Home
Posted By: RDW Federal 50gr WMR - 02/03/19
Even though my RAR shoots all tipped 30gr better, really signficantly better than 40gr ammo, I see Federal lists a 50gr JHP.

Anyone shooting this round and if so, how is the accuracy?
Posted By: PaulBarnard Re: Federal 50gr WMR - 02/03/19
I have 3 22 magnum rifles. My Ruger 10/22 won't stabilize the Fed 50. It is sub MOA with CCI plastic tip 30 grain. My Ruger 77/22 loves both the CCI 30 grain plastic tip and 50 grain Federal. Sub MOA with both at 50 and with the Fed 50 at 100. I have 2 range trips with my RAR Predator. Both days were windy. My notes just say "potential" next to the Fed 50 load. I have to find a calm day to get a good feel for how that rifle likes it. I'd say it's definitely worth a try. It's a pretty stout bullet that needs some resistance to open it up.
Posted By: OSU_Sig Re: Federal 50gr WMR - 02/03/19
I have some to try but have not done so yet. I think the 50 grainer would be devastating in a short barreled defense revolver.
Posted By: ratsmacker Re: Federal 50gr WMR - 02/03/19
I have a stainless RAR that likes them. It likes 40gr. CCIs a little better, and the POI changes a bit at 100 yards with the 50s, but the group size is comparable (just under an inch on a still day). I like the 50s, but I think their utility is limited to larger varmints like coyotes, bobcats, and badgers.
For other critters, the 40s are probably better, they shoot flatter than the 50s, but if you can call in the larger critter, the 50s are probably a better choice. Keep the ranges under 125 yards or so.
Posted By: DakotaDeer Re: Federal 50gr WMR - 02/04/19
I used to use them out to 125 yards. They worked fine on woodchucks, fox, and coyote (the latter does best with a shoulder shot so they don't run). They were accurate enough in a Marlin 882 to make head shots on woodchucks out to 125.
Posted By: ring3 Re: Federal 50gr WMR - 02/04/19
My 22WMR all prefer the 30g CCI and Hornady V-Max. Close second are CCI 40g HP and Aguilar Silver Eagle. Last year I bought a couple boxes of the Fed 50g to try. RAR didn’t like them while the 783 shot them ok. I plan on experimenting more this year. Have been picking up a variety of 22 WMR ammo. Nice to have options again.

Rob
Posted By: RDW Re: Federal 50gr WMR - 02/04/19
It seems backwards to use the 30gr in the WMR even though they shoot good, 40gr would be fine but 45-50gr in my mind would be about right.

I will buy a few boxes of 45-50 including Federal and if none work, I did stock up on the tipped 30gr.


TargetSports has these but not all are in stock:

Hornday Critical Defense Flex Tip 45gr

Federal Game-Shoc 50gr

Winchester Dyna Point 45gr

Winchester Super-X 45gr


Are there others?
Posted By: Dirtfarmer Re: Federal 50gr WMR - 02/04/19
I've accumulated a nice sampling of .22 WMR ammo, including the 50 gr. Fed, to try when the weather gets right.

It will be interesting. I have a plastic stock T-Bolt and a single shot Handi Rifle. Will see how they shake out, what ammo they like or don't like.

DF
Posted By: deflave Re: Federal 50gr WMR - 02/04/19
Never heard of them. Gonna have to try a box.
Posted By: Castle_Rock Re: Federal 50gr WMR - 02/04/19
Accuracy is average and POI is so far away from anything else that I gave up on it.
Posted By: PaulBarnard Re: Federal 50gr WMR - 02/04/19
Originally Posted by Castle_Rock
Accuracy is average and POI is so far away from anything else that I gave up on it.


You got that right. In my one gun that loves it, it will be the only ammo I use in that rifle.
Posted By: Son_of_the_Gael Re: Federal 50gr WMR - 02/04/19
Originally Posted by OSU_Sig
I have some to try but have not done so yet. I think the 50 grainer would be devastating in a short barreled defense revolver.


Like this one?

http://www.stdgun.com/s333-volleyfire/


No, really, I'm serious.
Posted By: Blackheart Re: Federal 50gr WMR - 02/04/19
Originally Posted by ratsmacker
I like the 50s, but I think their utility is limited to larger varmints like coyotes, bobcats, and badgers.
I don't know why you'd need the 50's for larger critters when I've shot the 40 Win. HP's completely through the rib box of 120-140 lb. deer more than once.
Posted By: ratsmacker Re: Federal 50gr WMR - 02/04/19
Originally Posted by Blackheart
Originally Posted by ratsmacker
I like the 50s, but I think their utility is limited to larger varmints like coyotes, bobcats, and badgers.
I don't know why you'd need the 50's for larger critters when I've shot the 40 Win. HP's completely through the rib box of 120-140 lb. deer more than once.




Because my rifle doesn't like the Winchester load at all. It shoots CCI and that Federal load quite well, but WInchester shoots like crap in my little Ruger.
Posted By: Blackheart Re: Federal 50gr WMR - 02/05/19
Originally Posted by ratsmacker
Originally Posted by Blackheart
Originally Posted by ratsmacker
I like the 50s, but I think their utility is limited to larger varmints like coyotes, bobcats, and badgers.
I don't know why you'd need the 50's for larger critters when I've shot the 40 Win. HP's completely through the rib box of 120-140 lb. deer more than once.




Because my rifle doesn't like the Winchester load at all. It shoots CCI and that Federal load quite well, but WInchester shoots like crap in my little Ruger.
The 40 gr CCI's should work about as well as the Win's. I can't tell much difference on game.
Posted By: TNRock Re: Federal 50gr WMR - 02/05/19
My magnum research shoots the Winchester, and cci great, it shoots the federal 50s a bit better but it shoots them all st the same poa/poi
Posted By: deflave Re: Federal 50gr WMR - 02/05/19
Originally Posted by Rockhound
My magnum research shoots the Winchester, and cci great, it shoots the federal 50s a bit better but it shoots them all st the same poa/poi


That's a keeper!
Posted By: OSU_Sig Re: Federal 50gr WMR - 02/05/19
Originally Posted by Son_of_the_Gael
Originally Posted by OSU_Sig
I have some to try but have not done so yet. I think the 50 grainer would be devastating in a short barreled defense revolver.


Like this one?

http://www.stdgun.com/s333-volleyfire/


No, really, I'm serious.

Yikes! That represents an attitude changer.
Posted By: cs2blue Re: Federal 50gr WMR - 02/06/19
I would try thr 50gr, in Ruger single six for my close ranges G-hogs. Out of the 5.5 inch barrel it would be a thumper! I currently shoot CCI 40gr HP load out of the pistol and it does a fine job of G-hogs. However, in my savage 93 the Hornady 30gr. V-max rules the day. I get an avg. of 2240 fps (chroned) from my 19 inch barrel. That 50gr load is interesting.
Posted By: Poodleshooter Re: Federal 50gr WMR - 02/12/19
Originally Posted by Castle_Rock
Accuracy is average and POI is so far away from anything else that I gave up on it.

That's been my experience, too. Their POI difference is the real killer for me. I'd rather have a rifle sighted so I can use several loads interchangeably, rather than sighted for one oddball POI.
Posted By: bsa1917hunter Re: Federal 50gr WMR - 02/12/19
Originally Posted by RDW
Even though my RAR shoots all tipped 30gr better, really signficantly better than 40gr ammo, I see Federal lists a 50gr JHP.

Anyone shooting this round and if so, how is the accuracy?



Excellent in my RAR. Yes, the poi changes, compared to the 30gr polymer tipped bullets. Who give a chit. Just adjust the little things on your scope that say up/down and right/left... If anyone needs instruction, let me know. First you got to pull those caps off, so you can get to the dial. Pretty simple really...
Posted By: RDW Re: Federal 50gr WMR - 02/13/19
That is my experience as well, changing ammo changes POI especially between the 30's and 40's.

I should have a few boxes by the weekend and will see how they do.
Posted By: PaulBarnard Re: Federal 50gr WMR - 02/14/19
Originally Posted by RDW
That is my experience as well, changing ammo changes POI especially between the 30's and 40's.

I should have a few boxes by the weekend and will see how they do.


I am curious to see how it works out.
Posted By: DigitalDan Re: Federal 50gr WMR - 02/18/19
Originally Posted by Son_of_the_Gael
Originally Posted by OSU_Sig
I have some to try but have not done so yet. I think the 50 grainer would be devastating in a short barreled defense revolver.


Like this one?

http://www.stdgun.com/s333-volleyfire/


No, really, I'm serious.



Laffin' I am.

Good Grief,

C. Brown
Posted By: RDW Re: Federal 50gr WMR - 02/25/19
The Federal 50gr were pretty bad at 100 yards, 4.5-5.25" ten shot groups, the 30gr Hornady were 1.5-2.25" and 40gr Winchester jacketed hollow points were about the same as the 30gr.

It was gusting pretty good at about 45 degrees but the 50gr bullets were stringing vertically, it wasn't the wind.

There is no 50 yard range where I shoot so I checked all the ammo at 25 yards, the 30gr ten shot group was .25" tall by .5" wide, the 50gr about a .7" cluster.

I don't remember what twist the RAR has or if it even makes a difference but no 45-50gr bullets works well in this rifle.

However, I do have a good 30gr and 40gr options.

Posted By: cs2blue Re: Federal 50gr WMR - 02/25/19
At a lased 112 yards with with a Remington 510 single shot 22lr 4 x scope made in 1940, with Remington subsonic SGB 22 lr ammo, thought it was Win PP Lr ammo with the Hanned line bullet nose mod flat Point, On a ground hog on all fours facing me. Also, I had some wind and held off reticle sub tension. Killed him dead with one shot. I still cannot believe I did that! my longest kill shot with a 22 lr to date.
© 24hourcampfire