Help Please - Remington 700 BDL to ADL Conversion

I've got a Remington 700 Stainless Steel, long action, BDL and have bought a new ADL stock.

What components can be reused, what other parts will I need?

Thanks in advance.

The spring and follower will work. You need a mag box and a triggerguard. I also believe there is a tiny screw that holds the mag box in place.

You need a spring(yes it is specified in the remington part list)
magazine box screw stainless
ADL Triggerguard

Thanks.

Does the BDL have the tapped hole for the small screw that holds the mag box?

Will I need new screws to hold the stock to the action?

Where would you buy this "small" stuff?

I've used the BDL spring.

BDL spring will work. Get a trigger guard and mag box+retainer screw.

ebay is a good source.

The BDL spring will work. The only difference is a tiny kink in the bottom of the spring to ride smoothly on the bottom of the mag well.

You need:

ADL box
ADL magazine tab screw
ADL trigger guard
ADL centre action screw

The action will be tapped ready to go to ADL, they are generic.

Brownells or midway should have what your looking for