Home
Posted By: Fotis Kinda proud today..... - 12/30/20
Nosler #9


[Linked Image from i.imgur.com]
Posted By: hanco Re: Kinda proud today..... - 12/30/20
Well..... you should be!!!!
Posted By: Fotis Re: Kinda proud today..... - 12/30/20
Thanks man!
Posted By: geedubya Re: Kinda proud today..... - 12/30/20
Mighty fine!

ya!

GWB
Posted By: Magnum_Bob Re: Kinda proud today..... - 12/30/20
Congrats Fotis well done. Mb
Posted By: MarineHawk Re: Kinda proud today..... - 12/30/20
Congrats Fotis.

Question: I get 3,140 fps for 225gr TTSXs loaded by Corbon: https://shopcorbon.com/index.php?ro...oduct_id=72&mfp=11-type-of-cartridge[Rifle]&page=3

Could you get more than 3,180 fps with 225gr bullets in the .338-375 if you wanted to do so? Or is Corbon pushing the limits too far with the .340?
Very nice..
Posted By: Hookset Re: Kinda proud today..... - 12/30/20
very cool!
Posted By: Fotis Re: Kinda proud today..... - 12/30/20
Originally Posted by MarineHawk
Congrats Fotis.

Question: I get 3,140 fps for 225gr TTSXs loaded by Corbon: https://shopcorbon.com/index.php?ro...oduct_id=72&mfp=11-type-of-cartridge[Rifle]&page=3

Could you get more than 3,180 fps with 225gr bullets in the .338-375 if you wanted to do so? Or is Corbon pushing the limits too far with the .340?




I can't say for sure. Either some kind of special canister powder or at the pressure limits.
I can tell you that after I reached that particular velocity and my 338-378 and this type of accuracy I just stopped. See below.

https://imgur.com/VLHa0wV
Posted By: PaulBarnard Re: Kinda proud today..... - 12/30/20
That's really cool Fotis!
Posted By: skeen Re: Kinda proud today..... - 12/30/20
Originally Posted by Fotis
Nosler #9


[Linked Image from i.imgur.com]

Alright, Fotis!
Posted By: MarineHawk Re: Kinda proud today..... - 12/30/20
Originally Posted by Fotis
I can't say for sure. Either some kind of special canister powder or at the pressure limits.
I can tell you that after I reached that particular velocity and my 338-378 and this type of accuracy I just stopped. See below.

https://imgur.com/VLHa0wV


Thanks for the reply, Fotis. Nice grouping.

The one above is the most accurate load I ever have shot in any rifle. I have shot scores of them, with no issues, except that once, and only once, the bolt kind of stuck a bit. So, I was wondering if they were pushing it a little much. I was chronoing them at 3,160 fps ten years ago, but the loads I have bought in the last seven or so years have come out 20 fps lower. So, unless it's a chrono aberration, they may have lightened the load a bit.
Posted By: Fotis Re: Kinda proud today..... - 12/30/20
If the bolt stocks then they are pushing some pressure. The best I can get from my 340 Bee is 3150 fps with the 210 TTSX.
Posted By: MarineHawk Re: Kinda proud today..... - 12/30/20
Originally Posted by Fotis
If the bolt stocks then they are pushing some pressure. The best I can get from my 340 Bee is 3150 fps with the 210 TTSX.


That's what I was thinking, but, since it's only happened once, I keep shooting it because it's soo dang accurate outta my Accumark.
Posted By: MagMarc Re: Kinda proud today..... - 12/30/20
Congratulations!
Posted By: Cattledog Re: Kinda proud today..... - 12/30/20
Well done, Sir. Congrats!
Posted By: jwall Re: Kinda proud today..... - 12/30/20
Congrats Fotis

That’s a HI mark of achievement AFAIC !!

Well Done.

Jerry
Posted By: devnull Re: Kinda proud today..... - 12/30/20
Awesome, Fotis!
Posted By: jimmy3 Re: Kinda proud today..... - 12/30/20
Published......awesome😎
Posted By: kingston Re: Kinda proud today..... - 12/30/20
Super cool! Congratulations!
Posted By: ingwe Re: Kinda proud today..... - 12/30/20
WOOT! WOOT!

I did a page in the Barnes #3 Manual and again in the Barnes #4 Manual....


We're famous! laugh
Posted By: Fotis Re: Kinda proud today..... - 12/30/20
Originally Posted by ingwe
WOOT! WOOT!

I did a page in the Barnes #3 Manual and again in the Barnes #4 Manual....


We're famous! laugh

Awesome man!
Posted By: evans1010 Re: Kinda proud today..... - 12/30/20
Something to be very proud of, congratulations!
Nick
Posted By: ttpoz Re: Kinda proud today..... - 12/30/20
Excellent! Good for you
Posted By: hanco Re: Kinda proud today..... - 12/30/20
I didn’t know you was a celebrity. How much for an autograph???
Posted By: SS336 Re: Kinda proud today..... - 12/31/20
Very impressive and damn cool.
Posted By: Higginez Re: Kinda proud today..... - 12/31/20
Super cool.

Which is rather axiomatic.
Posted By: roundoak Re: Kinda proud today..... - 12/31/20
Thanks for sharing your accomplishment. Cool beans!!
Posted By: TRexF16 Re: Kinda proud today..... - 12/31/20
That is a very nice write up! Congratulations on it.
I have been largely disappointed by the #9 (they dropped the .358 Winchester and .284 Winchester from the lineup - blasphemy!! LOL)
But the thing I have really enjoyed about the new manual is the new cartridge "intro write-ups" like yours. Thanks again.

Rex
Posted By: hanco Re: Kinda proud today..... - 12/31/20
Originally Posted by TRexF16
That is a very nice write up! Congratulations on it.
I have been largely disappointed by the #9 (they dropped the .358 Winchester and .284 Winchester from the lineup - blasphemy!! LOL)
But the thing I have really enjoyed about the new manual is the new cartridge "intro write-ups" like yours. Thanks again.

Rex


I can’t believe they dropped those two.
Posted By: Full3r Re: Kinda proud today..... - 12/31/20
Super cool man. Congrats
Posted By: DigitalDan Re: Kinda proud today..... - 12/31/20
😎
Posted By: Mike_S Re: Kinda proud today..... - 12/31/20
Congratulations
Posted By: slabslapper Re: Kinda proud today..... - 12/31/20
Congrats. Cool indeed...

Best Regards
Posted By: jeeper Re: Kinda proud today..... - 12/31/20
Originally Posted by Fotis
Nosler #9


[Linked Image from i.imgur.com]



Congratulations.
Posted By: Motown Re: Kinda proud today..... - 12/31/20
Thats freaking awesome!
Very cool
Posted By: Big Stick Re: Kinda proud today..... - 12/31/20
Fhuqking HILARIOUS!!! Hint.

THE Dumbest Of Fhuqks,sucks enough ass to drool in THE schittiest of Manuals and for some "unknown" reason,she TRIES to take a stab at BC and throat geometry! I'm fhuqking crying I'm laughing soooooooooo fhuqking hard!!! Hint.

Here's to the fhuqking HILARITY that are ALL things Nuzzler and their fhuqking AMAZINGLY Low "Standards". Hint.

Like having Shefire in a Sierra Manual and JeffZero in charge of packaging!!!

Hint.

LAUGHING!...................
Posted By: Fotis Re: Kinda proud today..... - 12/31/20
Thanks for your kind words everybody.

As for stick....well we all know stick.

What have you accomplished in your miserable life?
Posted By: GRF Re: Kinda proud today..... - 12/31/20
Nicely done Fotis!
Posted By: jimy Re: Kinda proud today..... - 12/31/20
That is the coolest thing ever, you have turned a lifetime of work, in to something that will last into infinity ! Congratulations !
Posted By: OAM Re: Kinda proud today..... - 12/31/20
Immortalized! Nice work! I haven't been on the forum for several months. Disappointing to see Stick still here...
Posted By: SuperCub Re: Kinda proud today..... - 12/31/20
Originally Posted by Big Stick
Fhuqking HILARIOUS!!! Hint.

THE Dumbest Of Fhuqks,sucks enough ass to drool in THE schittiest of Manuals and for some "unknown" reason,she TRIES to take a stab at BC and throat geometry! I'm fhuqking crying I'm laughing soooooooooo fhuqking hard!!! Hint.

Here's to the fhuqking HILARITY that are ALL things Nuzzler and their fhuqking AMAZINGLY Low "Standards". Hint.

Like having Shefire in a Sierra Manual and JeffZero in charge of packaging!!!

Hint.

LAUGHING!...................


Be all you can be with that extra chromosome.

[Linked Image from i.imgur.com]


Posted By: chamois Re: Kinda proud today..... - 12/31/20
Cool!
Posted By: Big Stick Re: Kinda proud today..... - 12/31/20
Superkchunt,

Ain't it a hoot,that you gotta steal pics to reiterate that you are a Whining Crying CLUELESS Fhuqk...you "lucky" kchunt. Hint. Congratulations?!?

Nuzzler "rules". Hint. LAUGHING!

[Linked Image from imagizer.imageshack.com]

Bless your heart for Lying,Whining and Crying.

Hint.

LAUGHING!..................
Posted By: dvdegeorge Re: Kinda proud today..... - 12/31/20
Very cool Congrats!
Posted By: SuperCub Re: Kinda proud today..... - 12/31/20
Originally Posted by Big Stick
Bless your heart for Lying,Whining and Crying.

Hint.

LAUGHING!..................


Happy New Year Larry olde boy ........ Wishing you all the best in 2021. smile
Posted By: Big Stick Re: Kinda proud today..... - 12/31/20
Superkchunt,

Mebbe "explain" how you can read my Post,despite your "heralded" Imaginary Pretend Ignore...you "lucky" kchunt. Hint. Congratulations?!?

Bless your heart,you Lying Piece Of Fhuqking Schit.

Hint.

LAUGHING!..............
Posted By: SuperCub Re: Kinda proud today..... - 12/31/20
Originally Posted by Big Stick
Mebbe "explain" how you can read my Post,despite your "heralded" Imaginary Pretend Ignore...


I don't have you on ignore. I might have at one time but I realized I like reading your simple blatherings. It makes me feel smart.

All the best in 2021. smile
Posted By: lone wolf Re: Kinda proud today..... - 12/31/20
Congratulations! Nice job.
Posted By: Fotis Re: Kinda proud today..... - 12/31/20
Again thanks to all that's for big stick that's a cross we all got to carry.
Posted By: Big Stick Re: Kinda proud today..... - 12/31/20
Superkchunt,

I rather enjoy your "justifying" that you just "happen" to be a Lying Piece Of Fhuqking Schit...you "lucky" kchunt. Hint. Congratulations?!?

It is VERY "surprising" to learn,that you were glued to my every word and Splendid Pixel all along,despite your contention to the contrary. Hint. LAUGHING!

Bless your heart,you are being "smart".

Hint.

LAUGHING!...............








Kchuntis,

Stupidity isn't a "choice",but rather a plight and them differences are stark...you "lucky" kchunt. Hint. Congratulations?!?

Fortunately for you,the only thing Nuzzler requires is suction. Hint. LAUGHING!

Bless your heart,for for doing your BEST.

Hint.

LAUGHING!.................
Posted By: dye7barrel Re: Kinda proud today..... - 12/31/20
Super cool, nicely done
Posted By: Fotis Re: Kinda proud today..... - 12/31/20
And I ask you again loser What have you accomplished in your miserable life?
Besides getting people to either hate you or feel sorry for you. I fall in the latter FYI
Posted By: 444Matt Re: Kinda proud today..... - 12/31/20
Wow very cool indeed! Congratulations
Posted By: Big Stick Re: Kinda proud today..... - 12/31/20
Kchuntis,

Pardon the poignant profundity of my influence,as you can't even start a Thread without conveying that Imitation is THE most Sincere form of Flattery...you "lucky" kchunt. Hint. Congratulations?!?

I very much enjoy that besides being a CLUELESS Drooling Dumbfhuqk,that you also just "happen" to be a Lying Piece Of Fhuqking Schit,as you yet again "forgot" about your "heralded" Imaginary Pretend Ignore. Hint. LAUGHING!

Kudos on your Crying Karen Routine being no "act",as you repeatedly meltdown. Hint. LAUGHING!

Bless your heart for Lying,Crying,Trying and Whining.

Hint.

LAUGHING!................
Posted By: Fotis Re: Kinda proud today..... - 12/31/20
Bla bla bla loser. God forbid you don't fokk up a thread. Like locusts man!
Posted By: Hawk_Driver Re: Kinda proud today..... - 12/31/20
Very cool, congrats!
Posted By: texken Re: Kinda proud today..... - 12/31/20
well done
Posted By: HTDUCK Re: Kinda proud today..... - 12/31/20
Congrats Fotis !
Well done.
Posted By: Hudge Re: Kinda proud today..... - 12/31/20
That’s awesome! Congratulations
Posted By: lightman Re: Kinda proud today..... - 01/01/21
Thats really cool! Congratulations!
Posted By: AbeJohnsen Re: Kinda proud today..... - 01/01/21
Congrats man , well deserved.
Posted By: WAM Re: Kinda proud today..... - 01/01/21
Congrats, Fotis!
Posted By: Fotis Re: Kinda proud today..... - 01/01/21
Thanks all. Happy New Year
Posted By: JBabcock Re: Kinda proud today..... - 01/01/21
Congratulations. Well done.

There’s always that guy who has to go around and sniff the seats where folks was sitting, to see if it really smelled schity That’s our boy stick!

What a Trojan Collector.
Posted By: Fotis Re: Kinda proud today..... - 01/01/21
Originally Posted by JBabcock
Congratulations. Well done.

There’s always that guy who has to go around and sniff the seats where folks was sitting, to see if it really smelled schity That’s our boy stick!

What a Trojan Collector.



Man did you hit it on the head. It's easy losers like him who never accomplished anything in his life have got to bring other people's lives down don't let him do that
Posted By: MarineHawk Re: Kinda proud today..... - 01/01/21
Originally Posted by Fotis
Thanks all. Happy New Year


Congrats again! and Happy New Year back!

My fiance passed out about an hour ago.
Posted By: PennDog Re: Kinda proud today..... - 01/01/21
Well done and deserved Fotis - congratulations! Now we can all say we knew you when!!

PennDog
Posted By: hanco Re: Kinda proud today..... - 01/01/21
Pretty cool to know a celebrity!!!
Posted By: Hook Re: Kinda proud today..... - 01/01/21
Congratulations, Fotis!
Posted By: WAM Re: Kinda proud today..... - 01/01/21
Originally Posted by JBabcock
Congratulations. Well done.

There’s always that guy who has to go around and sniff the seats where folks was sitting, to see if it really smelled schity That’s our boy stick!

What a Trojan Collector.

LOL!
Haven’t heard that one in a long time! Fitting......
Posted By: GreggH Re: Kinda proud today..... - 01/01/21
Pretty cool Fotis.
GreggH
Posted By: 3bird Re: Kinda proud today..... - 01/02/21
Good job!
© 24hourcampfire