Hello.I'm looking for the 2 screws to mount this sight.Any information on the tread size and length would be helpful or if you know where to buy them even better.
Thanks
John

Since the Lyman #54 only fits the Savage 1920, you might try the Savage Collectors' forum.

Jeff

I drilled and tapped for, and used, 6-48 screws. Had to turn heads down a bit to fit in sight base counterbores. The original Lyman screws mic at the same as 6-48, and the thread gauge confirms it, but, those screws in turn would not go in the whole way without forcing them. I wonder if Lyman supplied screws with an interference fit to prevent loosening? Like I said, I didn't want to force anything so I went with new ones for my recent Lyman 54 project.

Call Lyman. They should help you.

Don