Not looking for a Remington expert...looking for a gunsmith. I have a Rem 700 that needs a barrel screwed on and head spaced. I have the barrel. I have a G 33-40 that needs the rear base holes welded up and re-drilled and have the repaired area re-blued. Lastly, I have a Savage 99 that needs the barrel brought into battery(about an eighth of an inch) and the rotor replaced and adjusted, Look guys, I just got out of the hospital with Covid so if you can help me please pm me, Not sure my nerves at this time can take a bunch of heckling. If not, just move on to the next thread. Thanks, powdr

Please don't recommend JKOB, he's already turned me down on the work and I understand.

Best wishes for a speedy and complete recovery.

Ahlmans?

https://www.ahlmans.com/gunsmithing.html

They’ve done some work for me, and did a very good job. They’re backed up 2-3 months now.

Jack Keister. 540-705-4431
I've had him do a good bit of work for me.
Fast turn around. Knows what he's doing

If you don't mind shipping your rifles contact "Redneck" who has numerous posts here on the campfire.