Looking to replace the trigger on a Ruger M77 mk II. Is the Timney worth the extra money over a Riflebasix, or are they essentially the same thing?
Haven't used a Riflebasix but the Timney in my M77 MK II is superb.
And I say that generally NOT being a fan of Timney in normal M700 clone applications where I have trended towards Triggertech and Jewell for the most part.
It does however take a bit of hand fitting to get the 3pos safety working just right on the Ruger...
I have used Timney and Moyer triggers. If my understanding is correct the Rifle Basix is essentially the older more easily adjusted factory trigger.
I like the Timney it's a good hunting trigger, not sure if they have the Calvin Elite model but some compare that to a Jewel.
It appears the only options for the M77 is the Timney and RifleBasix. Most other aftermarket trigger companies focus on Rem 700 style or AR style drop ins. After some more research on the subject it appears that the Timney is the way to go. Any other info any one could provide would be much appreciated.
I have a timney in my mii, there is some fitting and grinding involved...it isn't exactly drop in. I don't know if that is required with the rifle basix since I've never installed one of those.
I would only consider a Timney if your other option is a Rifle Basix.
It appears the only options for the M77 is the Timney and RifleBasix. Most other aftermarket trigger companies focus on Rem 700 style or AR style drop ins. After some more research on the subject it appears that the Timney is the way to go. Any other info any one could provide would be much appreciated.
Add Spec-Tech to the mix. Timney,SPec-tech..................RIfle basic
Another option to consider is Dayton Traister. It's been close to 20 years since I put one in one of my MKII's, but it's still working just fine. The one I have is adjustable for pull and sear engagement, but not for overtravel. I dealt with the overtravel issue on my own. Mine's set to around 2.5 lbs and is nice and crisp, and for the price, the I couldn't ask for more.
Also, the Ruger triggers are some of the easiest out there to shape into an acceptable unit. A little surfing, a hard stone, and small bit of grinding on the trigger spring are all that's needed. About 1/2 hour of your time and one can have it where you want it. If not comfortable with such, about anyone claiming to be a smith can accomplish the task.