Home
Posted By: Setterman TC Dimension barrel wrench - 09/14/23
I’m aware that the rifle has been discontinued. However, my plastic and steel wrench recently disintegrated in my hand. The internet search has proven fruitless. Does anyone have one or know of a source?

Any assistance will be appreciated.

Bob
Posted By: Hotrod_Lincoln Re: TC Dimension barrel wrench - 09/14/23
Got a picture, or some dimensions? Send me a PM if you do. Any "machinist" worthy of the name should be able to whittle one out pretty easily.
Posted By: Setterman Re: TC Dimension barrel wrench - 09/14/23
Hot rod, thanks for the reply. The device is actually two piece, one of which secures the action while the other turns the ring which secures or removes the barrel and headspace via a series of clicks. It’s pretty much a Rube Goldberg device, but it was effective while it was intact.

Bob
Posted By: Hotrod_Lincoln Re: TC Dimension barrel wrench - 09/14/23
I've been building my own barrel wrenches for 40+ years. Send me some pics and we can repair yours or fabricate something, I'm sure.
Posted By: Nollij Re: TC Dimension barrel wrench - 09/14/23
Setterman, I would start with [email protected]

He used to have a lot of T/C Dimension stuff and may be worth a shout.
Posted By: goalie Re: TC Dimension barrel wrench - 09/14/23
It's a torque wrench too.

I've got a Dimension and 6.5 manbun and .223 barrels.
Posted By: Setterman Re: TC Dimension barrel wrench - 09/15/23
Guys:

Thanks for the replies. Hot rod, I’ll get you a pic tomorrow.

Thanks,

Bob
© 24hourcampfire