Anyone know what is the max velocity you can use these at?
Also do they have a website??????
I am talking pistol plated bullets
Have used some, As good as any better than most. If I remember correctly there division of Berger bullets? The gutter connection with a lot bigger firmer something and I think I loaded them the same as in the Full Metal Jacket type bullet
Don't know, but do know you can run the Rainier 124gr plated fmj-fp's to 1400 fps in a 38 Super, I just put a hundred of those together yesterday in Magtech brass for Wife practice loads in her P365's, 5gr Longshot is a nice comfortable 9MM plinking load with plated 124's.
Anyone know what is the max velocity you can use these at?
Also do they have a website??????
Depends on the gun and the cartridge
do they have a website??????
I load them just like i do hornady xtp's in my 40 and 45. They are accurate and hit hard.
No John it is not. I went there but I could not find anything on the bullets. All I found is loaded ammunition. If you see a link on there about their plated bullets about price, diameter weight etc then I am blind
Not sure if any help, but if I remember correctly him is a division of Berger
Fotis, go over to xtremebullets.com they have a chit-ton of plated bullets in stock, I wouldn't fool around and wait long though.
Punch the in-stock button and shop away.
Edited in the interest of full technicality:
They have a help line number.
They have a VIDEO stating their plated bullets can be driven to 1400 fps
They also have a chit-ton of bullets in stock in case others reading this thread may be needing some.
I think all plated bullets manufacturers will buy the cheapest lead alloy they can get, will also plate as thin as they can get away with, saying these bullets and your HSM's are most likely manufactured twins.