Got this in from Cali a few weeks ago. Haven’t had the time to get out and hurt feelers with it or post pics, but it’s looking WAY more than capable....

6 BRX .120 freebore .292 neck
Bighorn TL3
Hawk Hill 7 twist Marksman
Trigger Tech Diamond
KRG Bravo temporarily

108s running 2970 on FF’d brass don’t suck. Trued DOPE out to 1200 and reckon it’ll make the cut. Top plate is 3 @ 600, second is 1k with a 1/10 put in after the first shot low. ES/SDs are single digits....

He put the bolt on the wrong side bro.... you’re gonna need a passenger side Tac-Door...

Nice dude....

I'd put at least a roll of tape somewhere on that rifle just to make it legit you know.....

SWEET!!!

30”??

Nice rifle. And great shooting

That is a rig!

Yeah ......... THAT don't suck !!!

NICE setup !!! And mighty fine piece o shootin' !!!! 👍👍

No sweat... I work out and have my own personal gun caddy...



Noted...obliged!



26”

Thanks men!

Too cool for school.....

Curious, (coming from a Dasher fan) why the BRX?

Very nice!

No excuses with that set up. What stock/chassis will it end up with?

I don't see many guys who switch to BR variants going away from them, even if George says they don't feed right.

What mags are you using? Everything seems to work decent out of my TL3 Dashers but the AW with HRD kit is the current go to if 10 rounds will suffice.

I’m all ears too as I’m on the edge of building a straight 6mm BR—I think... I’ve got a pair of MDT’s BR mags and 500 pieces of Lapua 6BR Brass in hand. An Ultimatum Precision Deadline is enroute and I’m all but settled on a MPA BA Chassis. I’m thinking a 1:7.5 twist Heavy Palma 28”-30”

Barrel life and no fuss brass led me to the BR. Yet, I still waffle and wonder if I shouldn’t go BRA. The short neck of the BRX was a theoretical turnoff—fretting concentricity issues when feeding loaded rounds out of a mag. Those long bullets have lots of leverage on the short neck.

Working against the Dasher are it’s shorter barrel life, rapidly eroding throat, and chasing tune.

Ultimately, I’m thinking a straight 6 BR will allow me to spend more time shooting and less time fussing over reloading minutiae.

Not sure where that's coming from......

The last Dasher barrel I took off my 1K BR gun had 2600 rounds through it. Never once did I adjust the original load of Varget, running 105 VLD's at 3080, besides adjusting the seater occasionally. In fact, I've never changed any Dasher load after initial load development.

+1

Well, that's good news.

How's your reamer throated?

.104"......I've never shot anything but Berger 105 VLD's.....

What is your OAL with the Berger, and how far into the lands does that put you - if you don’t mind me asking?

Around 2.40" OAL, give or take depending on lot #, in the lands around 15 thou.

The 6mm BR platform is intriguing, how about the feed issue?

Must be some gawd awful thick necks.......

I heard Raptors come ambidextrous now so you should be good for, "whatever"....



X-VERMINATOR

Pics reversed? I didn't think the KRG Bravo was available for Lefty's?

Cause BRX sounds cooler than something named after a reindeer? Just waiting on the Prancer edition....grin...
Nah, nothing against the Dasher. Just wanted to steer on the side of caution with feeding a skosh and keep the original 30* shoulder. I have run both quite a bit and have had ZERO feeding issues with properly tuned mags. Am running a straight BR on my AIAT and thinking ahead I wanted to go BRX there too whenever that barrel goes. Or it may just go on a trip to Shaen purty quick and get the same reamer as the TL3. It's a shooting SOB so should probably just leave it alone.



Might try a Foundation, but it'll probably see a T5A in the future. Still HARD for me to get away from that stock...thanks to you....(Ol Blue finally went in for another tube a couple weeks ago)
Not sure what George you are referring to, but I have my guess. No issues getting them to feed here, but I didn't have any problems feeding the 6.5 SAUM cases out of BDL boxes either...grin...
HRD kits in the AW mags are the TITs and that's what I'm running in my AI with the standard 6 BR. Slumming the MDTs right now in the TL3 until I can get the time to get a few AWs set up. They haven't given me an ounce of trouble in 350ish rounds, but don't feed near as slick as the HRD kits. And good phuggin luck getting 12 in them.....but no worries here.



Never heard much of this being an issue either. Nor the short neck causing excessive leverage on the case mouth in the BRX. Reckon properly setup and tuned mags would minimize that quite a bit if it were an issue. Lots of guys running the BR variants, and like Carl said, few seldom go back. I know I'm through chasing tune and lands every 200-250 rounds in the 6 CMs, granted I'll still keep a couple around. For me in this deal it's not a recoil argument, but more so a barrel life and minimal tuning argument.

You just cost me a trip to the local Ford dealership you bastid.

Baddest truck on the planet, think I'll just order up 3 or so....grin....

No sir...trick photography is only for horn shots....

A good handyman with a mill can turn a right handed stock into a southpaw without much fuss. I for one am not much on wait times and have had Shaen take a couple other RH Manners and mill them where I can run both right handed and left handed actions in the same stock. Milling the rear of the ejection port flat with the top of the stock and adding the bolt handle mortise on the left side is all that needs to be done....
The Bravo and other chassis just need the bolt mortise.

My daughter shoots right handed so I can plug and play with two actions on several stocks and configure rifles however I want in under 10 min.

Rescue Raptoooooooooor!

OMG !



X-VERMINATOR