Heads up! There's some .222 extractors that just landed on ebay. If anyone can point me to a 721, .473 extractor, I'd be VERY grateful. Have a great one, y'all.

Man, I could use one in .473 as a spare too. They are hard to find!

If they are the extractor that uses a rivet, I believe Brownells carries them.

Thanks! I grabbed one just in case...

Any input on this: Extractor on Ebay

I've corresponded with the guy. The .515 measurement is on there because of my question. The gentleman is a "handgun" Smith doesn't know much about them. He's probably putting "used" because he doesn't know. He also has no packaging telling him part number. Based on the measurement I'm fairly sure they are for std bolt face?

Opinions... Would you buy?

Any input, or anyone that would know well the dimensions of a .473 bolt face extractor to know that these are indeed the right size?

Thanks.

That should be right for a .473ish bolt face, unless the bolt's been modified. Mine measures a few thou bigger, but same design.

Thanks Shooter! I've measured mine and it looks fairly close, but I appreciate your input.