I have a 7mm Wea. BDL on a custom stock.. I plan to put it back into the factory stock and give it to a friend of mine. I would like to put my .25-06 into the custom stock. I assume this is possible with a new magazine box and floor plate. I thought I would check with Brownell's if this is possible with out a great deal of hassel !! Is this a good option??

Brownells carries an ADL to BDL kit that has all the parts you need to do the conversion or you can take the cheap route, buy a trigger guard and floorplate on eBay and cut the magazine box down yourself.

Or go to Pacific tool and gauge and get a steel floorplate instead of the factory pot metal.

Thanks guys for the info.

I have a magnum BDL floorplate complete setup spring, follower,screws,and box if your interested, take off

New takeoff