Talley lightweights/pre 64 mod 70 - 01/15/21
For those of you who have put Talley Lightweights on a pre 64 mod 70 what height have you used? Will the low ones allow the bolt to clear a Leupold VX- 11 40mm scope?
Re: Talley lightweights/pre 64 mod 70 - 01/15/21
Yessir you’ll be fine with Lows. They clear but it ain’t much. Probably 1/6”+or so on mine.
Re: Talley lightweights/pre 64 mod 70 - 01/15/21
Originally Posted by gunnut308
Yessir you’ll be fine with Lows. They clear but it ain’t much. Probably 1/6”+or so on mine.
It may even rub a tiny bit, but should still function.. Wouldn't be the first one with a wear line on the bolt handle...
Re: Talley lightweights/pre 64 mod 70 - 01/15/21
I agree, the lows should be fine, I have them on most my pre 64 M70's.
Re: Talley lightweights/pre 64 mod 70 - 01/15/21
Concur with Randy, no problem with Talley LW's.
Re: Talley lightweights/pre 64 mod 70 - 01/15/21
I just file the bolt handle a bit if they rub.
😉
😉
Re: Talley lightweights/pre 64 mod 70 - 01/15/21
[quote=AKwolverine]I just file the bolt handle a bit if they rub.
Gasp!
Gasp!
Re: Talley lightweights/pre 64 mod 70 - 01/15/21
Minimum clearance agenda, pack a fingernail trimmer along with ammo & other stuff! Better yet, perhaps a nineteen year old manicurist accompanying? Conversely, simply taller rings may be considerably less pesky than to "tally" divorce costs!
Just my take!
Best & Stay Safe!
Anonymous!
Just my take!
Best & Stay Safe!
Anonymous!