Does anyone have a tutorial or link on how to disassemble a CZ 550 American bolt and how to reassemble it. I am looking to clean the firing pin/ channel. Thanks.
I read that but was hoping for a picture, more of a visual person I guess. Thanks though.
I guess it would be reverse to put it back together?
Cock, then depress the button at left on head of bolt. Pull bolt out with button depressed. You have to release the bolt to get it all the way out. Untwist to left -- unscrews to allow cleaning. Be careful to NOT uncock!! When ready to re-assemble, screw back in and slide back into rifle. Be sure the head is in the right position -- don't jam it back in or you will scar the wood. Close the bolt and pull the trigger to be sure everything works. Cycle and work the bolt several times.
Thanks, I was able to get it disassembled. I found it did not match up exactly when reassembling the bolt. There is a quarter of a turn to have it completely screwed into the bolt handle but then it is misaligned. I got it as close as I could and placed bolt back into action and it appears to be working normal. Will this cause any problems? It seems to be good.