and pinned it in a box to keep it open to apply some spray adhesive...
Then I wrapped the PVC with the insulation...
Then to the field to test it and it worked perfectly.
I started with 2 inch PVC pipe and cut a slot the fuill length of the pipe...
Then I cut some thin pine lath to put in the top of the pipe for a window stop...
Then I filled the pipe with spray foam to make it solid to put a groove in it to slide on to the window and hold it in place...
Then I cut the foam with a knife to put a slot in the mount to go on the window.
Then I rolled the pipe insulation out and pinned it in a box to keep it open to apply some spray adhesive...
Then I wrapped the PVC with the insulation...
Then to the field to test it and it worked perfectly.