I need help finding hammer springs for a 16 double?

Any help would be appreciated.

Thanks,

Try Numrich.

There is Fox sterlingworth fourm and a Double Shotgun forum. You might serrch for them and ask there

https://www.doublegunshop.com/dgsnos3.htm

https://doublegunshop.com/forums/ubbthreads.php

Tried an Ithica spring and it worked for about 50 shots than started to fail, not enough snap to hit primers hard enough. I haven't had any luck looking for a replacement spring? Maybe a machine shop is my next search.

Try Ahlmans gun shop in MINN

https://www.ahfoxparts.com/parts.html

I attempted to call these people a couple weeks ago. Their contact page indicated that they are not presently taking orders or answering inquiries.

Wouldn’t hurt to give Wolff Gunsprings a call.

Shouldn't be a big challenge for an experienced gunsmith to make one. GD

Try Bob's gun parts. Gun-parts.com

If you measure the wire diameter, total spring lenght, coil space in the stack and how many turns on the ends....that is all that is needed to spin one up. You could even do it yourself with a drill bit, ruler and a bench grinder.

Finding a couple feet of wire is the hard part. I suggest chrome silicon as it is easy to finish.