Specifically, M70s. I know that barrels for the Rem 700 can be swapped relatively easy. How about the M70s? Does the extractor cut cause problems when installing and headspacing?
Push-feed to push-feed and control-feed to control-feed is pretty easy. The control-feed barrels have coned breech cuts, so that portion of the barrel needs to be removed to fit them to a push-feed action.
Jeff
You will probably have to recut the extractor slot and reheadspace.
Butch
Send a PM to Redneck. He's done it more than a few times...and is in your home state.
RH
I've got a long list of questions for Lee, guess I'll add it to the list.
I have a stack of pre 64 30-06 barrels if anyone is interested.